PPCGeeks
Page 239 of 347 « First 139189229237238 239 240241249289339 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Android On TP2 (http://forum.ppcgeeks.com/forumdisplay.php?f=179)
-   -   [CAB] GSM&CDMA Project Android Port and Startup Utility [01/23] FRX04 Reference! (http://forum.ppcgeeks.com/showthread.php?t=114400)

evoodoo 10-12-2010 01:19 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 
My rhod500 (verizon - running on gsm network) just hangs during the android boot (I've triple checked that I am not overclocking in windows).

It stops as soon as it says:
1.720001 misc_register(): OK

Only solution is to reboot the device

I've also trying formatting my sd card and doing a fresh install

Any help?

arrrghhh 10-12-2010 01:23 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 
Quote:
Originally Posted by Deltatristar500 (Post 1971836)
unistalled the anroid project cab and reinstalled it, when to boot and it just stayes at the linux boot screen with the scrolling text what seems to be forever...I just give up and go back to windows for the time being, but dont understand why with my older TP it did not take that much time to boot into android, but with my TP2, it just hangs and hangs...it does not freeze, but the scrolling just does not seem to stop and I cant make out what its saying.
Format your card, try the rar install.

rhyler 10-12-2010 01:56 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 
This project has come so far and cant get enough of it. However, I'm still getting the in call issue that others have reported. I'm on the 10/10 update and have seen it for the last few updates after they enabled the adjustment of in call volume. I'll either hear the caller and they cant hear me, or when I try to adjust the volume of the call, the phone will lock up and android will reboot, but the call will stay active through most of the reload of android. This all seems to be random and not on every call, but I can reproduce the issue most of the time by calling into voice mail and change the volume up and down a bunch. Sprint RHOD 400

Thanks again to all the work on this! It's has been fun to watch it grow.

nkdevelopment 10-12-2010 02:32 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 
I feel like I have been searching for a while with no luck so I am going to ask. My GPS is not working. I don't even know what to start with so I am hoping that someone would be willing to help me figure this out.

bdurst08 10-12-2010 02:42 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 
Hey guys. I have been keeping up with this thread for a while now.
I think i have a dumb question however with this newest release. I saw the newest release and read about 25 page after it was released. i saw that Reed was saying to use the update tool. So I did, not when i boot it goes through like normal and when It gets done it set up for about 5 seconds and then reboots. I thought i noticed that i saw people having the same problem but i havent been able to find out ther solution.
Also i usually DL from Reefer's site and tyhe version that he has up is the 9/28. is the only way to get the newest from the update app?

arrrghhh 10-12-2010 02:53 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 
Quote:
Originally Posted by bdurst08 (Post 1971961)
Hey guys. I have been keeping up with this thread for a while now.
I think i have a dumb question however with this newest release. I saw the newest release and read about 25 page after it was released. i saw that Reed was saying to use the update tool. So I did, not when i boot it goes through like normal and when It gets done it set up for about 5 seconds and then reboots. I thought i noticed that i saw people having the same problem but i havent been able to find out ther solution.
Also i usually DL from Reefer's site and tyhe version that he has up is the 9/28. is the only way to get the newest from the update app?
Oh no. Use the autobuild service if you want the newest kernels (zImages/modules) without the update tool.

Quote:
Originally Posted by nkdevelopment (Post 1971944)
I feel like I have been searching for a while with no luck so I am going to ask. My GPS is not working. I don't even know what to start with so I am hoping that someone would be willing to help me figure this out.
Do you have GPS enabled in the "Location & security"...?

Quote:
Originally Posted by rhyler (Post 1971908)
This project has come so far and cant get enough of it. However, I'm still getting the in call issue that others have reported. I'm on the 10/10 update and have seen it for the last few updates after they enabled the adjustment of in call volume. I'll either hear the caller and they cant hear me, or when I try to adjust the volume of the call, the phone will lock up and android will reboot, but the call will stay active through most of the reload of android. This all seems to be random and not on every call, but I can reproduce the issue most of the time by calling into voice mail and change the volume up and down a bunch. Sprint RHOD 400

Thanks again to all the work on this! It's has been fun to watch it grow.
Hrm, I have the same device and haven't had the issue. Are you overclocked? Running Haret or the update utility? I wonder what the difference between my setup & your setup is...

bdurst08 10-12-2010 03:48 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 
Which ones do i DL in order to get the right kernals etc? Thanks and thanked!

arrrghhh 10-12-2010 04:09 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 
Quote:
Originally Posted by bdurst08 (Post 1972013)
Which ones do i DL in order to get the right kernals etc? Thanks and thanked!
Well, if you want the newest kernel... grab the newest. If you're having issues with the newest kernel, grab one that's a little bit older ;)

bdurst08 10-12-2010 04:17 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 
Quote:
Originally Posted by arrrghhh (Post 1972044)
Well, if you want the newest kernel... grab the newest. If you're having issues with the newest kernel, grab one that's a little bit older ;)
Thanks, I am looking for the one with the battery and mic fix...I also noticed that when i boot over that no matter how full my battery is it shows that i have only like 10% left when it get over to Android.

beathookup 10-12-2010 05:52 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 
I have been using the newest 10/10 update and am seeing that everytime I try to download something from the marketplace it never fully processes. I know with the new update tool it fixed alot of glithces from previous updates but am not sure what I am doing wrong? I have tried rebooting back into Android after a soft reset with still no luck


All times are GMT -4. The time now is 04:37 AM.
Page 239 of 347 « First 139189229237238 239 240241249289339 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0