Re: PDAJ's Clean WM6.5 ROM 4 Apache
not working for me stupid cricket <<<<< if dats da case i have a verizon built one
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Well, what's not working? No service at all? No MMS/internet? No boot? Just enter in your data again into EPST, hard resets and ROM flashes can screw up the settings, happened to me once on my v1.00 apache, worked fine one day, flashed, next thing I know none of the settings are close to right. MDN of 0000000261 is nowhere near correct, I don't care WHERE you live. Well, ok if you were the 261st person to ever have sprint and lived at the core of this planet, maybe it would be valid....rant over, back on topic.
Check through your settings again, I'm sure if it's a no service issue it's just gonna need programmed again, not a real big deal, if you need info call cricket, write it down, and stick it someplace safe for later flashes. |
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Quote:
How do I check my bootloader? Thanks! |
Re: PDAJ's Clean WM6.5 ROM 4 Apache
I think they meant EPST, QPST is the software used to access the CDMA portion of the phone from windows.
Sharob57, does the code ##778# not work at all, or your 000000 code doesn't work anymore? It's possible the MSL got changed somehow, but it can be reset to all 0's by using SE47 or other software to read/write the MSL. rhino..edit is just for stuff like this, instead of posting twice just edit your first post. Press and hold the power button on top, record button on the side and reset in the bottom of the phone. The screen will go dark, use a flashlight or something and it will say Vx.xx on the bottom of the screen, thats your version. |
Re: PDAJ's Clean WM6.5 ROM 4 Apache
I downloaded v1.00-v1.02-v2.02 for my Bootloader v2.02
I followed the step by step instructions The only part I got stuck on was after I hard reset, it stays stuck on the bootloader screen after pressing "Y" and "Space" for the hard reset Help please |
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Quote:
Never mind, I figured it out, the following site gave instructions: http://forum.xda-developers.com/showthread.php?t=304408 |
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Ok, sorry I will remember that next time. I am new :), I am sure you picked up on that.
But thanks for the answers! |
Re: PDAJ's Clean WM6.5 ROM 4 Apache
No prob I know not all forums have an edit ability, but here they do, and I use it 343232 times a day.
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
installed it on my device working like a charm.thanks
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Quote:
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Quote:
Do you happen to be working on 21869? I have built numerous builds in the kitchen and they all just halt on a blank screen so it seems I am over my head :D Just need a simple ROM: - Verizon - Bootloader 2.05 - Camera support - Memory Card support - I think bluetooth PAN (not DUN) is native to the O/S but if not than BT PAN ability if available Got everything else I need in cabs... Thanks! |
Re: PDAJ's Clean WM6.5 ROM 4 Apache
PDAPhoneJunkie , your ROM very fast and stable. Thank you.
Installed about 2 weeks on Altell v.1.00 :occasion5: |
Re: PDAJ's Clean WM6.5 ROM 4 Apache
thanks PDAJ.I used your 6.1 rom too and it was good.And to kuku wa zabanga; its great to see a fellow kenyan on ppcgeeks .i have a sprint ppc 6700 on telkom wireless.would you happen to have internet settings so that i can use it to surf without tethering it to a laptop?
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
i keep getting that blasted country error idk wat to do sigh help
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Quote:
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
how do i back up my windows mobile 6.1 rom? before i upgrade to 6.5?
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Hello all, I've had to revert back to my XV6700 and I thought I would flash it with a new kitchen. First problem of the day is I can't get a data connection (Internet Explorer). Any thoughts?
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Quote:
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Quote:
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Does anyone else have "Contacts" for both soft buttons when showing the Today screen in non-default?
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Hey PDAPhone, how are the new ROMs coming? I have tried flashing both ROMs you posted. One ends up being an Error 150 (wrong for device) and the other is Error 120 (Country ID). When I go into bootloader, it says I have v1.02 on the bottom. Is there a chance when I reverted from v1.04 to v1.02, it just changed what was displayed on the screen, but didn't actually change the bootloader? Any help is greatly appreciated. You seem to be one of the only people that actually posts replies on here. Thanks.
-Jeron |
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Quote:
I got an xv6700 and tried flashing it with the 6.1 helmi 1.02 bootloader. My bootloader is 2.05. That bricked it and i am trying this rom. I get the 120 eroor with the 2.05 rom. How do i revert the bootloader? |
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Thanks so much. It was fairly easy to install and it works great. The only problem I noticed is that I cannot send MMS. I will play with that later.
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Use sMMS.
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
If you have Alltel there is a thread around here somewhere about that, apperntly something over this last week changed with that. BTW sMMS is only for Sprint users.
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Okay, here is the thread, http://forum.ppcgeeks.com/showthread.php?t=101526 I found it in the Vogue forums. But it should work. I'm not on Alltel so I don't follow them but I happen to see this thread. Hope it works for you.
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
PDAPhoneJunkie, how are the new ROMs you mentioned earlier in this thread coming along? I have tried flashing both ROMs you posted. One ends up being an Error 150 (wrong for device) and the other is Error 120 (Country ID). I have bootloader v1.02. Any suggestions?
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Quote:
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
After upgrading to 6.5, I noticed that one of the default phone ringers (that had been there in 5.0 and 6.1) is gone. It was called OldPhone. I don't where default ringers are stored in Windows Mobile, otherwise I'd pull that one from one of my WM5 or WM6.1 backups. Anyone know how to restore it?
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Quote:
or 4shared.com/file/46490588/e0285903/Ring-OldPhone.html |
Re: PDAJ's Clean WM6.5 ROM 4 Apache
I am getting a error 120 country code error on my US based Sprint PPC 6700. Any and all help in resolving this will be highly appreciated.
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
hey man, can I flash to my apache without losing signal which not use burn number in the phone but insert sim card? I will appreciate :)
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
hi I need some help. i have been trying to put wm6 on my ppc 6700. i have downloaded the kicthen many times and i haven't been able toget it to work. is there any chance that some can give me a link to a download that works. My carrier is Sprint, thanks in advance.
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
=) ahora lo pruebo!
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
I cannot get either ROM listed to upgrade. I have a telus PPC 6700. Am I using the wrong ROM?
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
i really need help i am paying for a data package that i can't use because i can not get my phone linked to the web HELP i have done the #777 and it keeps coming back network log on there is no certificates on this phone nor does it show there is anything HELP! i like having to use things i pay for the person i purchased this from used the net on it and he said it worked xv6700 vzw needs help please i don';t have the getting started cd and this is driving me insane please help me.
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
Hello can anyone please help me i have the verizon vx6700 and im stuck in bootloader my verison is v 1.02 and I keep getting error 150 I dont really know what im doing wrong. Thank you I really would apperciate it.
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
i know that i cna't brick my apache but it doesn't fell that way when i can't load any roms one for variaus errors
|
Re: PDAJ's Clean WM6.5 ROM 4 Apache
PDAPhoneJunkie - Thank you so much for all your hard work. I used your ROM "PDAJ Apache WM6.1 v2.02" for a while before I got comfortable with BuildOS. Now I can't get WM6.5 + Office to build using the new buildOS (size is too big) so again I turned to you. This ROM is very stable and faster then my WM6.1 was. Now all I have to do it get MMS to send and I'll be set. THANK YOU!!!!
abourang - See if this helps (remove spaces) -> http : // forum . xda-developers . com / showthread . php?t = 304408 |
Re: PDAJ's Clean WM6.5 ROM 4 Apache
i mucked up my phone --- its was loading then got to 99% and died i was hoping for 100% but got some-sort of error instead
i have been getting errors --many different errors since the 99%problem i feel like i have tried all the different loaders expect the right one |
All times are GMT -4. The time now is 07:27 PM. |
Powered by vBulletin® ©2000 - 2024, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com