12.19 3d package with better performance for testing - Page 34

docnas · #**331** (**permalink**) 12-20-2010, 08:14 PM

heh first time newbie trying to learn a lil ok was able to do use the terminal emulator to grab a copy of dmesg saved it to a txt file usinga txt editor (ted i think) tried viewing it on the phone but that was way too much info on too small a screen.going to send it to myself to view it on my comp and see what it says.

ok tried looking at the file and am completely overwhelmed wow thats alotta info there i tried searching for some keywords like "mount" cuz i know the error was relating to mounting but no go mind if i upload the txt file here and if someone can give me a clue what im missing?

**arrrghhh** · #**332** (**permalink**) 12-20-2010, 08:21 PM

Quote:

Originally Posted by docnas

heh first time newbie trying to learn a lil ok was able to do use the terminal emulator to grab a copy of dmesg saved it to a txt file usinga txt editor (ted i think) tried viewing it on the phone but that was way too much info on too small a screen.going to send it to myself to view it on my comp and see what it says.

ok tried looking at the file and am completely overwhelmed wow thats alotta info there i tried searching for some keywords like "mount" cuz i know the error was relating to mounting but no go mind if i upload the txt file here and if someone can give me a clue what im missing?

Well I looked thru it, nothing glaring... But I'm not really sure what I'm looking for either. What issue are you experiencing...? If it's just some error you saw flying by, the chances of you correctly reading it are slim. So unless you're actually experiencing an out of the ordinary issue, I wouldn't worry about it.

docnas · #**333** (**permalink**) 12-20-2010, 08:45 PM

yeah again on loading haret i saw that msg right after the bind/sdcard/libGLES_qcom.so /system/lib/egl/libGLES_qcom.so it gives an error stating no such file or directory
( it was 3 or 4 errors so im guessing 1 for each file).

**arrrghhh** · #**334** (**permalink**) 12-20-2010, 08:48 PM

Quote:

Originally Posted by docnas

yeah again on loading haret i saw that msg right after the bind/sdcard/libGLES_qcom.so /system/lib/egl/libGLES_qcom.so it gives an error stating no such file or directory
( it was 3 or 4 errors so im guessing 1 for each file).

Check the command, make sure it is correct & ensure the files are where you say they are. That's the only thing I can recommend - keep in mind it may have just been a debug message stating that it was mounting the files. Unless you're having an issue, I wouldn't worry about it.

docnas · #**335** (**permalink**) 12-20-2010, 08:52 PM

eh no real problem besides not getting the 22fps on neocore that tiads getting, i do get a respectable 18 and a 594 on quadrant but was hoping for more on neocore.

anyway since this is the first time im really getting into android i was just intrested in what was going on in the backround and all.

Also hoping to help out in being a guinea pig for the devs , since i cant do much in the coding side was thinking of tryin to help out in the quality control side.

**natemcnutty** · #**336** (**permalink**) 12-20-2010, 10:01 PM

Quote:

Originally Posted by docnas

yeah again on loading haret i saw that msg right after the bind/sdcard/libGLES_qcom.so /system/lib/egl/libGLES_qcom.so it gives an error stating no such file or directory
( it was 3 or 4 errors so im guessing 1 for each file).

Which rootfs are you using? What commands do you have in your user.froyo.conf? I'm guessing that it is trying to bind those files from the root of your sdcard, but they do not exist.

Also, I see these:

Code:

[   45.178161] xvmalloc: version magic '2.6.27.46-01231-gfca2168 preempt mod_unload ARMv6 ' should be '2.6.27.46-01232-gb7033df preempt mod_unload ARMv6 '
[   45.216735] ramzswap: version magic '2.6.27.46-01231-gfca2168 preempt mod_unload ARMv6 ' should be '2.6.27.46-01232-gb7033df preempt mod_unload ARMv6 '

These are the files I was talking about us not having on NAND, but ACL schooled me that they are used on haret. It does appear that you have the wrong modules, or the data.img file has old drivers stuck that aren't letting the modules update. I would try moving your current data.img and let it create a new one and see if it has the same issue.

docnas · #**337** (**permalink**) 12-20-2010, 11:50 PM

Just did that deleted my whole andboot folder and started all over again. i used the 11/15 rootfs and froyo.user.conf is the one posted here in this thread specifically im getting an error on these 2 lines it seems

mount --bind /sdcard/libGLESv2_adreno200.so /system/lib/egl/libGLESv2_adreno200.so
mount --bind /sdcard/libq3dtools_adreno200.so /system/lib/egl/libq3dtools_adreno200.so

it runs then then says no such file or directory and yeah im seeing an error regarding ramzswap and one other file

and as for those files not existing i have them in the root of my sdcard i think its the destination thats the problem but again since im a newbie im not sure.

tiger2wander · #**338** (**permalink**) 12-21-2010, 12:46 AM

Quote:

Originally Posted by tiad8

that's really extrange. Did you try it without the drivers. Just normal. Plug in your charger in wm wait for the light. Then run haret. Wait till you see it charging, but don't unplug it yet, let it sync in.

Thanks

Yep, I can charge normally even with FRX03 2.2.1 clean. No need to charge when phone is powered off completely, no need to plugin wall charger when in WM then HaRET to android. Never try offline charge.

If I keep charge when android status display as: "Charged" about 30 minutes or an hours I will get full charged in WM if I reboot to WM.

As I checked many times, it is difference between android and WM:
- Android: 70%
- WM: 57%->60%

I can use it for "daily use" till its get much smoothly with your posted 3D driver and new kernel without go back to WM just for charge except after it got freezed, panic or crash

**[ACL]** · #**339** (**permalink**) 12-21-2010, 03:08 AM

Quote:

Originally Posted by docnas

Just did that deleted my whole andboot folder and started all over again. i used the 11/15 rootfs and froyo.user.conf is the one posted here in this thread specifically im getting an error on these 2 lines it seems

mount --bind /sdcard/libGLESv2_adreno200.so /system/lib/egl/libGLESv2_adreno200.so
mount --bind /sdcard/libq3dtools_adreno200.so /system/lib/egl/libq3dtools_adreno200.so

it runs then then says no such file or directory and yeah im seeing an error regarding ramzswap and one other file

and as for those files not existing i have them in the root of my sdcard i think its the destination thats the problem but again since im a newbie im not sure.

I dont know what you are doing .. but you are doing it all wrong.

i'm not sure if you know this but we dont have adreno200 on the rhod.

docnas · #**340** (**permalink**) 12-21-2010, 03:19 AM

the adreno2000 file was part of the package posted by tiad according to his instructions place that and a few other files in the root of the sdcard and change the froyo.user.conf to mount the files also using his build.prop don't know what he did with the files but did get high quadrant scores of 594 n 601 so something must be right