PPCGeeks
Page 21 of 29 « First 111920 21 2223 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   CDMA TP Development (http://forum.ppcgeeks.com/forumdisplay.php?f=68)
-   -   How To unlock and flash with Video Walk Through! (http://forum.ppcgeeks.com/showthread.php?t=69854)

razorloves 11-03-2009 04:38 PM
Re: How To unlock and flash with Video Walk Through!
 
Quote:
Originally Posted by tfoster (Post 1294429)
does the .net framework get installed on the phone or just on the computer?
see preparations, Step 1 here http://forum.ppcgeeks.com/showthread.php?t=42503

jobryan26 11-04-2009 09:28 PM
Re: How To unlock and flash with Video Walk Through!
 
Hey guys I need some help. I had to take my TP in to get it replaced under warranty. I just went to unlock the replacement and I ran Raphael_CDMA_HSPL_037.zip phone rebooted to tri screen, went straight to "loading...", and then my computer lost connection to the phone. Now my phone goes right thru the tri-color screen and then displays "loading...." and will not go any further. Which was the same place it lost connection. I have tried hard resetting, and entering bootloader via vol- power & reset button. I really need you help please.

razorloves 11-04-2009 10:19 PM
Re: How To unlock and flash with Video Walk Through!
 
Quote:
Originally Posted by jobryan26 (Post 1299206)
Hey guys I need some help. I had to take my TP in to get it replaced under warranty. I just went to unlock the replacement and I ran Raphael_CDMA_HSPL_037.zip phone rebooted to tri screen, went straight to "loading...", and then my computer lost connection to the phone. Now my phone goes right thru the tri-color screen and then displays "loading...." and will not go any further. Which was the same place it lost connection. I have tried hard resetting, and entering bootloader via vol- power & reset button. I really need you help please.
sounds like you have an nbh file on your mem card. either move it from the root or delete it or remove mem card. then you'll be able to unlock.

jobryan26 11-05-2009 12:09 AM
Re: How To unlock and flash with Video Walk Through!
 
Quote:
Originally Posted by razorloves (Post 1299363)
sounds like you have an nbh file on your mem card. either move it from the root or delete it or remove mem card. then you'll be able to unlock.
Yep that was it. I had forgotten to delete the file from when I had to relock my previous phone. Thank you so much!!!

fishdood12 11-09-2009 08:38 PM
Re: How To unlock and flash with Video Walk Through!
 
Ok I loaded the .37 and unlocked my phone. Its a new replacment from Sprint. Going to Bootloaded screen it shows up at .37 and security unlocked.

When I try to load any custom rom it seems to be working and goes to tricolor screen but then when the status bar comes up it just stays at 0% and then times out.

I have flashed many times before on other phones and never had this problem. I can flash the stock HTC rom from their site no problem. Any suggestions?

razorloves 11-10-2009 02:26 AM
Re: How To unlock and flash with Video Walk Through!
 
Quote:
Originally Posted by fishdood12 (Post 1313723)
Ok I loaded the .37 and unlocked my phone. Its a new replacment from Sprint. Going to Bootloaded screen it shows up at .37 and security unlocked.

When I try to load any custom rom it seems to be working and goes to tricolor screen but then when the status bar comes up it just stays at 0% and then times out.

I have flashed many times before on other phones and never had this problem. I can flash the stock HTC rom from their site no problem. Any suggestions?
what spl version is showing on the bootloader screen?
.37.cmonex or .37.0000

geostone 11-10-2009 08:35 PM
Re: How To unlock and flash with Video Walk Through!
 
Thanks for posting this. I am new to all of this and was terrified at the thought of bricking a 600 dollar phone. Instructions were clear and got me through it.

chrialex 11-11-2009 02:30 PM
Re: How To unlock and flash with Video Walk Through!
 
Quote:
Originally Posted by geostone (Post 1317310)
Thanks for posting this. I am new to all of this and was terrified at the thought of bricking a 600 dollar phone. Instructions were clear and got me through it.
If your carrier offers insurance on a phone and they replace it for accidentally running it over or dropping it in the sink, why wouldn't they replace it for being bricked? Hmm, might have to call mine and ask ;-)

bullhead00 11-16-2009 09:45 PM
Re: How To unlock and flash with Video Walk Through!
 
Quote:
Originally Posted by razorloves (Post 1314943)
what spl version is showing on the bootloader screen?
.37.cmonex or .37.0000
What if it is showing .37.0000 but at the top it tells you security unlocked and I'm already running Juicy 8. I'm trying to flash back to my stock ROM so I can do a warranty claim and it won't let me. I've already flashed several different ROMs to this phone and for some reason I'm stuck on Juicy.

Will they really care if I send the phone in with a custom ROM on it? What can I do?

razorloves 11-17-2009 01:10 AM
Re: How To unlock and flash with Video Walk Through!
 
Quote:
Originally Posted by bullhead00 (Post 1335418)
What if it is showing .37.0000 but at the top it tells you security unlocked and I'm already running Juicy 8. I'm trying to flash back to my stock ROM so I can do a warranty claim and it won't let me. I've already flashed several different ROMs to this phone and for some reason I'm stuck on Juicy.

Will they really care if I send the phone in with a custom ROM on it? What can I do?
which stock rom are you trying to flash? You have to flash the SHIPPED one because you're locked.

Warranty can be denied if they see that you have custom spl or custom rom because they are not official.


All times are GMT -4. The time now is 04:31 PM.
Page 21 of 29 « First 111920 21 2223 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2026, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0