[SPRINT RADIO Unlocker]Sprint RhodiumW WU Radio Unlocked for US Networks

[cmonex]

Originally Posted by dicast

Cmonex, thanks so much. more donation on it ways. Any idea what went wrong? alright, i dint finish the unlucker.

good question... was it Step 2 or Step 3? if you still can't sort it, send us a msg using the support page at our site.

[tr0s]

it would be my luck that you would be awake right now.... i just got pwnd by a celebrity. i was just tryin to say that i recall seeing it, but just like everything else they've told us.... you guys seem to find a workaround.

[eman]

What is an IMEI number???

[tr0s]

Originally Posted by cmonex

good question... was it Step 2 or Step 3? if you still can't sort it, send us a msg using the support page at our site.

on that note... i'm not sure if it's been addressed yet but i found the instructions on how to sim unlock pretty good all the way up to the end. that gui that pops up on the phone screen... there's not much description as to what each option does so the first time i did it i didn't select anything (the instructions say something like if you don't know what it means then don't mess with it). then when i went to flash the unlocked radio the phone soft reset and i got stuck in bootloader. all is well and i figured it out, i was just a lil confused on that screen.

[tr0s]

Originally Posted by eman

What is an IMEI number???

http://en.wikipedia.org/wiki/Interna...pment_Identity

[cyclical]

I have a Sprint TP2. If I sim unlock and flash this radio I will now be able to put in a ATT/Tmobile sim card into my Sprint phone and use it here in the US correct?

Will the phone operate on both Sprint/ATT at the same time? if someone calls my sprint number the phone will ring, if someone calls the ATT number the phone will ring?

Or do I have to tell the phone to operate on Sprint network and manually switch it to the GSM network when I want to use that network/receive calls?

I ask because I may be getting a cell phone at work and I believe they use ATT. I really don't want to carry around 2 cell phones.

I hope this made some kind of sense.

[ambush276]

this is more of a question for SPrint Users..

ok i got my device Unlocked and downloaded the sprint WU radio... (one in this thread)

now sprint data does not work? calls still work but the data is a nogo? is there going to be a 2.0 release of this or did i set something up wrong?

[bigchico67]

Originally Posted by cyclical

I have a Sprint TP2. If I sim unlock and flash this radio I will now be able to put in a ATT/Tmobile sim card into my Sprint phone and use it here in the US correct?

Will the phone operate on both Sprint/ATT at the same time? if someone calls my sprint number the phone will ring, if someone calls the ATT number the phone will ring?

Or do I have to tell the phone to operate on Sprint network and manually switch it to the GSM network when I want to use that network/receive calls?

I ask because I may be getting a cell phone at work and I believe they use ATT. I really don't want to carry around 2 cell phones.

I hope this made some kind of sense.

This is the way it works yes. You would set the device to automatic and when someone calls your sprint number the phone will ring, if someone calls your att number then your phone will also ring. The phone has two seperate radios so that is how it works. The sim card is what is atually activated so that is how gsm works and on cdma the esn (electronic serial number) is what is activated.

[isdnmatt]

Originally Posted by bigchico67

This is the way it works yes. You would set the device to automatic and when someone calls your sprint number the phone will ring, if someone calls your att number then your phone will also ring. The phone has two seperate radios so that is how it works. The sim card is what is atually activated so that is how gsm works and on cdma the esn (electronic serial number) is what is activated.

I don't think this is correct. You can have only one radio active at a time.

[Othelious]

Originally Posted by Lukemp3

It works great with my att sim, but i dont know how do configure the data to work

I went through the learning curve for this when I was in hongkong with my phone... You just have to go into the data settings for the gsm network, kind of similar to setting up the connection to dial the #777 for cdma, but much easier on GSM..

You just need one very important piece of information to get data to work, you need to know what AT&T uses for their access point name ( APN ) and put it into your data settings under GSM networks, it will have a single line that you put it into. A quick search on the internet shows that it should be public, or proxy depending on your connection plan, if its PDA for data it should be public.. if its just data, it could be either public or proxy. Here is a link to their page that tells you what the name is.

https://www.wireless.att.com/support.../KB/KB517.html

and to get into the settings to put this information in you need to go to the settings tab and click on the comm manager and click on the text area of your data connetion if you have the newer UI's and it will give you a setup wizard. just select at&t, if you don't have that, you need to go into all settings from the soft key on this screen, go into connections, select connections again, if you just have sprint here you need to add a new modem connection, select new, give it a name of AT&T, select the drop down and make sure you pick the GSM version of the connection, click next, then put the proper name into the APN slot, public or proxy, then finish.. you should now be able to use data on your AT&T sim as long as you have a dataplan setup.

hope this helps..