PPCGeeks
Page 6 of 42 « First 45 6 7816 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Android On TP2 (http://forum.ppcgeeks.com/forumdisplay.php?f=179)
-   -   12.19 3d package with better performance for testing (http://forum.ppcgeeks.com/showthread.php?t=137571)

tiad8 11-30-2010 06:06 PM
Re: 3d driver for testing with gralloc. UPDATED 11.29.10
 
Quote:
Originally Posted by steveoski (Post 2004802)
Hey guys i was wondering if someone would be kind enough to help me out. I am using neopeek frg83 build and the problem is i do not understand how to make this work?

I have the build where it is the 3 different partitions. android, ext2 and linux swap. android is the one where its like storage card etc and the ext2 is the one with all the system stuff. problem is i dont see that with the regular windows explorer. how do i go about getting in there. i added the 11.29 libgles to the android partion where haret is and the gralloc but there was zero difference in the neocore speeds or in general. what am i doing wrong? Thank you very much!
NEOPEEK BUILDS (WINDOWS) (DOWNLOAD WINRAR OR 7 ZIP)
ok. do this. you have two options. 1. sync your phone and travel to your SD card, find the EXT2 tar file. travel to SYSTEM/LIB/EGL/REPLACE THE OLD DRIVER HERE. options 2. turn off your phone, take the SD card out and put into you PC. and do the same. you don't need to update you froyo.user.conf with neopeek build. 1-SYSTEM/LIB/EGL/REPLACE THE OLD DRIVER HERE. 2-SYSTEM/LIB/HW/REPLACE THE OLD GRALLOC HERE. good look. thank you

tpdjr 11-30-2010 06:46 PM
Re: 3d driver for testing with gralloc. UPDATED 11.29.10
 
Hey tiad how do you mount the gralloc if i am running the xdandroid build? I don't know if i did it right and i probably didn't because all I did was put the gralloc on the root of the sd card. Please explain like you did the last time for me thanks

tiad8 11-30-2010 07:28 PM
Re: 3d driver for testing with gralloc. UPDATED 11.29.10
 
Quote:
Originally Posted by tpdjr (Post 2004884)
Hey tiad how do you mount the gralloc if i am running the xdandroid build? I don't know if i did it right and i probably didn't because all I did was put the gralloc on the root of the sd card. Please explain like you did the last time for me thanks
add this to your froyo.user.conf command and don't forget to add gralloc into root. sd card. good luck. thanks

mount --bind /sdcard/gralloc.msm7k.so /system/lib/hw/gralloc.msm7k.so

tpdjr 11-30-2010 08:27 PM
Re: 3d driver for testing with gralloc. UPDATED 11.29.10
 
ok i got it thanks a lot again lol and i made sure i hit thanks. Hey just curious will the fps get even faster because it seems very fast already.

friedmjb 11-30-2010 08:49 PM
Re: 3d driver for testing with gralloc. UPDATED 11.29.10
 
booted Reefer's 11/22 FRX003, Overclocked to 700Mhz using the startup utility with HW3D, etc, with 11/30 gralloc and 11/29 libGLES

Using FPS2D, I benchmarked it at 20FPS - same as the 11/27 libGLES w/o the updated gralloc. I also benchmarked overall speed using Linkpack where I scored an average of 4.5 MFLOPS. This is better than the 3.5 MFLOPS I was getting with 11/27. Angry Birds is still as slow and choppy as ever.

1. How can I be sure that the new gralloc and libGLES was mounted once I am already in Android?
2. Is there a different utility that I should be using for benchmarking?
3. Is there a specific rootFS that I should be using?

tiad8 11-30-2010 09:52 PM
Re: 3d driver for testing with gralloc. UPDATED 11.29.10
 
Quote:
Originally Posted by tpdjr (Post 2004958)
ok i got it thanks a lot again lol and i made sure i hit thanks. Hey just curious will the fps get even faster because it seems very fast already.
to be honest i was getting 17.1. no oc and without the driver. now with it, I'm getting 17.9 but everything that use 3d it's smoother for me now. thanks

tiad8 11-30-2010 10:28 PM
Re: 3d driver for testing with gralloc. UPDATED 11.29.10
 
Quote:
Originally Posted by friedmjb (Post 2004967)
booted Reefer's 11/22 FRX003, Overclocked to 700Mhz using the startup utility with HW3D, etc, with 11/30 gralloc and 11/29 libGLES

Using FPS2D, I benchmarked it at 20FPS - same as the 11/27 libGLES w/o the updated gralloc. I also benchmarked overall speed using Linkpack where I scored an average of 4.5 MFLOPS. This is better than the 3.5 MFLOPS I was getting with 11/27. Angry Birds is still as slow and choppy as ever.

1. How can I be sure that the new gralloc and libGLES was mounted once I am already in Android?
2. Is there a different utility that I should be using for benchmarking?
3. Is there a specific rootFS that I should be using?
1. pc or or Linux, right click at files then properties then you will see how big are the files in kb. now, in android get astro file manager, travel to your system.ext2. system/lib/egl or hw/
2. I use neocore and quadrant from market.
3. it's good, to be up to date. thanks

tpdjr 11-30-2010 11:08 PM
Re: 3d driver for testing with gralloc. UPDATED 11.29.10
 
Quote:
Originally Posted by tiad8 (Post 2005001)
to be honest i was getting 17.1. no oc and without the driver. now with it, I'm getting 17.9 but everything that use 3d it's smoother for me now. thanks


O I have been getting 19 fps to like 19.2 but i am overclocked to 760 mhz

tiad8 11-30-2010 11:40 PM
Re: 3d driver for testing with gralloc. UPDATED 11.29.10
 
Quote:
Originally Posted by tpdjr (Post 2005036)
O I have been getting 19 fps to like 19.2 but i am overclocked to 760 mhz
that great. i like to use stock with no oc. thanks

InvincibleLiving 12-01-2010 01:39 AM
Re: 3d driver for testing with gralloc. UPDATED 11.29.10
 
Quote:
Originally Posted by tiad8 (Post 2004915)
add this to your froyo.user.conf command and don't forget to add gralloc into root. sd card. good luck. thanks

mount --bind /sdcard/gralloc.msm7k.so /system/lib/hw/gralloc.msm7k.so
I'm still not able to get to my computer so I havent been able to try out the gralloc...

Can you post an edited froyo.user.conf that includes both the gralloc and libGLES commands together?

Thanks for your help!


All times are GMT -4. The time now is 02:46 PM.
Page 6 of 42 « First 45 6 7816 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0