PPCGeeks
Page 3 of 31 12 3 4513 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   CDMA TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=98)
-   -   *Blazing Fast & Stable* Maverick MobileShell ROM *SYS 23135* UPDATED! (http://forum.ppcgeeks.com/showthread.php?t=133595)

Serofred 09-13-2010 04:13 PM
Re: *Blazing Fast & Stable* Maverick MobileShell ROM with overclocking. *SYS 23134*
 
So far I like the rom, it is fast and smooth. Very stable too.

pavanmaverick 09-13-2010 04:37 PM
Re: *Blazing Fast & Stable* Maverick MobileShell ROM with overclocking. *SYS 23134*
 
Okay, OP updated with screenshots :-)

kvictor017 09-13-2010 06:24 PM
Re: *Blazing Fast & Stable* Maverick MobileShell ROM with overclocking. *SYS 23134*
 
Ok. So far so, good. It's been a while since I used SPB MS. So that takes some getting used to. The battery life is not very good imo (due to overclocking no doubt), and I had to manually program my internet connection settings as well. (verizon) I did notice a little choppiness when using Opera or when inputting text or when going from portrait to landscape. One more thing, how do we get the full qwerty keyboard onscreen????? That little tile one, well.....sucks.

But overall, it's a good and snappy rom and i'm having fun playing around with Mobile Shell. Keep it up!

dwmackay 09-13-2010 08:33 PM
Re: *Blazing Fast & Stable* Maverick MobileShell ROM with overclocking. *SYS 23134*
 
Quote:
Originally Posted by pavanmaverick (Post 1943538)
You need to install a Verizon Carrier cab for this to work properly. Out of the box, its generic, and has no carrier provisioned in to allow pretty much anyone on a CDMA network to use it. Please let me know if it doesn't work even after provisioning.
I must have had a bad flash. I tried a few hard resets, but I could never get it to fully load. It would freeze just as the today screen was loading.

I'll take anotehr swing at it later.

Doug M.

bpsamant 09-13-2010 09:02 PM
Re: *Blazing Fast & Stable* Maverick MobileShell ROM with overclocking. *SYS 23134*
 
Quote:
Originally Posted by Serofred (Post 1943247)
so far it looks good, however............ I cant get my internet to work. I am on sprint. Any help?
Quote:
Originally Posted by pavanmaverick (Post 1943259)
Did you try installing a Sprint specific carrier cab? I would recommed dcd's Sprint carrier cab. Or you can try any of the other Sprint cabs floating around in these forums.
Quote:
Originally Posted by Serofred (Post 1943309)
It worked! Thanks! You da man!
@ pavanmaverick:

Thanks for the effort.Will have a test drive. Downloading now.


@ pavanmaverick & Serofred

Can u post a link to this SPRINT carrier cab. I did a search I came up things from 2008 and for mogul phone.

Thanks in advance.

Israel 09-13-2010 09:05 PM
Re: *Blazing Fast & Stable* Maverick MobileShell ROM with overclocking. *SYS 23134*
 
2 Attachment(s)
Quote:
Originally Posted by pavanmaverick (Post 1943538)
You need to install a Verizon Carrier cab for this to work properly. Out of the box, its generic, and has no carrier provisioned in to allow pretty much anyone on a CDMA network to use it. Please let me know if it doesn't work even after provisioning.
Thanks for your hard work on this ROM. Installed and looked it over, pretty fast response.
However there is a major problem with the provisioning, tried two different cabs and neither will work. I soft reset after install and went to update PRL and still no go. Phone works but internet does not.
I also tried entering ##3282# to check settings and this also does not work at all.:banghead:

I am all out of ideas. Any help would be greatly appreciated.
Running TP2 on Sprint, Thanks.

pavanmaverick 09-13-2010 09:07 PM
Re: *Blazing Fast & Stable* Maverick MobileShell ROM with overclocking. *SYS 23134*
 
Quote:
Originally Posted by bpsamant (Post 1943792)
Can u post a link to this SPRINT carrier cab. I did a search I came up things from 2008 and for mogul phone.
That one will work just fine! The carrier cabs are not device specific, as far as I know. I have used dcd's carrier cabs for the Mogul on my TP2 in the past, and its been fine.

bpsamant 09-13-2010 09:10 PM
Re: *Blazing Fast & Stable* Maverick MobileShell ROM with overclocking. *SYS 23134*
 
Quote:
Originally Posted by pavanmaverick (Post 1943799)
That one will work just fine! The carrier cabs are not device specific, as far as I know. I have used dcd's carrier cabs for the Mogul on my TP2 in the past, and its been fine.
Wow

What exactly do these carrier cabs do, if they are still vaild from 2 years ago, and from a different phone altogether.


Quote:
Originally Posted by Israel (Post 1943798)
Thanks for your hard work on this ROM. Installed and looked it over, pretty fast response.
However there is a major problem with the provisioning, tried two different cabs and neither will work. I soft reset after install and went to update PRL and still no go. Phone works but internet does not.
I also tried entering ##3282# to check settings and this also does not work at all.:banghead:

I am all out of ideas. Any help would be greatly appreciated.
Running TP2 on Sprint, Thanks.

It appears that it might be helpful to others as well for some guidance/links to carrir cabs, (at least SPRINT & Verizon)

pavanmaverick 09-13-2010 09:11 PM
Re: *Blazing Fast & Stable* Maverick MobileShell ROM with overclocking. *SYS 23134*
 
Quote:
Originally Posted by Israel (Post 1943798)
Thanks for your hard work on this ROM. Installed and looked it over, pretty fast response.
However there is a major problem with the provisioning, tried two different cabs and neither will work. I soft reset after install and went to update PRL and still no go. Phone works but internet does not.
I also tried entering ##3282# to check settings and this also does not work at all.:banghead:

I am all out of ideas. Any help would be greatly appreciated.
Running TP2 on Sprint, Thanks.
I am on Sprint, so its pretty hard for me to troubleshoot VZ phones:oops:

That being said, I am totally unsure what the problem could be. If there are any other VZ users on this ROM, perhaps they can chime in?

Did you try a Task29 before loading this ROM? I know that's kind of a cop-out answer, but very often, Task29-ing fixes unexplainable weirdnesses. :dontknow:

On a side note, just tried it, and the ##3282# is working fine on my phone.

pavanmaverick 09-13-2010 09:14 PM
Re: *Blazing Fast & Stable* Maverick MobileShell ROM with overclocking. *SYS 23134*
 
Quote:
Originally Posted by bpsamant (Post 1943800)
What exactly do these carrier cabs do, if they are still vaild from 2 years ago, and from a different phone altogether.
As far as I know, these cabs set up the carrier specific connection settings - which, as the name implies are carrier specific and not phone model specific.

I have never been on VZ, so cannot tell you much about it. But for Sprint, go ahead and try the dcd Carrier cab.
Various dcd Carrier cabs: Here


All times are GMT -4. The time now is 02:28 PM.
Page 3 of 31 12 3 4513 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0