[8-3-09] eRice New Style TP Kitchen [Build 23016.5.3.0] - Page 67

Isriam · #1 (**permalink**) 05-31-2009, 02:16 AM

lol, erice the oem's for my carrier work fine in bepe kitchen, and in ppckitchen.org however calkulin and erice kitchen it WILL NOT BOOT. it goes to the touch pro screen and locks up. no matter what i do, even editing the telus carrier it does this. i know it is an issue in your kitchen and when your kitchen first released people were complaining of this. it seems to be something with the carrier oem's.

i can post a provxml that will work, but without your kitchen booting i don't know what to do. i've resorted back to bepe kitchen until these new kitchens figure out why their carrier oem's cause the device not to boot.

louisk · #2 (**permalink**) 06-15-2009, 08:15 PM

I just ran this kitchen (the 2.0 one) and as always selected the things I wanted and didn't want, then went through, had it build, and then flash. However, after the flash, the system reboots, and just sits at the "Touch Pro" splash screen with the red ROM info at the bottom and never seems to move on. I tried to reboot once to see if it would recover, but still just sitting there. Anyone have suggestions or should I try to reflash?

captblaze · #3 (**permalink**) 06-16-2009, 09:12 AM

Quote:

Originally Posted by louisk

I just ran this kitchen (the 2.0 one) and as always selected the things I wanted and didn't want, then went through, had it build, and then flash. However, after the flash, the system reboots, and just sits at the "Touch Pro" splash screen with the red ROM info at the bottom and never seems to move on. I tried to reboot once to see if it would recover, but still just sitting there. Anyone have suggestions or should I try to reflash?

i've had the same thing happen to me, but i removed the OEM folder and replaced it with one from another kitchen and i was able to build and install a new ROM

mike760534211 · #4 (**permalink**) 07-04-2009, 01:24 AM

im not able to get my gps to locate any satellites. it stays on searching no matter if i use the sprint telenav or google maps.

mikel5512 · #5 (**permalink**) 07-12-2009, 07:29 PM

When I try to install pocket express it says I do not have a supported device. Also when I go to Internet Explorer and it opens Sprint's site. It says the phone is a Samsung Ace II. Is there a way to change this so it knows my phone is a Touch Pro

mikel5512 · #6 (**permalink**) 07-13-2009, 02:10 PM

Ok, I have the Touch Pro from Sprint. When I downloaded Opera 9.5 Beta and when I go to http://powerdeck.sprint.com it says "My Sprint Unknown Unkown PPC". So there must be something in IE that make it think it is a Samsung Ace II. I was also able to install Pocket Express from Opera.

some of this may already have been said

On the home screen when you go to Getting Started. None of the links within work such as Add/Remove. If I go to TouchFlo 3d View, the internet does not work and View All Settings takes you to setting up Settings > connections > Connections.

In the Windows Default view, the pictures will not let me default to an album on the SD card and the Album covers from music do not show from the SD card only from the phone. The album covers do show in Windows Media player.

The QuickGPS does not work nor can I download gps maps for Tomtom.
QuickGPS says "The file 'QuickGPS' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."

Last, is there a change the order of icons and remove apps that will not be used such as pocket IRC?

**electronicrice** · #7 (**permalink**) 07-13-2009, 09:23 PM

Quote:

Originally Posted by mikel5512

Ok, I have the Touch Pro from Sprint. When I downloaded Opera 9.5 Beta and when I go to http://powerdeck.sprint.com it says "My Sprint Unknown Unkown PPC". So there must be something in IE that make it think it is a Samsung Ace II. I was also able to install Pocket Express from Opera.

some of this may already have been said

On the home screen when you go to Getting Started. None of the links within work such as Add/Remove. If I go to TouchFlo 3d View, the internet does not work and View All Settings takes you to setting up Settings > connections > Connections.

In the Windows Default view, the pictures will not let me default to an album on the SD card and the Album covers from music do not show from the SD card only from the phone. The album covers do show in Windows Media player.

The QuickGPS does not work nor can I download gps maps for Tomtom.
QuickGPS says "The file 'QuickGPS' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."

Last, is there a change the order of icons and remove apps that will not be used such as pocket IRC?

Opera Phone Name - these SYS files that control the hardware name in IE and Opera were taken from GSM devices and most are not native to the TP. This can potentially be rectified by replacing the Browse/browsing files in SYS with older known correct copies, but will inevitably reduce functionality.

Getting Started - pretty sure this is a NetCF problem. I think I read somewhere that it requires a particular version of it, maybe 2.0, but the kitchen includes 3.5.

TouchFlo 3d - Are you using the version that I included in the kitchen? I do not have these problems.

Windows View - There may be a regedit that controls where Album looks for pictures and which it defaults to. As for album art, every song I play that has album art in the folder displays just fine on Titanium.

QuickGPS - This may be attributed to the NetCF problem, but the version I included with the kitchen does work, if nothing was changed. In fact, that's the only version I have ever used on all rom versions.

Removing Unused Apps - This is a kitchen so you don't have to select all of the OEMs I've included, only the ones you want. Pocket IRC is definitely not needed.

Hope that helps.

mrnamster · #8 (**permalink**) 07-19-2009, 07:05 PM

Great work on this kitchen as always. I have used your kitchens since trying it out back when I used to use the ppckitchen.org kitchens. Yours has less clutter and is fast so I made the switch although I do like how ppckitchen's has an OEMizer and splash screen features built in.

If anyone is experiencing an issue where the menus don't display properly (can't see top and bottom options, see image 'screen01'), I found that it might be due to the following:

Code:

 
      <characteristic type="HKLM\System\GWE\Menu">
         <parm name="AniType" datatype="integer" value="6"/>
      </characteristic>

Anybody know how to map FN + SYM (= launch web browser) it to IE?

Also, I'm experiencing that text issue and it's showing two suggestion boxes. (see image 'screen.jpg')
Registry edit doesn't seem to work:

Code:

      <characteristic type="HKCU\ControlPanel\Sip">
         <parm name="SuggWords" datatype="integer" value="0"/>....

Any advice would be appreciated.

**electronicrice** · #9 (**permalink**) 07-22-2009, 02:19 AM

Quote:

Originally Posted by mrnamster

Great work on this kitchen as always. I have used your kitchens since trying it out back when I used to use the ppckitchen.org kitchens. Yours has less clutter and is fast so I made the switch although I do like how ppckitchen's has an OEMizer and splash screen features built in.

If anyone is experiencing an issue where the menus don't display properly (can't see top and bottom options, see image 'screen01'), I found that it might be due to the following:

Code:

 
      <characteristic type="HKLM\System\GWE\Menu">
         <parm name="AniType" datatype="integer" value="6"/>
      </characteristic>

Anybody know how to map FN + SYM (= launch web browser) it to IE?

Also, I'm experiencing that text issue and it's showing two suggestion boxes. (see image 'screen.jpg')
Registry edit doesn't seem to work:

Code:

      <characteristic type="HKCU\ControlPanel\Sip">
         <parm name="SuggWords" datatype="integer" value="0"/>....

Any advice would be appreciated.

Go ahead and try the newest iteration of the kitchen. I definitely know what you're talking about but I haven't been using that version for quite some time. I'm pretty this has been resolved in the later builds of 6.5.

mrnamster · #10 (**permalink**) 07-23-2009, 02:04 AM

Quote:

Originally Posted by electronicrice

Go ahead and try the newest iteration of the kitchen. I definitely know what you're talking about but I haven't been using that version for quite some time. I'm pretty this has been resolved in the later builds of 6.5.

Thank you for the reply.

I'm downloading the new kitchen right now!

UPDATE: New kitchen and build is running great so far. Very fast cooking action! Word suggestion issue seems to be resolved.