[10/06/08] JUICY ROM 2.4.1 [CE OS 5.2.20755 Build 19965][TELUS][Sprint]

[CircaV12]

Originally Posted by jblade

Keep getting the following error: "Not enough memory to launch audio manager" (randomly) and then touchflo restarts when I go back to today screen

soft reset fixed mine

[kngri]

I'm getting allot of "Tap Here to launch TouchFLO" Is this normal? It just happens for no reason of my own...

[detroit_doug]

OK here goes with what I found thus far,

1) Audio Mgr - consistantly coming up with "not enough memory" error - have tried killing background apps, reloaded ROM and started right off the bat and still same error (after this Im reflashing from the PC fully to V1.4 and trying again)

2) Volume Issue - I think I finally figured out the adjusting volume issue people are talking about, had the wife call me, activated speaker phone and had her just talk in the background while I checked a few things, adjusting the System sound level and Ringer volume level can occur but any changes do NOT affect the volume level of the speaker phone while in call directly, although quite loud to start with which a speaker phone should be, can see how the receiver may want it higher or lower depending on location and unable to change - now the on-screen and the volume slider on side of the phone do nothing in regards to the level of the volume in call only, outside of a call all is fine

Everything else seems fine and as stated going to fully flash V1.4 and see if things change with the 2 issues mentioned as I did notice a weird occurrence right after the first start - the autorun/customizations took place then just sat at the desktop - didnt reboot automatically like it should have that may be the issue as something may have corrupted or locked in the installation



Detroit Doug

[ghebbns]

Thanks Juicy and everyone for the great ROMS. Just flashed 2.2 and it solved my no GPS problem I was having with 2.1 (but this probably was due to something I did to the phone - not 2.1).

I am experiencing the jumping signal bars that was a problem a few releases ago. Also, yesterday (with 2.1) I was having poor reception issues (i.e. couldn't get a signal in a place that I know I should be able to). Just for a test, I called my cell from my home number and all of a sudden the signal bars went solid at 3 bars. As soon as I hung up, they started bouncing again. Is there any changes in 2.2 that would cause this?

Greg

[jblade]

For those who use default contacts.exe and want the letter scroller on the side

Random_access .cab

[detroit_doug]

Originally Posted by kngri

I'm getting allot of "Tap Here to launch TouchFLO" Is this normal? It just happens for no reason of my own...

Thats the Manila/Touchflo interface crashing - Im looking into it as it is happening on mine as well, currently about 50% into a full reload of the ROM from the PC to the device

Detroit Doug

[Juicy47]

I need your support

[J0KER]

Originally Posted by thermodynamic

Page pool might actually be stored in RAM, not ROM. I'm not sure of this, but I've edited my original post just in case.

The PP is stored in RAM.Thats what the "teetering" issue with pagepools vs available RAM vs performance is all about.

The whole reason to have a page pool is to "cache" app bits from ROM into a small dedicated area of RAM, in order to boost the performance of apps located in ROM. Without a PP, the RAM can be used to cache ALL ROM bits.

On our Diamonds, since we have a very large amount of RAM, I just dont see the need to increase the pp size. We have enough RAM to cache our entire ROM X2, and still have plenty left over. So why waste the cycles needed to create, maintain, and groom a pagepool?

[Whosdaman]

Originally Posted by jblade

For those who use default contacts.exe and want the letter scroller on the side

Random_access .cab

Originally Posted by detroit_doug

Thats the Manila/Touchflo interface crashing - Im looking into it as it is happening on mine as well, currently about 50% into a full reload of the ROM from the PC to the device

Detroit Doug

I thought random access was already in my ROM.....but I guess it's not, I will add it in v1.5...

I will also work on the Audio Manager problem....but it's hard since it never happens to me

[Juicy47]

Originally Posted by J0KER

The PP is stored in RAM.Thats what the "teetering" issue with pagepools vs available RAM vs performance is all about.

The whole reason to have a page pool is to "cache" app bits from ROM into a small dedicated area of RAM, in order to boost the performance of apps located in ROM. Without a PP, the RAM can be used to cache ALL ROM bits.

On our Diamonds, since we have a very large amount of RAM, I just dont see the need to increase the pp size. We have enough RAM to cache our entire ROM X2, and still have plenty left over. So why waste the cycles needed to create, maintain, and groom a pagepool?

Nice explanation... the 16MB PP being faster may just be in my head. Do you think 6MB stock PP is sufficient? What size do you find most efficient?

I can work this into future versions, I just want feedback from yourseld and other users first.