PPCGeeks
Page 85 of 141 « First 35758384 85 868795135 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   CDMA TP Development (http://forum.ppcgeeks.com/forumdisplay.php?f=68)
-   -   Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team (http://forum.ppcgeeks.com/showthread.php?t=42503)

Firefightergmo 07-23-2009 08:41 PM
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 
Quote:
Originally Posted by razorloves (Post 1051428)
no biggie man. no apology necessary.
most of the custom roms here are carrier generic and will work on any cdma network, so the mms is left out of the rom because it is carrier specific. Most chefs provide it on the first page of their thread. MightyMike provides arcsoft in post #5 of his thread.
thanks again for your support guys! This TP is the best EVER!!

razorloves 07-23-2009 08:46 PM
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 
Quote:
Originally Posted by pimpin6996 (Post 1055579)
ok so i used the "sprintrelocker" from http://forum.ppcgeeks.com/showthread.php?t=61333 it stuck my phone is "loading". i had to pull the sd card and flash Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship it worked but my the spl is spl.0.35.0000 not 0.37.0000 and now it wont unlock. what can i do?
follow the direction in post #1 to run the .37 relocker through your computer. If that don't work, then let me know.

jrowe1977 07-24-2009 05:42 AM
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 
:???:I have been tring to use this unlocker but everytime I try to open it it say I do not have permission what do I need to do to correct this thanks

KillAByteZ 07-24-2009 12:18 PM
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 
I just got my new TP in the mail and was about to relock but When I went in bootloader mode, the SPL was .36 000. will it matter whats spl i have?? I just sent in my old TP with spl .37.

razorloves 07-24-2009 03:38 PM
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 
Quote:
Originally Posted by KillAByteZ (Post 1057298)
I just got my new TP in the mail and was about to relock but When I went in bootloader mode, the SPL was .36 000. will it matter whats spl i have?? I just sent in my old TP with spl .37.
hey killabytez...how's it goin man,
I don't think it matters. One of the touch pros i got a couple months back had that same version. So I did some digging and found that a few other people have received touch pro's with that spl too. It still unlocks and locks fine with the spl 37

iknowsquat 07-25-2009 04:31 AM
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 
Hi. I cant unlock.
Sprint TP
spl 37-got error, had to quit
spl manual-goes to bootloader screen then stops?
what am i missing?
any help is greatly appreciated.
sorry if answered, post is huge.

Edit:
Error details=TypeLoadExcetion
File or assembly name 'System,
Version=2.0.0.0, Culture=neutral,
PublicKeyToken=B77A5C561934E089', or
one of the dependencies, was not found.

razorloves 07-25-2009 04:53 AM
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 
Quote:
Originally Posted by winmonewbie (Post 1058899)
Hi. I cant unlock.
Sprint TP
spl 37-got error, had to quit
spl manual-goes to bootloader screen then stops?
what am i missing?
any help is greatly appreciated.
sorry if answered, post is huge.

Edit:
Error details=TypeLoadExcetion
File or assembly name 'System,
Version=2.0.0.0, Culture=neutral,
PublicKeyToken=B77A5C561934E089', or
one of the dependencies, was not found.
did you follow the "preparations" and the "instructions" in post 1?
just connect your phone to the computer and make sure an activesync connection is established, then run the Raphael_CDMA_HSPL_037.exe on your computer.

i3ladeX 07-25-2009 06:25 AM
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 
Hey! I've downloaded and installed the .25 MFG on my phone, but I cant get the MightRom on there. I keep getting and error about "Invalid ID" can someone help me out please!?

razorloves 07-25-2009 06:49 AM
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 
Quote:
Originally Posted by i3ladeX (Post 1058939)
Hey! I've downloaded and installed the .25 MFG on my phone, but I cant get the MightRom on there. I keep getting and error about "Invalid ID" can someone help me out please!?
hey there and welcome to ppcgeeks.
why are you trying to use the .25? You should only use the .35 or .37, depending on which phone you have. Read the first post.

iknowsquat 07-25-2009 09:34 AM
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 
Quote:
Originally Posted by razorloves (Post 1058908)
did you follow the "preparations" and the "instructions" in post 1?
just connect your phone to the computer and make sure an activesync connection is established, then run the Raphael_CDMA_HSPL_037.exe on your computer.
Thank you for the quick response. My name says it all. This is my first attempt at unlock/flashing. All my mods to date have been within the stock ROM. I goofed and took instructions as 'on device' :???:. oops.
I will give it another go, the right way.
Thanks again.


All times are GMT -4. The time now is 03:54 PM.
Page 85 of 141 « First 35758384 85 868795135 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0