PPCGeeks
Page 132 of 347 « First 3282122130131 132 133134142182232 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Android On TP2 (http://forum.ppcgeeks.com/forumdisplay.php?f=179)
-   -   [CAB] GSM&CDMA Project Android Port and Startup Utility [01/23] FRX04 Reference! (http://forum.ppcgeeks.com/showthread.php?t=114400)

bdurst08 08-31-2010 01:56 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 
Quote:
Originally Posted by manekineko (Post 1930131)
You overclocked? Sounds unstable.
No I am not. I was before, then realised thats why i was not able to boot into android. So i haven't been overclocking since I started using android.

InvincibleLiving 08-31-2010 02:06 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 
Quote:
Originally Posted by milkycoins (Post 1930104)
Its been a while since I have ran android on my phone and with all the new fixes coming out I wanted to give it another try.

I use to be able to run android on my phone with the old builds and installed the new one the exact same way as i use to...

However, I am getting No Service and cant seem to find a way to fix that in order to fully use the phone. I am using a Sprint TP2 and if anyone could help me that would be great.

Thanks!
Sim card out is usually the quickest fix.... have you tried this?

InvincibleLiving 08-31-2010 02:09 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 
Quote:
Originally Posted by bdurst08 (Post 1930114)
So I am having a problem booting into the new version. i was using the last version w/ no sound w/o any problems and since i replaced the rootsf, modules, and zimage i always get stuckin the boot mode (where the lines of data are shown). it gets stuck in a different part everytime. So far I have only been able to boot successfully into android once.

Any reason that I could be having this problem?

Thanks guys!!
check your startup.txt first. If you have a backed up copy that worked well before be sure to copy it just in case...

manekineko 08-31-2010 02:34 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 
Quote:
Originally Posted by bdurst08 (Post 1930197)
No I am not. I was before, then realised thats why i was not able to boot into android. So i haven't been overclocking since I started using android.
I meant is your startup.txt overclocked. There's a line in there that overclocks Android.

bdurst08 08-31-2010 03:37 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 
Quote:
Originally Posted by InvincibleLiving (Post 1930231)
check your startup.txt first. If you have a backed up copy that worked well before be sure to copy it just in case...
I dont have a working copy. neer thought to save one that worked before i upgraded the new info. I guess i will have to make one. Thanks and thanked
Quote:
Originally Posted by manekineko (Post 1930297)
I meant is your startup.txt overclocked. There's a line in there that overclocks Android.
Oh, not sure. I will have to look. I did get it to finally boot again about an hour ago. I will have to play with it some more when my battery is charged again. thanks and thanked.
Edit; I checked my start up text and there is no line for OC in there. So I am not sreu whats causing it to hang up on boot.

milkycoins 08-31-2010 03:55 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 
Quote:
Originally Posted by InvincibleLiving (Post 1930224)
Sim card out is usually the quickest fix.... have you tried this?
Yes, sim card is out but still getting No Service

milkycoins 08-31-2010 03:59 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 
Quote:
Originally Posted by manekineko (Post 1930127)
Did you set the Sprint settings in your startup.txt? You have to enable data.

If you don't want to modify it yourself, somebody posted their working startup in other thread.
http://forum.ppcgeeks.com/showpost.p...8&postcount=13
No I did not set the Sprint settings, what do I have to enter or change?

Any help would be great. Thanks again

Lmiller1708 08-31-2010 04:00 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 
Quote:
Originally Posted by milkycoins (Post 1930428)
Yes, sim card is out but still getting No Service
Make sure your startup.txt or default.txt (which ever one you use) is set to htc_hw.force_cdma=1.
Then before you boot to Android make sure you have a active internet connection. I do this by opening Internet explorer... But sometimes I don't catch it quick enough and I have to do it twice... :(

Good luck.
P.S,
I don't have my sim card removed either... :silent:

milkycoins 08-31-2010 04:05 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 
Quote:
Originally Posted by Lmiller1708 (Post 1930435)
Make sure your startup.txt or default.txt (which ever one you use) is set to htc_hw.force_cdma=1.
Then before you boot to Android make sure you have a active internet connection. I do this by opening Internet explorer... But sometimes I don't catch it quick enough and I have to do it twice... :(

Good luck.
P.S,
I don't have my sim card removed either... :silent:
I appreciate it, I will try this when I get home

ModmyPPC 08-31-2010 04:49 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 
Milkeycoins I see your on sprint too

Go here and replace your startup.txt in your andboot with this one. http://forum.ppcgeeks.com/showpost.p...84&postcount=9

To get data go to Settings>wireless & networks>Mobile networks> select data enabled.


All times are GMT -4. The time now is 07:19 PM.
Page 132 of 347 « First 3282122130131 132 133134142182232 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0