...RSTG Rom & Kitchen -=- Rhodium_v1D v3.R1d.15 FuzeBerry II 4/11/09 - Page 40

madcook · #**391** (**permalink**) 04-28-2009, 02:42 AM

am i goin have any problems if i take odf fuzberry in the kitchen any advice would b kool

**rstoyguy** · #**392** (**permalink**) 04-28-2009, 07:41 AM

Quote:

Originally Posted by salisburyl

am i goin have any problems if i take odf fuzberry in the kitchen any advice would b kool

There were some files deleted, about 4-5. I don't recall what they were as I was expecting a Rhodium update and a new release by now....

madcook · #**393** (**permalink**) 05-01-2009, 10:04 AM

hey any time frame on your kitchen dropin maybe one with rhodium but without fuzeberry ,one thing my be you my put cleanram in there the 1.8 ver.just some thoughts ,oh hey is that new rhoduim going to have the timezone fix in it

**rstoyguy** · #**394** (**permalink**) 05-01-2009, 10:20 AM

Quote:

Originally Posted by salisburyl

hey any time frame on your kitchen dropin maybe one with rhodium but without fuzeberry ,one thing my be you my put cleanram in there the 1.8 ver.just some thoughts ,oh hey is that new rhoduim going to have the timezone fix in it

You could run it through an OEM maker and copy just the *_manila files back in. But there probably won't be any updates for a while. Last I heard they are unable to modify the scripts cause they are in chinese, and they also need someone to port over the dialer that is required for the update to work as well.

madcook · #**395** (**permalink**) 05-02-2009, 02:56 AM

i want to add some files to the programs list so what windows so my question is how doi i write the dir for initflashfiles ,the programs are nuebattery,cleanram if couldnt tell im a little lost

so what i have right is download your zzz-oem and put the files in the oem folder but have gottin any ferther than that i thank you for helping me all of problems your the best dude

**rstoyguy** · #**396** (**permalink**) 05-02-2009, 08:15 AM

Quote:

Originally Posted by salisburyl

i want to add some files to the programs list so what windows so my question is how doi i write the dir for initflashfiles ,the programs are nuebattery,cleanram if couldnt tell im a little lost

so what i have right is download your zzz-oem and put the files in the oem folder but have gottin any ferther than that i thank you for helping me all of problems your the best dude

Customizing Your Rom: Adding Personal Files & Other Stuff has the best explanation probably in post #2 on the initflashfiles.txt. If you can attach the OEM's I can look at them for you.

And I think Customize your StartMenu for PPCKitchen.org's - BuildOS - Tutorial explains the start menu decently as well.

Your not building a super rom are you? One that will put me out of business? lol...

madcook · #**397** (**permalink**) 05-02-2009, 11:49 AM

na im just trying to have some fun hehe

**boggsie** · #**398** (**permalink**) 05-05-2009, 08:02 PM

Up to ... oh, I don't know, the past four or five weeks, I have not been able to avoid the first boot wizard and "pre-calibrate" my stylus.

In order to do this you have to go into the kitchen and search out all of the PROVXML and RGU files to remove the registry entries that setup the first boot requirements.

So, this week, I had determined that I was going to resolve this issue ... and I can't figure it out.

Code:

 
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\test]
"CalibrationData"="506,492 835,835 834,158 170,165 173,837"
"MFGCalibrated"=dword:00000001
 
[HKEY_LOCAL_MACHINE\Software\Microsoft\Welcome]
"Disable"=dword:FFFFFFFF

I am starting to wonder if Microsoft or HTC has recently added another setting which I'm not aware of ...

Does anybody else mess with avoiding first boot wizadry and if you were successful with recent builds, how did you manage it?

Best regards,
-boggsie

**rstoyguy** · #**399** (**permalink**) 05-05-2009, 08:26 PM

Quote:

Originally Posted by boggsie

Up to ... oh, I don't know, the past four or five weeks, I have not been able to avoid the first boot wizard and "pre-calibrate" my stylus.

In order to do this you have to go into the kitchen and search out all of the PROVXML and RGU files to remove the registry entries that setup the first boot requirements.

So, this week, I had determined that I was going to resolve this issue ... and I can't figure it out.

Code:

 
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\test]
"CalibrationData"="506,492 835,835 834,158 170,165 173,837"
"MFGCalibrated"=dword:00000001
 
[HKEY_LOCAL_MACHINE\Software\Microsoft\Welcome]
"Disable"=dword:FFFFFFFF

I am starting to wonder if Microsoft or HTC has recently added another setting which I'm not aware of ...

Does anybody else mess with avoiding first boot wizadry and if you were successful with recent builds, how did you manage it?

Best regards,
-boggsie

If your on wm6.5, threw me for a loop too. They've changed the codes. If you take that out of the provxml and move it to the RGU, it seems to skip setup all together and your left with no touching your touch as the screen isn't touch sensitive. Here's the entry from jd's g52 kitchen 21501:mxipupdate_oemoperators_101.provxml:

<characteristic type="HKLM\Software\Microsoft\Welcome" translation="filesystem" >
<parm name="Disable" datatype="integer" value="-3" />
</characteristic>

hmm...changed in jd's kitchen. It was set to "177" in his 21501 kitchen which gave me calibrate, stylus, and password setups....

**boggsie** · #**400** (**permalink**) 05-05-2009, 09:07 PM

Quote:

Originally Posted by rstoyguy

If your on wm6.5, threw me for a loop too. They've changed the codes. If you take that out of the provxml and move it to the RGU, it seems to skip setup all together and your left with no touching your touch as the screen isn't touch sensitive. Here's the entry from jd's g52 kitchen 21501:mxipupdate_oemoperators_101.provxml:

<characteristic type="HKLM\Software\Microsoft\Welcome" translation="filesystem" >
<parm name="Disable" datatype="integer" value="-3" />
</characteristic>

hmm...changed in jd's kitchen. It was set to "177" in his 21501 kitchen which gave me calibrate, stylus, and password setups....

I'm too old school to dig on 6.5 just yet. The first thing I do after a clean XP install is make it look like NT4/W2K by turning off themes, etc.

But, I am having this challenge with 21042 and it seems odd that it would change so late in the life of a codebase. I'm willing to entertain the thought that I'm not doing it right, but I thought I would ask here, because you figure out all of this stuff long before mere mortals like myself dive in!

Oh, btw ... I don't recall ever seeing NyHEX Editor closing without a crash on any other rom except yours.

Best regards,
-boggsie