Android/Linux for CDMA Touch Pro 2 Rhodium Updated 5-20-2010

[clifftrue]

Originally Posted by 3volution

That didn't work either,guess I'll try everything on root of SD?
how frustrating,i see all you using Android & I can't for life of me get it going.


Nothing i try works,anyone out there with Us cellular & able to get Android running?
PLEASE advice.

The best sense build you should use would be the one from 5/4/10. If you put all the files from the sense build in the root of the SD it may not load due to the fact the startup.txt file has the rel_path=andbootS statement so you should delete that from the cmdline.

Here is the link to the 5/4/10 build

Sense05-04-10.zip

The first time it boots it should scroll through a bunch of text, then show a black screen for a while, next the Klinux screen will show the hero screen then the htc screen for a while. Then the interface will start to load. This usually will take 20 minutes the first time. Being patient is critical for this to load. This includes each step after it boots in to android. After it is all setup I would hold the hangup button until the menu shows to power off then say OK to reboot. Now launch haret.exe again this time it will run smoother.

Other things to make sure to try.

1. Try a different MicroSD card
2. Make sure the MicroSD card is at least 1GB
3. Make sure there is not a SIM card inserted. (I know USCC does not have them in there normally)
4. Make sure the andbootS folder is on the root of the SD card (eg E:\andbootS\) and the files are in this folder

Good luck

[3volution]

Originally Posted by clifftrue

The best sense build you should use would be the one from 5/4/10. If you put all the files from the sense build in the root of the SD it may not load due to the fact the startup.txt file has the rel_path=andbootS statement so you should delete that from the cmdline.

Here is the link to the 5/4/10 build

Sense05-04-10.zip

The first time it boots it should scroll through a bunch of text, then show a black screen for a while, next the Klinux screen will show the hero screen then the htc screen for a while. Then the interface will start to load. This usually will take 20 minutes the first time. Being patient is critical for this to load. This includes each step after it boots in to android. After it is all setup I would hold the hangup button until the menu shows to power off then say OK to reboot. Now launch haret.exe again this time it will run smoother.

Other things to make sure to try.

1. Try a different MicroSD card
2. Make sure the MicroSD card is at least 1GB
3. Make sure there is not a SIM card inserted. (I know USCC does not have them in there normally)
4. Make sure the andbootS folder is on the root of the SD card (eg E:\andbootS\) and the files are in this folder

Good luck

Hey thanks allot for the reply.That was the build I tried but wasn't aware of issue with txt file.I'll try that.
Do both the initrd & modules-2.6.27.46-01079-g8dfd613.tar files need to be unzipped as well?
Or they stay left alone?

[mikelittle24]

Originally Posted by 3volution

Hey thanks allot for the reply.That was the build i tried but i noticed theres NO startup.txt file that came with it?
Do both the initrd & modules-2.6.27.46-01079-g8dfd613.tar files need to be unzipped as well?
Where is the txt file you mentioned?

Read the first post...
Do not unzip either of those, rename the intrd.xxxx.gz file to initrd.gz and copy the modules file as is to the root of your SD card (or into whatever folder you have the android set to boot into).
The startup.txt can be found attached to post #1.