Copper v.0.0.0.1 [6.5.21500 Build 21500] [16MBPP] [UC Compatible]

[bjhill2112]

Originally Posted by lilgrass71

i found a problem!

I'm using slide2answer and when the phone is locked, it look slike the phone is getting the call but its confused of weather to WM6.5 phone skin or the S2A skin so it just sit there flashing until about the 4th or 5 ring until it actually displays S2A. you can see that the phone is trying to get a call because allt he lights light up and flash and there s phone icon on top it just doesnt ring or displays the caller until a while later.

anyone else getting this?

That is an issue in all 6.5 ROMs. So far all of the old phone skins just don't play nice. Give it time, someone will eventually figure out how to properly skin the dialer for 6.5 - until then, I'll just use the WM lock screen with the default dialer (even though it's not very pretty!)

[1999TL]

Originally Posted by jbearamus

my media player and titanium both see the storage card just fine. have you done the basics? soft reset, remove and insert card, and check the media player's menu to make sure it's checking the storage card library not the main memory?
i know those sound remedial but that's usually the three things that fix it for me

I've done the basics. It will read my 1 gb storage card fine. However, it will not show my 8 gb storage card, even though file explorer sees it. I can't be the only one. Anybody else?

[1999TL]

The weird thing is, when I pull out my storage card and reinsert it with WMP open, it will see that a storage card is inserted. however, I can't highlight it from the library. I only see my device, not storage card...

[jdignazio]

Originally Posted by caseyatbt

I have tried to flash 4 times each time it gets stuck at 43% and gives me an error code of 262. I have been able to flash it back to another ROM but this one is unsuccessful.

1. ERROR [202, 204] : CONNECTION

This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync before running RUU.

1. ERROR [206] : MEMORY ALLOCATION
2. ERROR [280] : UPDATE ERROR

When you see any of these error messages, close other running programs on the computer and run RUU again.

1. ERROR [208] : FILE OPEN
2. ERROR [210] : FILE READ

These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.

1. ERROR [212] : FILE CREATE
2. ERROR [214] : FILE WRITE
3. ERROR [222, 224] : DEVICE NOT RESPONDING

These error messages will appear when remote access control has failed. Check the ActiveSync connection and try running RUU again.

1. ERROR [220] : MAIN BATTERY POWER

This error message will appear when the device's battery power is not sufficient. Although RUU will instruct you to plug in the AC adapter, it still has to make sure that your device has enough power to upgrade the radio. (Even when you plug in the AC adapter, the device is unable to charge the battery when it is upgrading the radio).

1. ERROR [238] : FILE READ

This error message may appear when, for some unknown reason, the ROM image on the phone is corrupt. Download the whole RUU and try again.

1. ERROR [240] : FILE OPEN

When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.

1. ERROR [242] : INVALID LANGUAGE
2. ERROR [244] : INVALID MODEL ID
3. ERROR [294] : INVALID VENDER ID
4. ERROR [296] : UPGRADE ONLY

One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.

1. ERROR [246] : DEVICE NOT RESPONDING

This error message indicates that RUU cannot start the update process. Please contact your service provider for assistance.

1. ERROR [248~260] : UPDATE ERROR

This error occurs when there is an ";open port error"; before upgrading the CE ROM image.

Solution: You can reset the device and run RUU again. If you still encounter an ";OPEN PORT ERROR"; again, reset your computer and try again.

1. ERROR [262] : UPDATE ERROR

This error occurs during the CE ROM code upgrade process.

Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.

Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.

1. ERROR [264, 274] : CONNECTION
2. ERROR [302~318] : UPDATE ERROR
3. ERROR [320~328] : INVALID COMMAND

These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.

1. ERROR [300] : INVALID UPDATE TOOL

This error message will appear when you use the incorrect RUU version to upgrade.

1. ERROR [330] : ROM IMAGE ERROR

This error message will appear when you use the incorrect RUU to upgrade and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version to upgrade.

Hope that helps!!!

[MogulDon]

Originally Posted by lilgrass71

i found a problem!

I'm using slide2answer and when the phone is locked, it look slike the phone is getting the call but its confused of weather to WM6.5 phone skin or the S2A skin so it just sit there flashing until about the 4th or 5 ring until it actually displays S2A. you can see that the phone is trying to get a call because allt he lights light up and flash and there s phone icon on top it just doesnt ring or displays the caller until a while later.

anyone else getting this?

well I'm having the same problem... I installed S2U2 and use the slide to answer feature so far its working fine... that will hold me until a fix comes out.

[MogulDon]

Originally Posted by jdignazio

1. ERROR [202, 204] : CONNECTION

This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync before running RUU.

1. ERROR [206] : MEMORY ALLOCATION
2. ERROR [280] : UPDATE ERROR

When you see any of these error messages, close other running programs on the computer and run RUU again.

1. ERROR [208] : FILE OPEN
2. ERROR [210] : FILE READ

These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.

1. ERROR [212] : FILE CREATE
2. ERROR [214] : FILE WRITE
3. ERROR [222, 224] : DEVICE NOT RESPONDING

These error messages will appear when remote access control has failed. Check the ActiveSync connection and try running RUU again.

1. ERROR [220] : MAIN BATTERY POWER

This error message will appear when the device's battery power is not sufficient. Although RUU will instruct you to plug in the AC adapter, it still has to make sure that your device has enough power to upgrade the radio. (Even when you plug in the AC adapter, the device is unable to charge the battery when it is upgrading the radio).

1. ERROR [238] : FILE READ

This error message may appear when, for some unknown reason, the ROM image on the phone is corrupt. Download the whole RUU and try again.

1. ERROR [240] : FILE OPEN

When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.

1. ERROR [242] : INVALID LANGUAGE
2. ERROR [244] : INVALID MODEL ID
3. ERROR [294] : INVALID VENDER ID
4. ERROR [296] : UPGRADE ONLY

One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.

1. ERROR [246] : DEVICE NOT RESPONDING

This error message indicates that RUU cannot start the update process. Please contact your service provider for assistance.

1. ERROR [248~260] : UPDATE ERROR

This error occurs when there is an ";open port error"; before upgrading the CE ROM image.

Solution: You can reset the device and run RUU again. If you still encounter an ";OPEN PORT ERROR"; again, reset your computer and try again.

1. ERROR [262] : UPDATE ERROR

This error occurs during the CE ROM code upgrade process.

Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.

Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.

1. ERROR [264, 274] : CONNECTION
2. ERROR [302~318] : UPDATE ERROR
3. ERROR [320~328] : INVALID COMMAND

These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.

1. ERROR [300] : INVALID UPDATE TOOL

This error message will appear when you use the incorrect RUU version to upgrade.

1. ERROR [330] : ROM IMAGE ERROR

This error message will appear when you use the incorrect RUU to upgrade and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version to upgrade.

Hope that helps!!!

What Operating System are you using?

[sracercelica]

Originally Posted by 1999TL

I did the same. works great.

Me too, changed it to 24 first then flashed. It is as smooth as butter on a smooth baby's bottom!

[Bandits007]

will this work with sprint htc mogul....i guess aka titan?

[Hafrust]

Originally Posted by Bandits007

will this work with sprint htc mogul....i guess aka titan?

Nope.

[ItsDon]

Has anyone figured out how to get the Titanium Weather Panel to display weather for TWO cities? Is it possible?

Also, I'd like to find some sort of Speed Dial app or cab so I don't have to scroll through 129 names...