PPCGeeks
Page 100 of 233 « First 50909899 100 101102110150200 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   CDMA TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=98)
-   -   [HSPL-UNLOCKER] - - Rhodium W HardSPL (http://forum.ppcgeeks.com/showthread.php?t=93252)

ianderson_76 01-14-2010 04:57 PM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
Quote:
Originally Posted by DAD-PC (Post 1488231)
well, this isn't going as smoothly as it should...

I'm running this unlocker on Windows Vista 64bit, with administrator rights. I've downloaded the newest version of the unlocker, I'm extracted to an empty folder on the local disc. I've my Sprint HTC Touch Pro 2 in ActiveSync with my computer through usb. I'm connected to the internet.

When I run the Unlocker, it opens up to the window with the choice to do automatic or manual. I choose automatic. the Pop up with the Choose OK and wait, shows up. I click it. Immediately an error box pops up saying that the RhodiumW-HardSPL_V1_10R3.exe has stopped working. I can choose Debug or Close program, I choose debug, but nothing ever comes up to tell me what may be wrong.

This is my first time dowloading the program, so it would be my 'free use'. I believe I've followed every step in the first post, and on the link that leads to the unlocker.
I would try it on my other computer, but I run Ubuntu on it, and I'm not sure if this program is compatible with Linux or the Wine program.

Any advice or slaps upside the head with the obvious would be appreciated greatly.

Same thing keeps happening to me. But like someone said, for me at least, could be the IP address. I'll try another computer though. I don't think it will work with Linux because there is no Active Sync available for it (if it is, please let me know, I use Ubuntu as well).

Telek 01-14-2010 05:32 PM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
Quote:
Originally Posted by DAD-PC (Post 1488231)
well, this isn't going as smoothly as it should...

I'm running this unlocker on Windows Vista 64bit, with administrator rights. I've downloaded the newest version of the unlocker, I'm extracted to an empty folder on the local disc. I've my Sprint HTC Touch Pro 2 in ActiveSync with my computer through usb. I'm connected to the internet.

When I run the Unlocker, it opens up to the window with the choice to do automatic or manual. I choose automatic. the Pop up with the Choose OK and wait, shows up. I click it. Immediately an error box pops up saying that the RhodiumW-HardSPL_V1_10R3.exe has stopped working. I can choose Debug or Close program, I choose debug, but nothing ever comes up to tell me what may be wrong.

This is my first time dowloading the program, so it would be my 'free use'. I believe I've followed every step in the first post, and on the link that leads to the unlocker.
I would try it on my other computer, but I run Ubuntu on it, and I'm not sure if this program is compatible with Linux or the Wine program.

Any advice or slaps upside the head with the obvious would be appreciated greatly.
Do you have DEP enabled? If so try disabling it for the duration of the upgrade.

Telek 01-14-2010 05:33 PM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
Quote:
Originally Posted by ianderson_76 (Post 1488687)
Same thing keeps happening to me. But like someone said, for me at least, could be the IP address. I'll try another computer though. I don't think it will work with Linux because there is no Active Sync available for it (if it is, please let me know, I use Ubuntu as well).
The application crashing won't have anything to do with the IP address. Are you also on Vista-64 and running the app as admin? Do you have DEP enabled?

DAD-PC 01-14-2010 06:37 PM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
i have disabled DEP, and it still did not work, my anti virus (Avast) is turned off, as is the firewall. I've also tried disabling the Fast Sync option mentioned on page 97.
I will skim through these pages, and see if there might have been something I missed.

EDIT: Ok, it is the DEP, and I have set the EXE as an exception, but its still not working, it keeps popping up saying that Data Execution Prevention has closed this application. Do I have to stop DEP from the command line then?

DAD-PC 01-14-2010 08:25 PM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
Got it! had to uninstall the drivers, and reinstalled them for the phone. after that it worked beautifully! Thanks, donation on its way!

mylifeasapc 01-14-2010 11:03 PM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
Have tried literally everything I can think of to unlock this phone.

Verizon
RHOD500
SPL-0.63.0000

Automatic HardSPSL flash pulls a "Data corrupted" message after a few seconds no matter which stock ROM I'm running 6.1 or 6.5.

Battery and SD removed.

Unchecked/checked Fast USB settings. Didn't work.

Used SSPL, screen froze but never went to bootloader.

Tried putting phone into Bootloader mode then running the Manual mode. Doesn't recognize current ROM, once install begins it times out at 0% before Error 276.

If I hard reset, do i need to reactivate the phone first or wait and run this? I believe I've tried both now but its been so many times today I can't remember

If anyone has any ideas I'd greatly appreciate it!

Maxx134 01-14-2010 11:12 PM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
Im on Windows7.
Upon first connection to computer, it started install device drivers online before use with activesync.
Unzipped "RhodiumW-HardSPL_V1_10R3_100HSPL" and anti virus went crazy with trojan warning, I KNOW this was warned about, but why does it have be this way?
Edit: nevermind, virus progs dont like softwaretools.

Anyway I set antivirus to ignore without turning off any antivirus or firewall or DEP.
I just right clicked exe to run as administrator.
Everything then went smooth as butter :)

Thank You so much cmonex + Olipro, this is probably the singlular most important thing I do to my touch pro 2 :)

azz777 01-14-2010 11:20 PM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
SUBMITTED THIS ON SUNDAY NIGHT FOR HELP, AS OF 10:19 PM 1/14/2010 EST, ticket still open. I'd really appreciate it if you can give me some help. Thank you very much!

ticket # 868236
need for personal unlock of my tp2.
I unlocked for 1 friend on my pc about two weeks ago (his old pc broken down, new pc had't arrive). then when I bought my tp2, couldn't do it on my pc, and did it on his new pc tonight, still couldn't get it.
Thank you for your help.

ianderson_76 01-15-2010 01:19 AM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
Quote:
Originally Posted by Telek (Post 1488797)
The application crashing won't have anything to do with the IP address. Are you also on Vista-64 and running the app as admin? Do you have DEP enabled?
Me acutally knowing quite a bit about computers, knew that was not the problem but it was worth a try anyway. The real problem, would be the firewall blocking the connection and so the program has an error. So, I needed to use another computer without the firewall set so I could allow the connection.

azz777 01-18-2010 01:27 AM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
after waiting for exactly one week, I finally got my tp2 unlocked, thanks to cmonex, will donate soon.


All times are GMT -4. The time now is 10:52 AM.
Page 100 of 233 « First 50909899 100 101102110150200 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0