Android/Linux for CDMA Touch Pro 2 Rhodium Updated 5-20-2010

[clifftrue]

Originally Posted by ghlenz

Cliff, I also am from Iowa on USCellular with a TP2. I have tried two different builds of your Sense all in ones and I cannot get a complete boot. I get to the point where the screen says: KLINUX and HTC. Then the dude will pop up a couple times. This screen stays on for about a minute and then starts over. What am I missing? Thanks in advance.

I have been having the same problem on my Touch Pro with the newest builds. I will test on my TP2 then post my results.

[clifftrue]

Here is the updated Sense UI all in one build. Testing on mine has the WiFi and GPS coexisting. This has the updated roofs.img and zImage and modules all dated 5/14/2010. There is a new rootfs.img since I uploaded this, so let me know how this build works.

Sense05-14-10.zip

This file unzips in to an 'andbootS' folder. So just unzip in to the root of your MicroSD card. If you want to run it with all the files in the root or in a different folder you must change to startup.txt file and remove or edit the rel_path line.

Keep in mind that this build takes much longer than the AOSP builds on the first boot and subsequent boots. Patience is your best friend on the first boot. If you see any force closes with to option to wait then select wait.

As always, please read the first page of this thread before posting questions.

[hoihtah]

Originally Posted by clifftrue

Here is the updated Sense UI all in one build. Testing on mine has the WiFi and GPS coexisting. This has the updated roofs.img and zImage and modules all dated 5/14/2010. There is a new rootfs.img since I uploaded this, so let me know how this build works.

Sense05-14-10.zip

This file unzips in to an 'andbootS' folder. So just unzip in to the root of your MicroSD card. If you want to run it with all the files in the root or in a different folder you must change to startup.txt file and remove or edit the rel_path line.

Keep in mind that this build takes much longer than the AOSP builds on the first boot and subsequent boots. Patience is your best friend on the first boot. If you see any force closes with to option to wait then select wait.

As always, please read the first page of this thread before posting questions.

upon visiting the market, the screen went back to that HTC / Hero display.
It rebooted... but not all the way back to WinMO.
I suppose the SENSE part restarted.

[darrellgibson]

Originally Posted by clifftrue

I have been having the same problem on my Touch Pro with the newest builds. I will test on my TP2 then post my results.

I am having the same problem on my TP2 from Sprint. I've tried the builds from 5/13 and 5/14 several times. I've redownloaded them and re-copied them to my SD card several times. I even cleaned off all of the Android stuff from my card then defragged it. I still get stuck in a loop ending at the KLINUX and HTC screen. It then reboots and comes up to the KLINUX and Hero screen, the little green guy peaks around the letters and then it goes to the HTC screen for a minute or two before another reboot. I left it alone in the cycle for about 30 minutes before I gave up and started trying other things. I' just got my TP2 and I'd love to make it a dual boot phone, but since I'm a noob, I just have to patiently wait for the gurus to resolve this. You guys totall rock! =D>=D>

FYI, I've tried all of Cliff's versions - 5-12 through 5-14 and the result is the same for the TP2. It gets stuck in a reboot loop as described above.

[phatboy29m]

I had this problem as well. What I did to get it to work was to delete the extra Startup.txt that was on the root of my SD card from a prior installation of Android. I hope this helps you.

Originally Posted by darrellgibson

I am having the same problem on my TP2 from Sprint. I've tried the builds from 5/13 and 5/14 several times. I've redownloaded them and re-copied them to my SD card several times. I even cleaned off all of the Android stuff from my card then defragged it. I still get stuck in a loop ending at the KLINUX and HTC screen. It then reboots and comes up to the KLINUX and Hero screen, the little green guy peaks around the letters and then it goes to the HTC screen for a minute or two before another reboot. I left it alone in the cycle for about 30 minutes before I gave up and started trying other things. I' just got my TP2 and I'd love to make it a dual boot phone, but since I'm a noob, I just have to patiently wait for the gurus to resolve this. You guys totall rock! =D>=D>

FYI, I've tried all of Cliff's versions - 5-12 through 5-14 and the result is the same for the TP2. It gets stuck in a reboot loop as described above.