Simple Guide 2012 Android on SD card! FLASH 11, 4 Steps, TP2 DL lnks (FRX07.1)

[tkedch]

Originally Posted by arrrghhh

Glad GSM is workin for you now.

Orange = full wake

Green = full sleep

On WisTilt2's test kernels, there's a third state - blinking green = wakelock present - something preventing sleep in other words. adb, gps, etc will all generate wakelocks.

So if you're always solid orange, the phone isn't sleeping - at all. Make sure GPS is disabled, and there aren't any apps running wild.

I do have a new problem now. My phone can't receive cell signal after I rebooted. The phone is showing no service. I don't know what is changed between when it worked and now. Maybe you know a fix to this if not, I can just reinstall everything again.

[arrrghhh]

Originally Posted by tkedch

I do have a new problem now. My phone can't receive cell signal after I rebooted. The phone is showing no service. I don't know what is changed between when it worked and now. Maybe you know a fix to this if not, I can just reinstall everything again.

Well there is a bug in the newer kernels that only effects CDMA devices being used as GSM.

Basically when the screen turns off, the GSM radio turns off with it. WisTilt2 has a potential fix, but I need someone to test it.

However, if the radio appears off when the screen is on? That's an entirely different issue, and I'd check the normal things we already went over...

[atrinak]

Hi all,
I was able to get the froyo full bundle on here and I'm positive my wi-fi is turned on, but when I go to settings to turn on the Wi-Fi I just get an "Error" message.Is there a special way I need to be turning on wireless through Windows? I've already tried to reboot and reset, but nothing has worked.Help,please?

[arrrghhh]

Originally Posted by atrinak

Hi all,
I was able to get the froyo full bundle on here and I'm positive my wi-fi is turned on, but when I go to settings to turn on the Wi-Fi I just get an "Error" message.Is there a special way I need to be turning on wireless through Windows? I've already tried to reboot and reset, but nothing has worked.Help,please?

What do you mean turning on wireless thru Windows...?

If you're using an ad-hoc network, I don't think Android will see them. You said you're using the Froyo full bundle, I assume FRX06 - did you change anything? There's a lot of testing stuff flying around, and while wifi should work OOB for FRX06, if you're using some testing elements that might break wifi.

There's also a few rare souls who wifi has never worked no matter what they do - and they need to hack at the wifi-nvram.txt file. We can cross that bridge when the time is right.

[solnt]

Originally Posted by arrrghhh

Well there is a bug in the newer kernels that only effects CDMA devices being used as GSM.

Basically when the screen turns off, the GSM radio turns off with it. WisTilt2 has a potential fix, but I need someone to test it.

However, if the radio appears off when the screen is on? That's an entirely different issue, and I'd check the normal things we already went over...

Hi arrrghhh
My phone is tp2 verizon, i'm using newest build 25-3 with gsm network.
- The first thing i meet is when the phone wakeup(orange led) it has signal but very weak(not in winmo with the same place), but when the phone turn into sleep mode and wake up again it show no service.
- The second thing is the battery draining quickly.
I don't know this is a bug or not.
Do you have any advice for me?
Thanks.

##Edit:
- Right now, my phone can receive signal from operator (GSM) when it wake, but when it's going to deep sleep and wake up after that, i noticed that i show "no service" and after few seconds it back to normal.
I guess that i will not receive any call or sms when it's sleep mode.
I will test with my friend and will update soon.
Thanks

[arrrghhh]

Originally Posted by solnt

Hi arrrghhh
My phone is tp2 verizon, i'm using newest build 25-3 with gsm network.
- The first thing i meet is when the phone wakeup(orange led) it has signal but very weak(not in winmo with the same place), but when the phone turn into sleep mode and wake up again it show no service.
- The second thing is the battery draining quickly.
I don't know this is a bug or not.
Do you have any advice for me?
Thanks.

##Edit:
- Right now, my phone can receive signal from operator (GSM) when it wake, but when it's going to deep sleep and wake up after that, i noticed that i show "no service" and after few seconds it back to normal.
I guess that i will not receive any call or sms when it's sleep mode.
I will test with my friend and will update soon.
Thanks

Use kernel 1253 to avoid this bug.

For battery draining, make sure the phone is going into deep sleep correctly (solid green LED).

[solnt]

Thanks arrrghhh,
I'm using kernel 1253 now,this but camera is not function ,
Do you know when this bug is fixed with camera.

Besides, i don't see "H/3G" icon next by signal icon and after setup an APN with GSM network it's not working either.

sol

[arrrghhh]

Originally Posted by solnt

Thanks arrrghhh,
I'm using kernel 1253 now,this but camera is not function ,
Do you know when this bug is fixed with camera.

Besides, i don't see "H/3G" icon next by signal icon and after setup an APN with GSM network it's not working either.

Well yea that's the tradeoff. I think I'd rather be able to receive calls than use the camera, but pick your poison I guess. There's a really big clocks commit that somehow breaks it, and it hasn't been fixed yet in the newest kernels...

Also, you won't get an H icon without using the testing RIL, which will get merged soon to mainline.

[solnt]

Yeah, you're right.
I guess i will ignore the camera for know.
I am facing a new problem, i can't now setting up my APN.
My network is GSM , create new apn with all setting as winmo, check usb tethering
==> error: usb not connected. I cannot browser web as well.
I dont now how to check to see if the issue come from apn setting or a bug of this build.

Thanks

[arrrghhh]

Originally Posted by solnt

Yeah, you're right.
I guess i will ignore the camera for know.
I am facing a new problem, i can't now setting up my APN.
My network is GSM , create new apn with all setting as winmo, check usb tethering
==> error: usb not connected. I cannot browser web as well.
I dont now how to check to see if the issue come from apn setting or a bug of this build.

Thanks

I'm confused by your comment. USB tethering doesn't work, at least not the build-in one.

For the APN to get saved, you have to enter in all the values correctly for your carrier - otherwise the APN will be ignored.