{ROM}{21667|23557/63}{8/4}Formula's SPB MobileSense 3.5.5{Loaded/Baseline}Layout Swap

[Zaphod-Beeblebrox]

It's exchange 2007. Yes, I am an admin. Although I try not to touch it too much. It's not my area of expertise. I can fumble around most things, but I leave the nitty gritty to a good friend who is certified in everything under the sun.
Speaking of carrier provision, I'm not sure if this was the case before provisioning, but it doesn't set up the network credentials right (it leaves them blank actually), so I had to go in and manually enter the login and password for vzw3g.net.
Unless provisioning does something besides MMS, I likely don't need it either. I almost never do MMS anyway.
I don't think this is a 235XX issue, as the last Calkulin Build you did was a 235XX and it ran great.
I will re-flash in a bit and NOT do carrier provisioning and see if that changes anything.
What about OTA programming, I typically do the *228 thing with VZW to make sure I have the latest PRL, etc. Any reason not to do that?
To give you an idea of what kind of problem this is: I can be at the home screen with 75M free. I press the green send button to bring up my dialer, and I can count 6 seconds out before it displays the dialer. Once the dialer is up, I can make a call OK.
Swiping between MS screens and pulling up the start menu, etc can vary anywhere from quickly to a second or more between action/response.
All the while, active sync is pretty much locked up and not delivering e-mail.

[Cajun Reefer]

Originally Posted by Zaphod-Beeblebrox

It's exchange 2007. Yes, I am an admin. Although I try not to touch it too much. It's not my area of expertise. I can fumble around most things, but I leave the nitty gritty to a good friend who is certified in everything under the sun.
Speaking of carrier provision, I'm not sure if this was the case before provisioning, but it doesn't set up the network credentials right (it leaves them blank actually), so I had to go in and manually enter the login and password for vzw3g.net.
Unless provisioning does something besides MMS, I likely don't need it either. I almost never do MMS anyway.
I don't think this is a 235XX issue, as the last Calkulin Build you did was a 235XX and it ran great.
I will re-flash in a bit and NOT do carrier provisioning and see if that changes anything.
What about OTA programming, I typically do the *228 thing with VZW to make sure I have the latest PRL, etc. Any reason not to do that?
To give you an idea of what kind of problem this is: I can be at the home screen with 75M free. I press the green send button to bring up my dialer, and I can count 6 seconds out before it displays the dialer. Once the dialer is up, I can make a call OK.
Swiping between MS screens and pulling up the start menu, etc can vary anywhere from quickly to a second or more between action/response.
All the while, active sync is pretty much locked up and not delivering e-mail.

Zaphod-Beeblebrox,

Have you had any luck getting the loaded ROM to work on your Verizon TP2? I loaded it; however, my phone bogs down bad within a few minutes and no visible apps running. And I just have a basic bellsouth e-mail with very few e-mails attached to mine. It looks like the Sprint guys are rolling just fine. I love the look and the options, but as you mentioned before, I feel like I'm running my old Mogul! Any suggestions for a Verizon guy would be greatly appreciated?

-Dennis


NOTE: Disregard, I just realized I loaded 23563, not 23569. I will try that one and report back.

[Zaphod-Beeblebrox]

Originally Posted by Cajun Reefer

Zaphod-Beeblebrox,

Have you had any luck getting the loaded ROM to work on your Verizon TP2? I loaded it; however, my phone bogs down bad within a few minutes and no visible apps running. And I just have a basic bellsouth e-mail with very few e-mails attached to mine. It looks like the Sprint guys are rolling just fine. I love the look and the options, but as you mentioned before, I feel like I'm running my old Mogul! Any suggestions for a Verizon guy would be greatly appreciated?

-Dennis


NOTE: Disregard, I just realized I loaded 23563, not 23569. I will try that one and report back.

I don't think this is a SYS problem. I don't think there is much difference from 23563 to 23569 on the OS side (I think Formula made a LOT of tweaks and cosmetic changes this time around though).
As mentioned, for me the problems started when we switched from the Calkulin based kitchen to the RaidZero Kitchen. Formula said he got about an extra 10 MB with this switch, which is important. I think, however, that RZ must have some tweaks in there that don't play well with Verizon.
Are there any other VZW users in here using the ROM? How is it going for you?

[Formula84]

Originally Posted by Zaphod-Beeblebrox

I don't think this is a SYS problem. I don't think there is much difference from 23563 to 23569 on the OS side (I think Formula made a LOT of tweaks and cosmetic changes this time around though).
As mentioned, for me the problems started when we switched from the Calkulin based kitchen to the RaidZero Kitchen. Formula said he got about an extra 10 MB with this switch, which is important. I think, however, that RZ must have some tweaks in there that don't play well with Verizon.
Are there any other VZW users in here using the ROM? How is it going for you?

turns out the increased ram is more or less due to the fact that Raid's kitchen is using platform rebuilder rather than visual kitchen. I have been discussing this in the chefs corner group kitchen thread. I have disected all of raids tweaks and pretty much at this point am just using his script to compile using PRB and all of my own everything else. I am still using some of his cool thing like his titanium CPRs and his baseline carrier select and generic carrier base.

Maybe it has to do with this I can try using my old calc based carrier things and see if it makes a difference to you verizon users, can probably have something out for testing by tommorrow....