12-12-09] [WM 6.5 & WM 6.5.3] eRice CleanROM and Kitchen <~Latest: 21876 & 28002 ~>

[Yay 4 Juggs]

ok so after building with the 1.3 kitchen a few of us are experiencing modem issues that werent present in the first build...can you tell me what it was you did different between 1.1 and 1.3...originally you were trying to fix a charging issue in 1.1.

[electronicrice]

Originally Posted by Yay 4 Juggs

ok so after building with the 1.3 kitchen a few of us are experiencing modem issues that werent present in the first build...can you tell me what it was you did different between 1.1 and 1.3...originally you were trying to fix a charging issue in 1.1.

Well in 1.0, I used the USCC test rom as a base for EXT and OEM. Basically I found that overall this build would present some issues with pressing softkeys and select fields on the touchscreen (most notably the text messaging screens). In 1.1 I reverted back to stock Sprint for OEM, which contained the correct OEM Drivers for the CDMA phones. One thing in this build is it didn't create the modules for certain .dll's, so I had to copy some over from USCC only pertaining to the battery and LEDs fixing the charging problem. This became 1.2, however in 1.2 something must have either been deleted or changed which one I can't remember but it caused the phone to be unable to initiate a data connection. Upon fixing that with a fresh copy of the OEM folder and added the normal tweaks there based on 1.0 to 1.2, this became 1.3.

As far as the modem issues you're having, can you be a little more specific. Are you getting error numbers? I'm trying to figure out what it could be because I've been using Facebook, Twitter and tethered all day using the same kitchen that I uploaded no problem.

The only thing I'm aware of having an issue and that I can constantly reproduce is the problem with YouTube and QuickGPS sometimes not connecting despite starting the data connection and accessing it. This is a common problem even in MightyMike's ROM.

The main problem I see is, and correct me if I'm wrong, we don't have an official CDMA WM 6.5 build to pull an OEM folder from to copy drivers, programs, etc. other than this USCC test ROM that for some things, isn't all that great. Sure I can grab some stuff from the Imagio, but I'm leary to do so because they are essentially two different devices.

[jakdillard]

Originally Posted by electronicrice

Well in 1.0, I used the USCC test rom as a base for EXT and OEM. Basically I found that overall this build would present some issues with pressing softkeys and select fields on the touchscreen (most notably the text messaging screens). In 1.1 I reverted back to stock Sprint for OEM, which contained the correct OEM Drivers for the CDMA phones. One thing in this build is it didn't create the modules for certain .dll's, so I had to copy some over from USCC only pertaining to the battery and LEDs fixing the charging problem. This became 1.2, however in 1.2 something must have either been deleted or changed which one I can't remember but it caused the phone to be unable to initiate a data connection. Upon fixing that with a fresh copy of the OEM folder and added the normal tweaks there based on 1.0 to 1.2, this became 1.3.

As far as the modem issues you're having, can you be a little more specific. Are you getting error numbers? I'm trying to figure out what it could be because I've been using Facebook, Twitter and tethered all day using the same kitchen that I uploaded no problem.

The only thing I'm aware of having an issue and that I can constantly reproduce is the problem with YouTube and QuickGPS sometimes not connecting despite starting the data connection and accessing it. This is a common problem even in MightyMike's ROM.

The main problem I see is, and correct me if I'm wrong, we don't have an official CDMA WM 6.5 build to pull an OEM folder from to copy drivers, programs, etc. other than this USCC test ROM that for some things, isn't all that great. Sure I can grab some stuff from the Imagio, but I'm leary to do so because they are essentially two different devices.

DO NOT MIX ANYTHING FROM THE 6.1 ROM WITH A 6.5 BASE:
ok you stated that you mix some of the moduled drivers from the ussc rom with the oemdrivers from the spcs rom there is one of your problems the 6.5 drivers are designed differently and since the kernel is updated too some of the "old" drivers may fight with the new ... so either use all of the ussc drivers or all of the spcs drivers it is best to go ahead and clean out the ussc drivers since they match your kernel and ditch the ervius kitchen and make one of your own off of the prb script

[electronicrice]

Originally Posted by jakdillard

DO NOT MIX ANYTHING FROM THE 6.1 ROM WITH A 6.5 BASE:
ok you stated that you mix some of the moduled drivers from the ussc rom with the oemdrivers from the spcs rom there is one of your problems the 6.5 drivers are designed differently and since the kernel is updated too some of the "old" drivers may fight with the new ... so either use all of the ussc drivers or all of the spcs drivers it is best to go ahead and clean out the ussc drivers since they match your kernel and ditch the ervius kitchen and make one of your own off of the prb script

I'm trying that out now. Thank you for the help on that

[Yay 4 Juggs]

Originally Posted by electronicrice

Well in 1.0, I used the USCC test rom as a base for EXT and OEM. Basically I found that overall this build would present some issues with pressing softkeys and select fields on the touchscreen (most notably the text messaging screens). In 1.1 I reverted back to stock Sprint for OEM, which contained the correct OEM Drivers for the CDMA phones. One thing in this build is it didn't create the modules for certain .dll's, so I had to copy some over from USCC only pertaining to the battery and LEDs fixing the charging problem. This became 1.2, however in 1.2 something must have either been deleted or changed which one I can't remember but it caused the phone to be unable to initiate a data connection. Upon fixing that with a fresh copy of the OEM folder and added the normal tweaks there based on 1.0 to 1.2, this became 1.3.

As far as the modem issues you're having, can you be a little more specific. Are you getting error numbers? I'm trying to figure out what it could be because I've been using Facebook, Twitter and tethered all day using the same kitchen that I uploaded no problem.

The only thing I'm aware of having an issue and that I can constantly reproduce is the problem with YouTube and QuickGPS sometimes not connecting despite starting the data connection and accessing it. This is a common problem even in MightyMike's ROM.

The main problem I see is, and correct me if I'm wrong, we don't have an official CDMA WM 6.5 build to pull an OEM folder from to copy drivers, programs, etc. other than this USCC test ROM that for some things, isn't all that great. Sure I can grab some stuff from the Imagio, but I'm leary to do so because they are essentially two different devices.

to be more specific the #777 error still popped up randomly...while tethered the device would randomly soft reset itself...

[chazybaz13]

Am I the only who keeps getting errors during customization? Something about run xml appostconfig. code:0x80004005

[alexm]

Originally Posted by chazybaz13

Am I the only who keeps getting errors during customization? Something about run xml appostconfig. code:0x80004005

i was having that same issue in 1.1 and 1.3 and i redownloaded the kitchen and extracted again and since then i have not had any issues....

[electronicrice]

Alright so I'm pretty sure I have everything JD was trying to tell me squared away. I have a completely rebuilt full 6.5 kitchen with all 6.5 drivers. Putting the finishing touches on it and putting it through stress testing to make sure it's ready.

[rjmjr69]

Originally Posted by electronicrice

Alright so I'm pretty sure I have everything JD was trying to tell me squared away. I have a completely rebuilt full 6.5 kitchen with all 6.5 drivers. Putting the finishing touches on it and putting it through stress testing to make sure it's ready.

Great can't wait to try it out

[MrNybble]

Woot, I'll be waiting to give it a try.