Mod gingerbread with 3d driver plus gralloc.12.29.10
 

12.29.10

HOW TO INSTALL VIDEO

http://www.youtube.com/watch?v=833C5nvuU4Y
================================================== ============================
12.29.10

HOW TO CREATE FAT32 AND EXT2 VIDEO

http://www.youtube.com/watch?v=b6ID9jWXqVI
================================================== ============================
12.29.10
GINGERBREAD FIRST LOOK VIDEO

http://www.youtube.com/watch?v=AQvZpM4HuI0
================================================== ============================
12.29.10
hi, guys. i know a few people want to explore gingerbread. i know that xda version is not out yet, but i Mod this build (from neopeek) for you to try. this is ext2. this one have all the 3d driver plus gralloc for more power.

NO O/C
NEOCORE 30.1 FPS no textures
FPS2D 30
QUADRANT 560 no textures

GETTING WITH A FULL CHARGE 12HRS

how install.
1-create 1-fat32 2-ext2 310mb. I WILL POST A VIDEO. HOW TO DO THIS
2- WM GO TO SD CARD/NPKINSTALL/PICK YOUR INSTALL STARTUP. YOU CAN USE MY (SPRINT USER)
3- RUN HARET

HOW TO RUN GINGERBREAD
0- WM PLUG YOUR CHARGER.
1- GO TO SD CARD PICK STARTUP. OR USE MY (SPRINT USER.LOCATION IN PROFRAM FILE FOLDER)
2-RUN HARET

setting. very important

1- see the welcome screen don't touch the phone wait for green light
2- don't sync yet. skip everything get to home screen. i add it launcher. pick that.
3- go to wireless & networks/mobiles networks/access point names/menu key and add apn
4- call setting if you have sprint
5- sound. get your sound and ring tone ready
6- location & security setting. unchecked gps satellites.
7- applications. check unknown sources
8- NOW YOU CAN SYNC WITH GOOGLE.
9-let the phone sync. see the green light
10-open all apps. then reboot your phone.

I'M STILL WORKING ON A FEW THINGS FOR MORE STABILITIES.

GOOD LUCK

THANKS

http://www.megaupload.com/?d=AE2V72XQ

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

Thanks for the hard work...I will try this today.

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

awesome, will try this out later today

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

I'm not sure what is wrong, I created an EXT2 partition of 312MB, a FAT32 partition of 7.1GB. Copied all files to the root of the FAT32 partition, copied STARTUP.txt to root of FAT32 partition, run HaRETT, it says it's going through the NEOPEEK install, but when it gets to /sdcard/npkinstall/androidinstall.tar.gz, then it says that it can't find the path. I know for sure the path is there and that the 64+MB androidinstall.tar.gz file is there. Is it not mounting my SD card properly?

Got it working, my EXT2 partition was not set to primary.

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

ok, guys

i'm uploading 3 video on how to. right now.

1- stabilities. "very stable here"
2- how to create fat32 and ext2
3- how to install

thanks

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

it because you doing it wrong. don't worry i will help you.
1- create fat32 first then ext2 both primary partition.
2- go to npkinstall, get your install startup. run haret.
3- sd card "root". get your startup. then run haret.

good luck. thanks

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

First post updated

gingerbread first look video

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

First post updated

how to create fat32 and ext2 video

thanks

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

First post updated

how to install video

thanks

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

Just wanted to say thanks for the upload. This is rather sweet, so far so good. It is smooth, speedy and stable.

Thank you once again.

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

Great work, man!

I'll try it later :)

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

nice rom thanks
is it internet working i am on sprint

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

yes. Use opera

thanks

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

na internet is not working
can you please tell me what im doing wrong

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

my rhod500 can't wake up on incomming call :(, i use it for gsm network and maybe it cause this probleam!!!

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

ok. installed on raph100, seems to work ok. wifi works great, calls works. system is slower then FRG83 and FRX03, but 3d works much better - angry birgs are almost fluent on non OC device :) there is a bug with setting new wallpaper. battery drain seems to be at normal level.

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

try to use another launcher. try launcher pro. it already installer.

thanks

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

TO BE HONEST. IF YOU SEE THE VIDEO, I CHANGE THE WALLPAPER. IT WORKS

1-there is a bug with setting new wallpaper. TRY ANOTHER DRIVER. MAYBE 3D DRIVER 11.29.

THANKS

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

I also change wallpaper, I go to gallery choice pic make set as Wallpaper, then was a GUI restart and after it starts again the new wallpaper apears. This is small problem, the most important is that system works stable :) thank you.

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

yeah. i know gingerbread is new to us. but it going to get better.

thanks

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

headset jack is working in this build ?

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

Once I D/L'ed the file I'm not sure where exactly to place it on the SD card, the current path I'm trying to use is SD/andboot but no luck. Not quite sure what I'm doing wrong but I would love to try this out and give it a test run.

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

it very simple.

this is how i have my. there are two ways.

w/o anboot
1. put every file and folder in root sd card
2. go to startup and delete anboot line

with anboot
1. put your anboot folder in root sd card.
2. go to startup and add this line. rel_path=anboot

good luck. thanks

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

"with anboot
1. put your anboot folder in root sd card.
2. go to startup and add this line. rel_path=anboot"

I have all of this done while running xdandroid so not sure where to put the new information I d/l'ed. I'm sorry I'm stil confused with what you are saying I guess I will have to wait until it is complied on the "stickied" thread

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

Headset jack/BT/Camera any rhod android (including this one).

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

I'm just seeing this thread for the first time... welp there go any plans I had for the rest of the day! lol

Wirelessly posted (Mozilla/5.0 (Linux; U; Android 2.2; en-us; MSM Build/MASTER) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1)

Tempting, oh so tempting.

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

To do it or not to? That is the question!!!!

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

do it, but try this out first instead perhaps!
Hotfile.com: One click file hosting: NAND-2010.12.22.7z
Thats from natemcnutty from
http://forum.ppcgeeks.com/tp2-androi...e-devices.html

then update with this flash file, and mods file(which goes on sdcard after deleteing old one)
http://www.lantowcorporations.com/an...nd12302010.zip

this is the business man.... still a lil buggy, but even with bugs, "better" than winmo and haretDroid in my opinon

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

Received Archos 70 tablet for Xmas and cannot natively use wifi router with tp2. Would it be possible to use Gingerbread as wifi hotspot? It has worked to tether Archos 70 with Android 2.2 and droid incredible.

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

Gingerbread is nice looking, but here are a few things that I notice about this build so far: getting some almost SOD-like experience especially during syncing processes, regular Launcher's telephone icon says program not installed (like it's not mapped to the dialer program), not rooted already like the other older version builds (I guess I'm spoiled... Ha!). Impressive work though! Can't wait to see this as it develops.

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

Not sure if anyone else had fun figuring out the Sprint APN settings tiad8 mentions in the install instructions but I ended up grabbing them from my last running XDAndroid setup, see below. My apologies if this is a repost...

Name: Android
APN: internet
Proxy: <not set>
Port: <not set>
Username: *
Password: *
Server: *
MMSC: null
MMS Proxy: <not set>
MCC: 310
MNC: 995
Authentication type: <not set>
APN type: <not set>

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

Tried the build, but getting kernel panic when running haret. I have all the files at the root of the sd card. Ran npkinstall/install.exe first. After reboot, ran haret.exe from the root of the sd card. I'm having sprint tp2(rhod400), so using tiad's startup.txt.

Missing anything obvious?

UPDATE: Fixed. I first had the files in andboot folder and was getting kernel panic. I moved them to the root of the sd card (but didn't run install.exe again) and was still getting kernel panic. Running install.exe with all the files in the root of sd card that took care of the problem. Device is now booting into android...

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

the keyboard seem quite small compared to the old one i dont know why that is happening

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

tiad8, thanks and appreciate all your efforts to provide a better Android experience.
I have followed each step as you described.
Here is what I did..
Formatted 7.4GB sd card with 1GB ext2 & rest fat32. Unzipped everything from your package and put it on fat32 partition. Chose haret (install) from teh npkinstall folder and the it goes into a boot loop without getting to the android gui. So copied startup from programfile to the sdcard root and ran haret. Android loads fine (can see gingerbread). However, from time to time, processes crash and battery levels are incorrect (example-windows shows 45% vs android shows around 80%). Incoming/outgoing calls work as well as wifi. However, there is no 3G data. Tried fiddling with APN settings but still no luck.
As for gingerbread performance, the apps are sluggish and take a while to load. wifi performance is slow too. I am not sure if I am doing anything wrong or missed something. It is definitely not the same performance as in your videos. Installing angry birds from the market takes for ever over wifi.

I am on sprint using touch pro 2. Any ideas how to setup apn or bring up 3G data?

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

I have the same issue...way too small for my fat fingers.

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

1-Formatted 7.4GB SD card with 1GB ext2 & rest fat32....... FIRST FAT32 THEN EXT2 (TRY 310MD) BOTH HAVE TO BE PRIMARY PARTITION

2-Chose haret (install) from teh npkinstall folder and the it goes into a boot loop without getting to the android gui............. GO TO NPKINSTALL RUN HARET. USE MY INSTALL STARTUP.

3- So copied startup from programfile to the sdcard root and ran haret....... THERE ARE 2 STARTUP. ONE IS TO INSTALL GINGERBREAD IN NPKINSTALL FOLDER AND THE OTHER IS IN LOCATION IN PROGRAM FILE.

VERY IMPORTANT. LEAVE THE STARTUP FROM PROGRAM FILE THERE. GO TO NPKINSTALL FIRST TO INSTALL. WHEN INSTALL IS FINISH IT WILL BOOT BACK TO WM THEN YOU CAN TAKE THE STARTUP AND PUT IT IN ROOT SD CARD.

4-windows shows 45% vs android shows around 80%)...........USE MY BATTERY TRICK. IF ON WM YOU 50% WHEN YOU BOOT INTO ANDROID YOU WILL HAVE 80%, 90% ETC.. LET IT SYNC IN. IT ALWAYS GOOD TO CHARGE YOUR PHONE TO FULL IN WM FOR BEST RESULT. I GET AROUND 12-16 HRS WITH NORMAL USE.

5-As for gingerbread performance, the apps are sluggish and take a while to load. wifi performance is slow too. I am not sure if I am doing anything wrong or missed something. It is definitely not the same performance as in your videos. Installing angry birds from the market takes for ever over wifi.................... YES WE KNOW GINGERBREAD NEEDS MORE WORK. I'M REALLY IMPRESS WITH THIS BUILD.

MY PRIMARY ROM IS (FRX03). THEN GINGERBREAD. I'LL TELL YOU, GINGERBREAD'S DATA IT FAST. SO FAR FOR ME IT WORKING GREAT.

I'M TRYING TO FIX A FEW THINGS RIGHT NOW IN THIS BUILD. IF THIS WORKS FOR ME, WE WILL HAVE A MACHINE.

THANKS

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

Did you try JaYbOmBz's APN settings (today's post)? I used that and my 3G works, albeit with very very slow transfer speeds. I have same slow connection over wifi.

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

Thanks tiad8, I will redo the whole thing and get back.

Re: Mod gingerbread with 3d driver plus gralloc.12.29.10
 

I just tried and 3G worked. Thanks to both of you. 3G is slow for me too.