[TESTING] - NAND OMGB (1.2.3)

[[ACL]]

Originally Posted by kylanschilling

i can test anyhting for you ACL with my sim

Do it up. Download the latest and see if we can get your gsm up. We may need to do some manual setprops but easy

[kylanschilling]

Originally Posted by [ACL]

Do it up. Download the latest and see if we can get your gsm up. We may need to do some manual setprops but easy

i already tried. it keeps switching back to cdma. i didnt say anyhting cause i thought you knew that

[[ACL]]

Originally Posted by kylanschilling

i already tried. it keeps switching back to cdma. i didnt say anyhting cause i thought you knew that

read muzlings post a page back or so. Looks like you need to setprop something

Edit : Also i realized when you go to settings>wifi & networks > mobile networks > Network mode and select Global, it sticks and does read some crap. So can you try that ?

[kylanschilling]

Originally Posted by [ACL]

read muzlings post a page back or so. Looks like you need to setprop something

Edit : Also i realized when you go to settings>wifi & networks > mobile networks > Network mode and select Global, it sticks and does read some crap. So can you try that ?

sorry not sure what you/he means. you mean change the ro.telephony in build.prop?

[muziling]

Originally Posted by kylanschilling

sorry not sure what you/he means. you mean change the ro.telephony in build.prop?

Try this ril.so, then modify build.prop, edit ro.telephony.default_network=0(default is zero), reboot OMGB, if still not GSM signal, dial *#*#4636#*#* to select GSM network.

[kylanschilling]

Originally Posted by muziling

Try this ril.so, then modify build.prop, edit ro.telephony.default_network=0(default is zero), reboot OMGB, if still not GSM signal, dial *#*#4636#*#* to select GSM network.

kk doing so now.

my phone can only do 2g im missing the 3g band. should use use telephony #1?

[muziling]

Originally Posted by kylanschilling

kk doing so now.

my phone can only do 2g im missing the 3g band. should use use telephony #1?

I am not sure, you can use any value except 4, I define 4 to CDMA service.

[kylanschilling]

WOOOHOOO

SERVICE!

just the change in build.prop did it along with the libhtc file. on first boot connected to my carrier and i have service

[kylanschilling]

i can still switch to cdma service also if it matters. i dont have cdma service but its still tied to my old carrier and i get the message saying its not active

should i try the libhtc without a change to my build.prob to see if that matters?