Mod gingerbread with 3d driver plus gralloc.12.29.10
 

12.29.10

HOW TO INSTALL VIDEO

http://www.youtube.com/watch?v=833C5nvuU4Y
================================================== ============================
12.29.10

HOW TO CREATE FAT32 AND EXT2 VIDEO

http://www.youtube.com/watch?v=b6ID9jWXqVI
================================================== ============================
12.29.10
GINGERBREAD FIRST LOOK VIDEO

http://www.youtube.com/watch?v=AQvZpM4HuI0
================================================== ============================
12.29.10
hi, guys. i know a few people want to explore gingerbread. i know that xda version is not out yet, but i Mod this build (from neopeek) for you to try. this is ext2. this one have all the 3d driver plus gralloc for more power.

NO O/C
NEOCORE 30.1 FPS no textures
FPS2D 30
QUADRANT 560 no textures

GETTING WITH A FULL CHARGE 12HRS

how install.
1-create 1-fat32 2-ext2 310mb. I WILL POST A VIDEO. HOW TO DO THIS
2- WM GO TO SD CARD/NPKINSTALL/PICK YOUR INSTALL STARTUP. YOU CAN USE MY (SPRINT USER)
3- RUN HARET

HOW TO RUN GINGERBREAD
0- WM PLUG YOUR CHARGER.
1- GO TO SD CARD PICK STARTUP. OR USE MY (SPRINT USER.LOCATION IN PROFRAM FILE FOLDER)
2-RUN HARET

setting. very important

1- see the welcome screen don't touch the phone wait for green light
2- don't sync yet. skip everything get to home screen. i add it launcher. pick that.
3- go to wireless & networks/mobiles networks/access point names/menu key and add apn
4- call setting if you have sprint
5- sound. get your sound and ring tone ready
6- location & security setting. unchecked gps satellites.
7- applications. check unknown sources
8- NOW YOU CAN SYNC WITH GOOGLE.
9-let the phone sync. see the green light
10-open all apps. then reboot your phone.

I'M STILL WORKING ON A FEW THINGS FOR MORE STABILITIES.

GOOD LUCK

THANKS

http://www.megaupload.com/?d=AE2V72XQ

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

Thanks for the hard work...I will try this today.

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

awesome, will try this out later today

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

I'm not sure what is wrong, I created an EXT2 partition of 312MB, a FAT32 partition of 7.1GB. Copied all files to the root of the FAT32 partition, copied STARTUP.txt to root of FAT32 partition, run HaRETT, it says it's going through the NEOPEEK install, but when it gets to /sdcard/npkinstall/androidinstall.tar.gz, then it says that it can't find the path. I know for sure the path is there and that the 64+MB androidinstall.tar.gz file is there. Is it not mounting my SD card properly?

Got it working, my EXT2 partition was not set to primary.

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

ok, guys

i'm uploading 3 video on how to. right now.

1- stabilities. "very stable here"
2- how to create fat32 and ext2
3- how to install

thanks

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

it because you doing it wrong. don't worry i will help you.
1- create fat32 first then ext2 both primary partition.
2- go to npkinstall, get your install startup. run haret.
3- sd card "root". get your startup. then run haret.

good luck. thanks

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

First post updated

gingerbread first look video

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

First post updated

how to create fat32 and ext2 video

thanks

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

First post updated

how to install video

thanks

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

Just wanted to say thanks for the upload. This is rather sweet, so far so good. It is smooth, speedy and stable.

Thank you once again.