[CDMA] Nemesis WM 6.5.1 Build 23064 - 10/28/09 [ROM] - Page 5

**lllboredlll** · #41 (**permalink**) 03-14-2009, 02:16 PM

try this.....

robby37 · #42 (**permalink**) 03-14-2009, 04:44 PM

is this rom the one that has the new ie or not yet as your last kitchen is pefectly stable for me but ill flash if it has the new ie with flash

**GrandMasterB** · #43 (**permalink**) 03-14-2009, 05:22 PM

Quote:

Originally Posted by coldheat06

Thank you.

I'm also have having a problem with the custom Weather, for some reason after I pick a state I am not able to scroll through the cities..... it actually blanks out all of the cities.
.

I had the same problem but only for the state of Washington , all others seem to be fine. No biggie cause I dont even live in Washington I was just "exploring"

Quote:

Originally Posted by lllboredlll

hahahahah I'm about to go... I've worked all day getting this thing ready for you guys... hope you guys enjoy this one

lllboredlll , I LOVE what you have done with the kitchen , its just perfect IMO. 1.7 = RIGHT ON!

Couple of question though , The accelerometer seem to be lagging really bad like 4-5 seconds and sometimes not working at all. It doesnt work at all in Opera .Is this related to the Sensor SDk and whats the difference between the DiamondII and Touch Pro? I used the DiamondII.

I dont know if anybody else uses the MP3 Trimmer but I do often , so I'll have to see if I can find a cab and install it.

This one might just be device related and nothing to do with your ROM but after cooking and flashing I am getting close to 45mb free about 53% Ram usage, this is GOOD , but after a few hours it is at 84% RAM usage and this is with the "x" button set to close on tapping and no running programs open. I use clear temp and only get about 500kb back. The only way I know to get the RAM back down is to soft reset. Like I side this device is new to me so maybe this is a normal leak with the Touch Pro? Any advice?

BTW even at 84% RAM usage this ROM is STILL super peppy and quick (Great ROM) just wondering where my RAM is tied up?

Thanks for an top notch kitchen!

**kaos** · #44 (**permalink**) 03-14-2009, 05:51 PM

whats the page pool with out using the changer...I wanna hex edit it and dont trust changer...wanna physically see it as i do it.

boxer112 · #45 (**permalink**) 03-14-2009, 07:57 PM

First Thank You....

I've made 2 roms and the camera is not working.

The file Camera cannot be opened. Either it is not signed with a trusted certificate or one of it's components cannot be found. if the problem persist, try reinstalling or restoring the file.

**lllboredlll** · #46 (**permalink**) 03-14-2009, 08:07 PM

Quote:

Originally Posted by GrandMasterB

I had the same problem but only for the state of Washington , all others seem to be fine. No biggie cause I dont even live in Washington I was just "exploring"

lllboredlll , I LOVE what you have done with the kitchen , its just perfect IMO. 1.7 = RIGHT ON!

Couple of question though , The accelerometer seem to be lagging really bad like 4-5 seconds and sometimes not working at all. It doesnt work at all in Opera .Is this related to the Sensor SDk and whats the difference between the DiamondII and Touch Pro? I used the DiamondII.

I dont know if anybody else uses the MP3 Trimmer but I do often , so I'll have to see if I can find a cab and install it.

This one might just be device related and nothing to do with your ROM but after cooking and flashing I am getting close to 45mb free about 53% Ram usage, this is GOOD , but after a few hours it is at 84% RAM usage and this is with the "x" button set to close on tapping and no running programs open. I use clear temp and only get about 500kb back. The only way I know to get the RAM back down is to soft reset. Like I side this device is new to me so maybe this is a normal leak with the Touch Pro? Any advice?

BTW even at 84% RAM usage this ROM is STILL super peppy and quick (Great ROM) just wondering where my RAM is tied up?

Thanks for an top notch kitchen!

Did you include tf3d and if so what theme and engine.

I personally dont like the diamond sensor sdk. Probably will take it out of next release if some headway isnt made with it.

Glad you like the new kitchen. Sounds like it was worth my time

Quote:

Originally Posted by kaos

whats the page pool with out using the changer...I wanna hex edit it and dont trust changer...wanna physically see it as i do it.

I believe it's 10. The changer works fine by the way. I know some are sceptics of it but it's worked great for me thus far.

Quote:

Originally Posted by boxer112

First Thank You....

I've made 2 roms and the camera is not working.

The file Camera cannot be opened. Either it is not signed with a trusted certificate or one of it's components cannot be found. if the problem persist, try reinstalling or restoring the file.

I'll have to see what's up with that. My camera works so maybe the upload got screwed

that's happened a time or two on me. Hopefully it's just an isolated incident.

I'm busy with renovations this weekend so I'll check in when I can

**kaos** · #47 (**permalink**) 03-14-2009, 08:17 PM

Quote:

Originally Posted by boxer112

First Thank You....

I've made 2 roms and the camera is not working.

The file Camera cannot be opened. Either it is not signed with a trusted certificate or one of it's components cannot be found. if the problem persist, try reinstalling or restoring the file.

just tried my camera works fine for me....

rsohne · #48 (**permalink**) 03-14-2009, 08:25 PM

Great rom and very fast.No problems with weather or camera for me.

**GrandMasterB** · #49 (**permalink**) 03-14-2009, 08:44 PM

Quote:

Originally Posted by lllboredlll

Did you include tf3d and if so what theme and engine.

I personally dont like the diamond sensor sdk. Probably will take it out of next release if some headway isnt made with it.

Glad you like the new kitchen. Sounds like it was worth my time

I believe it's 10. The changer works fine by the way. I know some are sceptics of it but it's worked great for me thus far.

I'll have to see what's up with that. My camera works so maybe the upload got screwed

that's happened a time or two on me. Hopefully it's just an isolated incident.

I'm busy with renovations this weekend so I'll check in when I can

I used XboxMods HD Manila and HD engine.

PagePool is set at default 10 , 10 works well , and PagePool Changer has worked fine for me.

Tried my camera this morning and all is well with it.

lllboredlll it is not my place to put a value on your time , but I will say that this is a "Stand-Out" kitchen and I feel it will easily rise to the top , So IMO its time well spent and much appreciated!!

**lllboredlll** · #50 (**permalink**) 03-14-2009, 10:04 PM

I had the same problem with that engine and theme. Bad thing is the other theme didn't prove to be any better. I've actually went to the black theme with the regular manila engine. It leaks a little but not as bad.

Thanks for you support of my work. I'm glad you think so highly of it. If one person uses and enjoys it then it makes it worth the effort to me.