[TESTING] - NAND OMGB (1.2.3)

[arrrghhh]

Originally Posted by milda25

I have registered on ppcgeeks, even if my mainly communication is on XDA because this is interesting info. I'm one of bunch of rhod100 users who has NO SERVICE on GSM. So, are you sure that the only one change on your installation was this parameter ro.telephony.default_network = 1 in built.prop? I didn't tried yet, but I think, that is not the reason of connecting to network/no service. Other non-NAND builds (e.g. FRX7.1) has this parametr set on 0 (same as original build OMGB). I think this is only default value which use the phone after boot. This value may be changed in Settings-Wirelles&Network-Mobile network-Network type I think. So, from my point of view mainly problem is NO SERVICE

Can you at least try it...? ACL and I are in the dark here, we don't have GSM service, or RHOD100's. So we're leaning heavily on you folks to sort this out... Thanks.

[milda25]

Originally Posted by arrrghhh

Can you at least try it...? ACL and I are in the dark here, we don't have GSM service, or RHOD100's. So we're leaning heavily on you folks to sort this out... Thanks.

I tried set the parameter ro.telephony.default_network on value 1 and:
1) using task 29 clean my phone (Extra Lite Energy Rom + FRX7.1 before - it's my daily phone)
2) flash rhodimg.nbh from sdcard
3) flash recovery.img using fastboot
4) install update using recovery from zip with build.prop/ro.telephony.default_network = 1 inside
5) boot into OMGB
6) reboot to recovery and install gapps
7) boot back OMGB
and ....
still no signal
Logs are probably useless, correct?

[arrrghhh]

Originally Posted by milda25

I tried set the parameter ro.telephony.default_network on value 1 and:
1) using task 29 clean my phone (Extra Lite Energy Rom + FRX7.1 before - it's my daily phone)
2) flash rhodimg.nbh from sdcard
3) flash recovery.img using fastboot
4) install update using recovery from zip with build.prop/ro.telephony.default_network = 1 inside
5) boot into OMGB
6) reboot to recovery and install gapps
7) boot back OMGB
and ....
still no signal
Logs are probably useless, correct?

I don't get why some are working great and others not at all.

I would think the APN configuration would only apply to data/MMS, but have you configured an APN for your provider?

[milda25]

Originally Posted by arrrghhh

I don't get why some are working great and others not at all.

I would think the APN configuration would only apply to data/MMS, but have you configured an APN for your provider?

Yes, my APNs are configurated automatically and correct, but of course - no data Automatic time providing network is also functional.
Now I tried SIM card from my wife, she using Vodafone, but same result - APNs were configurated, timesynchro OK, but no signal

[[ACL]]

Originally Posted by milda25

Yes, my APNs are configurated automatically and correct, but of course - no data Automatic time providing network is also functional.
Now I tried SIM card from my wife, she using Vodafone, but same result - APNs were configurated, timesynchro OK, but no signal

i have no gsm service so i cant diagnose of fix this. I guess we will need to compare the rhod100 successful radio logs vs the unsuccessful logs.

[milda25]

Originally Posted by [ACL]

i have no gsm service so i cant diagnose of fix this. I guess we will need to compare the rhod100 successful radio logs vs the unsuccessful logs.

Understand, it's hard to find the issue. May I send some actuall logs or have you any older from me posted on XDA? Reference logs with success connect to network could be from Starling100, correct?

[milda25]

One finding: As I already wrote I have no signal on my Rhod100, but some registration to network is done (autoconfig APN and so on). Now I'm found during my play with OMGB without signal I have incomming call from my wife (oops ). In her phone she heared that my phone is inaccessibilited. In our country operator (provider) always sending SMS about missed call if the called phone is off (power off/out of signal). In this case no SMS about missed call has been send. It probably means, that my operator think I'm online, even if I'm not. May be help you ...