PPCGeeks
Page 11 of 12 « First 910 11 12
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   CDMA Diamond Development (http://forum.ppcgeeks.com/forumdisplay.php?f=67)
-   -   Custom VGA OEM Requests ....Get them here! Updated 6/13/2009 (http://forum.ppcgeeks.com/showthread.php?t=47505)

madcook 05-24-2009 12:29 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
hey rstoyguy thanx to your tutorial i made my first oem it was opera 15613 just a test but still thanx

mwalt2 05-29-2009 09:29 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
I have a problem with duplicate files when I create my OEM. The OEM made by packagecreator creates a setupdll.dll file. There is also a file of that name in another OEM that I am trying to use. They have different file sizes, but give duplicate errors in buildOS. I have the option checked to prefix files for duplicates, but it does not prefix the setupdll.dll file. How can I get around this problem? Thanks.

rstoyguy 05-29-2009 09:43 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by mwalt2 (Post 943884)
I have a problem with duplicate files when I create my OEM. The OEM made by packagecreator creates a setupdll.dll file. There is also a file of that name in another OEM that I am trying to use. They have different file sizes, but give duplicate errors in buildOS. I have the option checked to prefix files for duplicates, but it does not prefix the setupdll.dll file. How can I get around this problem? Thanks.
Those are usually safe to delete. They are usually run when the .cab is installed, you just gotta figure out what they do...

Trident 05-29-2009 10:29 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
I read the first few pages of posts... skimmed actually.
You mention that these OEMs are designed for the PPCG OEM.rar files in the kitchen that's in the stickys.
Will they also work in kitchens like Calkulin's?

rstoyguy 05-29-2009 10:36 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by Trident (Post 943972)
I read the first few pages of posts... skimmed actually.
You mention that these OEMs are designed for the PPCG OEM.rar files in the kitchen that's in the stickys.
Will they also work in kitchens like Calkulin's?
Yep, and unless otherwise noted diamond/touchpro as well. This all got started back when chef's didn't release kitchens, and ppckitchen was born. Now there are a ton of kitchens and should work for most. As long as the programs work on the device/wmversion it's good. And I've used calkulins kitchen tools since I jumped to a vga device, so....and tested. :)

Those kitchen guys can only provide so many OEM's... :occasion5:

Trident 05-31-2009 01:34 AM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
1 Attachment(s)
Is it possible to get an OEM for the newest tsowen taskbar that will work on a WM6.5 ROM (using the Sprint signal strength settings and including sdkcerts)?

Attached for your convenience. :mrgreen:

indagroove 05-31-2009 02:47 AM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
1 Attachment(s)
Quote:
Originally Posted by Trident (Post 945764)
Is it possible to get an OEM for the newest tsowen taskbar that will work on a WM6.5 ROM (using the Sprint signal strength settings and including sdkcerts)?

Attached for your convenience. :mrgreen:
You don't need an oem for that. I've extracted the files for you (attached) and you can do one of two things with it:

1. Drop all the files into OEMDrivers (or pretty much any OEM package for that matter, and then delete all duplicate files from OEM and SYS.
2. Just replace all the files in OEM and SYS with the once in the attachment.

If you really need an oem for this, just run the folder through package creator to create rgu, dsm, and option.xml.

rstoyguy 05-31-2009 07:46 AM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
1 Attachment(s)
Quote:
Originally Posted by Trident (Post 945764)
Is it possible to get an OEM for the newest tsowen taskbar that will work on a WM6.5 ROM (using the Sprint signal strength settings and including sdkcerts)?

Attached for your convenience. :mrgreen:
Convience is good! And here is my version. I started using the provxml for this particular one when the RGU contents wouldn't override a registry edit in the phone canvas OEM in some kitchens. May require a soft reset as I think the battery icons are loaded before the provxml is run. And a new set...I've already switched back to 6.1...grrrr. :)

Trident 05-31-2009 01:26 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by rstoyguy (Post 945961)
Convience is good! And here is my version. I started using the provxml for this particular one when the RGU contents wouldn't override a registry edit in the phone canvas OEM in some kitchens. May require a soft reset as I think the battery icons are loaded before the provxml is run. And a new set...I've already switched back to 6.1...grrrr. :)
Does SDKcerts need to be run before this or is it included and/or not needed?

Quote:
Originally Posted by indagroove (Post 945847)
You don't need an oem for that. I've extracted the files for you (attached) and you can do one of two things with it:

1. Drop all the files into OEMDrivers (or pretty much any OEM package for that matter, and then delete all duplicate files from OEM and SYS.
2. Just replace all the files in OEM and SYS with the once in the attachment.

If you really need an oem for this, just run the folder through package creator to create rgu, dsm, and option.xml.
This seems like a great option. This way this will be the default, correct?
Will it still show up as an installed "program"?
Are the duplicates in a particular folder anywhere? Browsing through the OEM and SYS folders in the kitchen, I couldn't find any of them. #2 therefore has the same issue.

You guys are so good.
Really.

rstoyguy 05-31-2009 01:35 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by Trident (Post 946259)
Does SDKcerts need to be run before this or is it included and/or not needed?

You guys are so good.
Really.
SDKcerts is included in both the RGU and provxml. It is basically a security certificate in a registry entry form...

madcook 05-31-2009 05:10 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
i dont know what im doing wrong but i cant seem to make a phm editor or pocket rar oem well i was tring to to make two oems one of each .i have made an opera but no luck on this two what do you differant to make this work btw i did find them in oem from but i still want know

rstoyguy 05-31-2009 05:51 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by salisburyl (Post 946587)
i dont know what im doing wrong but i cant seem to make a phm editor or pocket rar oem well i was tring to to make two oems one of each .i have made an opera but no luck on this two what do you differant to make this work btw i did find them in oem from but i still want know
Say you have two OEM's, utils1 and utils2...
Take the utils2 OEM and copy the files from it into the utils1, EXCEPT the following files:
*.DSM
*.RGU
initflashfiles.txt
options.xml

Then you take the contents of the utils2 RGU and cut and paste the contents into the utils1 RGU keeping the original content. Then do the same with the initflashfiles.txt file, copy the contents from utils2 OEM and paste it into utils1 OEM keeping the original contents in both. Now edit the description inside the utils1 OEM and delete the utils2 OEM. You've made your first mega-pack! Your gathering a good set of skills senior! :) Keep it up!

And in the RGU, be sure to keep the two blanks lines at the bottom to keep buildos happy!

Trident 06-02-2009 01:00 AM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
1 Attachment(s)
Can we get an OEM for this KB?

jtvgeo 06-02-2009 01:13 AM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
1 Attachment(s)
Quote:
Originally Posted by Trident (Post 949493)
Can we get an OEM for this KB?

here u go

Trident 06-02-2009 03:15 AM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
1 Attachment(s)
Quote:
Originally Posted by rstoyguy (Post 945961)
Convience is good! And here is my version. I started using the provxml for this particular one when the RGU contents wouldn't override a registry edit in the phone canvas OEM in some kitchens. May require a soft reset as I think the battery icons are loaded before the provxml is run. And a new set...I've already switched back to 6.1...grrrr. :)
When I just used this in the new grooveKitchen it threw up an error about there being a duplicate of BTDiscoverable.bmp-- any idea where this is also hiding so I can delete it instead of this taskbar?

I found where I messed up. But now, with the ROM flashed, I get no custom icons at all. Something ain't right here.

I can't seem to get the OEM to work and I don't really understand inda's instructions regarding replacing the OEM & SYS files or deleting them after dropping them in OEMDrivers. HOw do I find all of them to delete/replace them?

I think it's time for bed...
I got pretty far, but am stuck on this error. notify.dll.0409.mui is a directory and not a file or some such thing. (see capture)
I found the file/folder in the taskbar OEM and in a SYS folder as well, but don't know if I should delete one of them or do something else.

rstoyguy 06-02-2009 09:13 AM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by Trident (Post 949643)

I think it's time for bed...
I got pretty far, but am stuck on this error. notify.dll.0409.mui is a directory and not a file or some such thing. (see capture)
I found the file/folder in the taskbar OEM and in a SYS folder as well, but don't know if I should delete one of them or do something else.
The file is located in ..\SYS\Base_Lang_0409, and you'll want to navigate to that directory and delete the "directory-looking" file and it's contents. Then you can drop that in whereever you want, I've got a seperate OEM for the taskbar.

pixelwix 06-02-2009 05:45 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
anyone have the latest tf3d oem with altel brown skin that i can use on a 6.5 rom? all the once i've tried don't start tf3d or make the rom crash!!!, please help me out i'm using juiceys kitchen and i don't really care for tf3d2...

indagroove 06-02-2009 11:44 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by Trident (Post 949643)
When I just used this in the new grooveKitchen it threw up an error about there being a duplicate of BTDiscoverable.bmp-- any idea where this is also hiding so I can delete it instead of this taskbar?

I found where I messed up. But now, with the ROM flashed, I get no custom icons at all. Something ain't right here.

I can't seem to get the OEM to work and I don't really understand inda's instructions regarding replacing the OEM & SYS files or deleting them after dropping them in OEMDrivers. HOw do I find all of them to delete/replace them?

I think it's time for bed...
I got pretty far, but am stuck on this error. notify.dll.0409.mui is a directory and not a file or some such thing. (see capture)
I found the file/folder in the taskbar OEM and in a SYS folder as well, but don't know if I should delete one of them or do something else.
When you add oems, and get errors during BuildOS, that usually means that you have duplicate files. You can't have more than one of any given specific file name. Therefore, you just need to use your PC's simple search tool to search you kitchen and/or sys/oem folders.

In this case of directory and not a file, that usually means that you have duplicates, and one is a dll file, and one is a dll module (looks like a folder with a few files inside of it).

Some taskbar dlls are in oem, and some in sys by default, so you gotta check both locations.

Trident 06-03-2009 09:05 AM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by indagroove (Post 951632)
When you add oems, and get errors during BuildOS, that usually means that you have duplicate files. You can't have more than one of any given specific file name. Therefore, you just need to use your PC's simple search tool to search you kitchen and/or sys/oem folders.

In this case of directory and not a file, that usually means that you have duplicates, and one is a dll file, and one is a dll module (looks like a folder with a few files inside of it).

Some taskbar dlls are in oem, and some in sys by default, so you gotta check both locations.
I was trying this way too late/early. I figured out exactly what you said to do and it worked perfectly the next day.

The way I understand it, I could have used the rar you posted and done the same thing manually, correct? Just search for each file and replace it with the new ones?

indagroove 06-03-2009 05:17 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by Trident (Post 952033)
I was trying this way too late/early. I figured out exactly what you said to do and it worked perfectly the next day.

The way I understand it, I could have used the rar you posted and done the same thing manually, correct? Just search for each file and replace it with the new ones?
Exactly. That's what I do when I use custom taskbar icons. Why waste time and space with .dsm, .rgu, option.xml, when you have to delete the duplicates anyway? The only good reason that I can think of, is so that they stay with your oem base, and when you upgrade your sys you will already have them in your kitchen, and judt have to delete the sys dlls. Either way, it works fine. BTW, I've never needed to include sdkcerts when cooking in taskbar dlls.

SOHKis 06-04-2009 02:03 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Tachi phone canvas has been ported! - http://forum.ppcgeeks.com/showthread.php?p=953724#post953724

InvincibleLiving 06-04-2009 03:41 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by SOHKis (Post 954637)
Tachi phone canvas has been ported! - http://forum.ppcgeeks.com/showthread...724#post953724
thanks for this news!

KingArthur 06-05-2009 10:06 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
rstoyguy,

can you make this Tachi Black phone canvas in an OEM. I tried but it has 2 exe's in the zip and not sure what to do with both.


http://www.mediafire.com/file/d5dyzj...2d_BlackV1.cab

rstoyguy 06-06-2009 12:46 AM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by KingArthur (Post 957664)
rstoyguy,

can you make this Tachi Black phone canvas in an OEM. I tried but it has 2 exe's in the zip and not sure what to do with both.


http://www.mediafire.com/file/d5dyzj...2d_BlackV1.cab
I did have to manage a duplicate RGU and DSM file, but no links are required as far as I can tell for the .exe's. Windows/reg edits will handle them just fine...Untested by here ya go!

OEM_Tachi_v2d_BlackV1

KingArthur 06-06-2009 02:16 AM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by rstoyguy (Post 957956)
I did have to manage a duplicate RGU and DSM file, but no links are required as far as I can tell for the .exe's. Windows/reg edits will handle them just fine...Untested by here ya go!

OEM_Tachi_v2d_BlackV1
I got it to work.... thanks :headbang:

Trident 06-07-2009 04:51 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
1 Attachment(s)
I got another taskbar... now that I know how to do this... very cool.

Hivez 06-11-2009 02:09 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
3 Attachment(s)
I'm having some difficulties getting a few cab's to oem's
can someone help me with the following

Thanks,
Hivez

//edit LiveSearch is v4.5.3129.0
TouchPal I've oem'd and won't show up as a sip, so if someone can add it that'd be great

madcook 06-11-2009 07:26 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
think i have all of those post when i get home soon

madcook 06-11-2009 11:03 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
1 Attachment(s)
here sorry it took so long i forgot till i saw someone thank me and i remembered but the touch pal is ver 32.

rstoyguy 06-11-2009 11:06 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Your welcome. lol... I'm being a slacker lately. :)

Hivez 06-11-2009 11:20 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by salisburyl (Post 969993)
here sorry it took so long i forgot till i saw someone thank me and i remembered but the touch pal is ver 32.
Thanks for the livesearch + Arcsoft, If possible could you OEM up TouchPal 4.0 (Cooktek's SIP)
Much appreciated
Josh

madcook 06-11-2009 11:21 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by rstoyguy (Post 969996)
Your welcome. lol... I'm being a slacker lately. :)
just trying to help where i can after asking so many questions and i still have so many questions left lol theres so much to learn :drunken:

msl7052 06-12-2009 07:46 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Anyone have an OEM of UITweeker
here is the link for the .cab
http://forum.ppcgeeks.com/attachment...0&d=1232484918

I was also looking for an OEM of a program called C-ApiSRO that i use for Sirius radio but i cant find a link for the .cab anywhere. Any help would be greatly appreciated.

rstoyguy 06-12-2009 11:24 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by msl7052 (Post 971713)
Anyone have an OEM of UITweeker
here is the link for the .cab
http://forum.ppcgeeks.com/attachment...0&d=1232484918

I was also looking for an OEM of a program called C-ApiSRO that i use for Sirius radio but i cant find a link for the .cab anywhere. Any help would be greatly appreciated.
OEM_UITweaker .................................... UI Tweaker v0.5.4.3

OEM_TouchPal_v4.0_VGA ......................... CooTek TouchPal v4.0 VGA Global Edition

Both untested, UITweaker is pretty straight forward, and touchpal should be good as well. Please report back if they do or do not work!

edit: both tested good by me! :)

msl7052 06-13-2009 12:04 AM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by rstoyguy (Post 972061)
OEM_UITweaker .................................... UI Tweaker v0.5.4.3

OEM_TouchPal_v4.0_VGA ......................... CooTek TouchPal v4.0 VGA Global Edition

Both untested, UITweaker is pretty straight forward, and touchpal should be good as well. Please report back if they do or do not work!
'
youre the man , thank you

rstoyguy 06-13-2009 12:23 AM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
1 Attachment(s)
Quote:
Originally Posted by Trident (Post 960553)
I got another taskbar... now that I know how to do this... very cool.
Apologize about the response time. :oops: Better late than never though!

rstoyguy 06-13-2009 10:05 AM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by msl7052 (Post 971713)
I was also looking for an OEM of a program called C-ApiSRO that i use for Sirius radio but i cant find a link for the .cab anywhere. Any help would be greatly appreciated.
Looking for this version? http://forum.ppcgeeks.com/showthread.php?t=26310 C-ApiSRO_Setup_v2.0.5.zip

OEM_C-ApiSRO_v2.0.5 ..................... C-ApiSRO v2.0.5 XM/Sirius Client (PPCGeeks link)

msl7052 06-13-2009 10:07 AM
Re: Custom VGA OEM Requests ....Get them here! Updated 4/26/2009
 
Quote:
Originally Posted by rstoyguy (Post 972543)
Looking for this version? http://forum.ppcgeeks.com/showthread.php?t=26310 C-ApiSRO_Setup_v2.0.5.zip

OEM_C-ApiSRO_v2.0.5 ..................... C-ApiSRO v2.0.5 XM/Sirius Client (PPCGeeks link)

THANK YOU VERY MUCH, UITweeker worked flawlesly, Im going to cook something up and tryC-ApiSRO now, I cant thank you enough

OEM_C-ApiSRO_v2.0.5 ..................... C-ApiSRO v2.0.5 XM/Sirius Client (PPCGeeks link)[/quote]

: tried it and it worked no problem.

boggsie 06-14-2009 03:32 PM
Re: Custom VGA OEM Requests ....Get them here! Updated 6/13/2009
 
1 Attachment(s)
This seems to work ... for the masses!

Best regards,
-boggsie

msl7052 06-26-2009 12:11 AM
Re: Custom VGA OEM Requests ....Get them here! Updated 6/13/2009
 
anyone got an OEM for a green flip clock that will work with Rhodium Manila? i have one but it shows 0:00 no matter what TF3D i cook


All times are GMT -4. The time now is 10:07 PM.
Page 11 of 12 « First 910 11 12
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0