H|July 4|.¸¸.·´¯`·.¸¸. Energy .¸¸.·´¯ 6.5|21916 / 6.5.X|29022 * Sense 2019

[joeblow789]

Originally Posted by joeblow789

OK, I'm pulling my hair out over this one. Although I've got my Reminders under Sounds & Notifications set to Repeat & Flash Light for No Limit, they only repeat for a limited time & the LEDs only flash for 2 minutes or so. Does anybody else see this? Is there a solution? Honestly, the most important to me is to have the dpad LEDs flash until I snooze or dismiss the reminder. Currently I'm running Energy.HERMAN.21911.Sense2.5.Cookie.Jul.27, but noticed the same behavior on 23xxx as well.

Hey you, yes you, the one reading this right now. Please do a fellow geeker a favor & test this. Make sure your Sounds & Notifications are set to flash the Reminders LED for "no limit", set a reminder in the Calendar & post back on how long your dpad LED flashes for when the reminder is triggered. Much obliged, thanks.

BTW, I've been using ReRemind as an audio reminder workaround, but there's no reason why the LED shouldn't work properly. I know it works fine for GSM devices.

[yuxz999]

Please help!

I tried to flashed my TP using the Energy.HERMAN.21911.Sense2.5.Cookie.Jul.27.7z and can not let it work since there is not enough memory. Please help me how to solve the problem.

[joeblow789]

Originally Posted by yuxz999

...I tried to flashed my TP using the Energy.HERMAN.21911.Sense2.5.Cookie.Jul.27.7z and can not let it work since there is not enough memory. Please help me how to solve the problem.

If you're using a Verizon branded Touch Pro, they have less memory & that is your problem. Search the thread for Verizon to find ideas on what might work, like changing the page pool. Maybe try one of the Titanium releases. If you can't get it to work, you'll have to find a different ROM with less "stuff" baked in.

[mydiy]

Energy.HERMAN.23673.Sense2.5.Cookie.Jul.27 had a 10-day trial, found that memory cards are sometimes lost after reboot, WI-Fi Internet does not work, but then again restart Well, I do not know whether other aircraft Friends encountered this problem?

[joeblow789]

Originally Posted by mydiy

Energy.HERMAN.23673.Sense2.5.Cookie.Jul.27 had a 10-day trial, found that memory cards are sometimes lost after reboot, WI-Fi Internet does not work, but then again restart Well, I do not know whether other aircraft Friends encountered this problem?

I think using Task 29 before flashing a ROM will solve your problems.
http://forum.ppcgeeks.com/showthread.php?t=121736

[sa_doug]

Originally Posted by joeblow789

Hey you, yes you, the one reading this right now. Please do a fellow geeker a favor & test this. Make sure your Sounds & Notifications are set to flash the Reminders LED for "no limit", set a reminder in the Calendar & post back on how long your dpad LED flashes for when the reminder is triggered. Much obliged, thanks.

BTW, I've been using ReRemind as an audio reminder workaround, but there's no reason why the LED shouldn't work properly. I know it works fine for GSM devices.

Hey JoeBlow, perfect timing, I just got an email as I read your post so I made sure to watch. I'm running the same rom as you and I have the problem. I also tried changing the flash time to 45 minutes but it still only flashes for about 2 minutes. I havn't looked into the problem any farther though.

[m4f1050]

Originally Posted by manuva

Hi,

Please help!!!

I was replacing the battery, and now my phone is stuck in the rainbow colored screen --- the same same screen you get when you do a hard reset to load the ROM from the memory card.

Now, my phone always goes to that screen and is stuck there. It says "Serial" at the bottom. I can connect it to the computer and it says "USB" instead of "Serial" and it allows me to load the ROM from PC. Nothing beyond that....

Thanks
Manu

Try using mtty and type "boot" to see if it boots. If it does, use the SSPL and reflash the HSPL on the phone. This happened to me once. Oh, and make sure you install .NET CF 3.5

[joeblow789]

Originally Posted by sa_doug

Hey JoeBlow, perfect timing, I just got an email as I read your post so I made sure to watch. I'm running the same rom as you and I have the problem. I also tried changing the flash time to 45 minutes but it still only flashes for about 2 minutes. I havn't looked into the problem any farther though.

Thanks, good to know I'm not crazy. Interestingly, my text message LED notification flashes for 30 minutes & I read somewhere else about that quirk.

I vaguely recall reading something about older OS builds working fine with regard to the LEDs. I hate to say it, but when I get a chance, I may try some of the older abandoned TP ROMs just to see how they behave. I also bet there's a solution by using nueLED, but it's currently over my head & I probably won't have time to try messing with it for several months. I'll be sure to post any progress I make, but if somebody else here is smart enough to tinker with nueLED, let us know what you find.

[joeblow789]

Originally Posted by manuva

...I was replacing the battery, and now my phone is stuck in the rainbow colored screen --- the same same screen you get when you do a hard reset to load the ROM from the memory card...

Ah, I see you updated that you're using a Sprint TP on Pageplus (Verizon). I'm not smart enough to know, but if m4f1050's advice doesn't help, I wonder if it could be related to any Sprint to Verizon hacks?

[rune-san]

Just flashed with the new GTX and I have to say I love it. Now that the calendar text is fixed its fully usable for me. Great work as always NRG! The only thing I wish now was that there was an Alltel carrier provision. I always have to go about uninstalling the Arcsoft program and installing the carrier cab and then an old old version of the Arcsoft cab which seems to not play terribly nice with the ROM. The problem is that I've tried all sorts of settings to get MMS working properly through the default implementation without any success. MMS's always fail to send and I can never receive any. As soon as I uninstall the Arcsoft software, run the carrier cab, and install the old version of Arcsoft, everything works just fine. But the lines dont fit that well and the implementation is a little buggy. If I could get an Alltel carrier provision, I think I'd finally be able to call a ROM "perfect"