[UNLOCKED-RADIOS] - - 2.32.00WU/2.23.00WU/1.96.10WU Radio Unlocked for US Networks

[leoiden]

Originally Posted by Olipro

OK, I made a WU radio based on 2.23.00 Verizon - it will allow you to use your device on US networks yadda yadda.

DOWNLOAD HERE


as usual, YOU MUST BE SECURITY UNLOCKED IF YOU ARE NOT SECURITY UNLOCKED YOU WILL GET STUCK IN BOOTLOADER

This also implements a different method to the previous radios, so this will connect to your network on Automatic. According to testers it is flawless.

youre the best olipro we are not worthy
thanks for sharing bro

[Dr.8820]

just to be clear, those of us using the 1.96.00WU without any problems, shouldn't have to flash the new radio, correct?

[mikee4fun]

Originally Posted by Dr.8820

just to be clear, those of us using the 1.96.00WU without any problems, shouldn't have to flash the new radio, correct?

Dr, if you are also using a US GSM carrier flash to the new radio. When you swap to GSM mode you no longer have to go to manual, just switch to GSM and bam, your dialed in.

On another note, can anyone write a mortscript to swap between cdma and gsm? I would but have not dealt with mortscript to pull it off. I know there is a 1x app so I am sure this can be done. =)

[Dr.8820]

thanks mike, i never had any problems before, that's why i tried walking those who did thru what i did. i'm going to leave mine at 1.96, but if i have the problems that others had, i'll switch. but thanks again! and thanks olipro!

[mikee4fun]

Originally Posted by Dr.8820

thanks mike, i never had any problems before, that's why i tried walking those who did thru what i did. i'm going to leave mine at 1.96, but if i have the problems that others had, i'll switch. but thanks again! and thanks olipro!

Ah, you don't have to go into manual mode to get a GSM carrier lock on the 1.96WU radio? If so, mind telling me what hardware rev you have on your TP2?

[Dr.8820]

yes, i have to go manual, but after spending 10 hours messing with all the settings, mine works on manual. on auto, i get no service at all. but mine is all set for manual, so like olipro said, it's not broke, so i'll leave it alone. if i switch my sim from t-mobile to at&t, i'll switch then. but i'm happy that olipro addressed this issue .

[mikee4fun]

Originally Posted by Dr.8820

yes, i have to go manual, but after spending 10 hours messing with all the settings, mine works on manual. on auto, i get no service at all. but mine is all set for manual, so like olipro said, it's not broke, so i'll leave it alone. if i switch my sim from t-mobile to at&t, i'll switch then. but i'm happy that olipro addressed this issue .

Yeah, well I was in the same boat I would get nothing if set to auto before, but now with the new radio I do not have to do that. =)

[Olipro]

Originally Posted by Dr.8820

just to be clear, those of us using the 1.96.00WU without any problems, shouldn't have to flash the new radio, correct?

if it ain't broke, don't fix it... but that said, it's unlikely to hurt.

[SouthernAtHeart]

YES! IT SEEMS TO BE WORKING!

Olipro just made a lot of folks happy today!

[abhijeetpal]

What will happen if I flash it on a security unlocked tp2 .. you say it will get stuck in the boot loader..why does that happen? why is security unlocking so necessary...
will i be able to return to the stock rom after that???