PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   CDMA TP Development (http://forum.ppcgeeks.com/forumdisplay.php?f=68)
-   -   [ ROM ] [ KITCHEN ] JUICY 8 - Build 090922H (23052.5.3.0) [UC] (http://forum.ppcgeeks.com/showthread.php?t=58002)

K3v2freshh 05-21-2009 05:21 PM

Re: [ROM] [May 12] JUICY 7 - Build 090512H (21222.5.0.1) [UC] *Rhodium Manila*
 
Quote:

Originally Posted by Lat (Post 928157)
Am I the only one itching for the new update? I guess Juicy's waiting for the RTM build.

naaaah you are not da only 1 lol

mlin 05-21-2009 06:47 PM

Re: [ROM] [May 12] JUICY 7 - Build 090512H (21222.5.0.1) [UC] *Rhodium Manila*
 
Quote:

Originally Posted by cmantis (Post 927198)
So I have been having considerable problems with the latest build. To the point where my phone is more or less unusable. Would it be advisable to reflash a stock Sprint rom first before upgrading, when the next build comes out?

(If so where could I find a stock rom?)

Thanks in advance.

It is highly advised to flash a stock ROM before a custom build. I use to think this was rubbish, but I noticed more bugs and errors when not flashing stock first. Here is how I go about flashing and I have experienced no "bugs" with the ROM outside of the normal Rhodium Manila issues already mentioned.

1. Enter Bootloader
2. Flash Stock
-let customizations run
3. Enter Bootloader
4. Flash Custom
-let customizations run
5. Hard reset
-let customizations run

here is the link to stock ROMs

http://forum.ppcgeeks.com/showthread.php?t=42741

its in the sticky of CDMA touch pro upgrades

mlin 05-21-2009 06:48 PM

Re: [ROM] [May 12] JUICY 7 - Build 090512H (21222.5.0.1) [UC] *Rhodium Manila*
 
Quote:

Originally Posted by Lat (Post 928157)
Am I the only one itching for the new update? I guess Juicy's waiting for the RTM build.

The RTM build should have the new dialer correct? And BTW, I'm itching a little too

ShadowDrake 05-21-2009 08:17 PM

Re: [ROM] [May 12] JUICY 7 - Build 090512H (21222.5.0.1) [UC] *Rhodium Manila*
 
Quote:

Originally Posted by mlin (Post 928350)
The RTM build should have the new dialer correct? And BTW, I'm itching a little too

Might want to get that checked out, it sounds unrelated to wanting a new ROM :mrgreen:

I could really stand to see a new update, I'm yet to make it through a single day on the past two versions without soft resetting the phone more than 5-6 times due to lockups. It would be nice if it just ran :(

Inimical 05-21-2009 08:33 PM

Re: [ROM] [May 12] JUICY 7 - Build 090512H (21222.5.0.1) [UC] *Rhodium Manila*
 
No doubt...that change log has been up for months it seems, wtf? lol

esqueue 05-21-2009 08:49 PM

Re: [ROM] [May 12] JUICY 7 - Build 090512H (21222.5.0.1) [UC] *Rhodium Manila*
 
Quote:

Originally Posted by ShadowDrake (Post 928476)
Might want to get that checked out, it sounds unrelated to wanting a new ROM :mrgreen:


LOL

By the way, do anyone have a clue on what's needed to have the new flash version that is posted in the upgrade long to have flash working? I downloaded 16453 but can't get flash to work.

tx_jaycee 05-21-2009 08:53 PM

Re: [ROM] [May 12] JUICY 7 - Build 090512H (21222.5.0.1) [UC] *Rhodium Manila*
 
Quote:

Originally Posted by mlin (Post 928349)
It is highly advised to flash a stock ROM before a custom build. I use to think this was rubbish, but I noticed more bugs and errors when not flashing stock first. Here is how I go about flashing and I have experienced no "bugs" with the ROM outside of the normal Rhodium Manila issues already mentioned.

1. Enter Bootloader
2. Flash Stock
-let customizations run
3. Enter Bootloader
4. Flash Custom
-let customizations run
5. Hard reset
-let customizations run

here is the link to stock ROMs

http://forum.ppcgeeks.com/showthread.php?t=42741

its in the sticky of CDMA touch pro upgrades

Any suggestions on a 244 Error Invalid Model ID when trying to flash from stock?

lafester 05-21-2009 10:29 PM

Re: [ROM] [May 12] JUICY 7 - Build 090512H (21222.5.0.1) [UC] *Rhodium Manila*
 
This IS crazy. lol.

overkill imho... a hard reset is all that is needed.

Quote:

Originally Posted by mlin (Post 928349)
It is highly advised to flash a stock ROM before a custom build. I use to think this was rubbish, but I noticed more bugs and errors when not flashing stock first. Here is how I go about flashing and I have experienced no "bugs" with the ROM outside of the normal Rhodium Manila issues already mentioned.

1. Enter Bootloader
2. Flash Stock
-let customizations run
3. Enter Bootloader
4. Flash Custom
-let customizations run
5. Hard reset
-let customizations run

here is the link to stock ROMs

http://forum.ppcgeeks.com/showthread.php?t=42741

its in the sticky of CDMA touch pro upgrades


lafester 05-21-2009 10:30 PM

Re: [ROM] [May 12] JUICY 7 - Build 090512H (21222.5.0.1) [UC] *Rhodium Manila*
 
Quote:

Originally Posted by tx_jaycee (Post 928549)
Any suggestions on a 244 Error Invalid Model ID when trying to flash from stock?

the only reason you would get this is if your phone is still locked.

mlin 05-21-2009 10:39 PM

Re: [ROM] [May 12] JUICY 7 - Build 090512H (21222.5.0.1) [UC] *Rhodium Manila*
 
Quote:

Originally Posted by lafester (Post 928699)
This IS crazy. lol.

overkill imho... a hard reset is all that is needed.

I use to think the same thing. However, I noticed that after flashing a certain ROM (left un-named), weird bugs kept surfacing upon subsequent flashes until I flashed back to stock and proceeded with the steps mentioned above. One of the bugs in particular that I could not get rid of until doing this was the random partial hard-resets the device would do on its own. Since implementing this series of steps. It hasn't happened again. Overkill? Maybe. Do I still have to deal with annoying flashing related bugs and issues? NOPE!


All times are GMT -4. The time now is 08:15 AM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0