[NAND ROM] - Rom Dev only - Page 4

**natemcnutty** · #31 (**permalink**) 02-20-2011, 01:52 PM

Just as a heads up, the NBH's don't work for me using the rhod_layout partition table, but if I use the old method, it boots right up. I've tested this with the latest initrd.gz and zImage. I'll try hex-editing ACL or LMiller's NBH to change the partition to the same as the previous one was and see if I have the same results.

Unfortunately, if I change to the old partition layout, it says it can't find the root partition. Perhaps that needs to be added back into the init for initrd? I'll play with that later today as well.

MassStash · #32 (**permalink**) 02-20-2011, 02:29 PM

which androidupdate yesterday?

**arrrghhh** · #33 (**permalink**) 02-20-2011, 02:49 PM

Quote:

Originally Posted by MassStash

which androidupdate yesterday?

Still doesn't work bro. We'll sort it out.

**[ACL]** · #34 (**permalink**) 02-20-2011, 02:54 PM

Quote:

Originally Posted by Lmiller1708

Guys Try using this NBH... Use the same androidupdate.tar I gave you yesterday.

I added Rhod500 back in because it looks like this line needs it at the $1:

$TOOLCHAIN_PATH-as tinboot/tinboot2.S -o tinboot.o --defsym $1=1 --defsym MTYPE=2292 --defsym hw3d=1

Not sure if it will work or not... But It's worth a try.
It's just really weird that it worked just fine for me and ACL but no one else. (Or we have really special phones

)

Sounds like it doesn't matter how you flash it either.

Good luck!

well our phones have been wiped many times already ..lol.. probably got used to it. Sounds like Nate is up to something so let see his results.

**[ACL]** · #35 (**permalink**) 02-20-2011, 02:56 PM

Quote:

Originally Posted by arrrghhh

Still doesn't work bro. We'll sort it out.

maybe try a good ol fashioned task 29 or whatever task wipes everything ?

Just tried again on my second rhod. Works like a charm .. So something is messing up your flash. Bad sd ? possible bad blocks on nand?

time for some mtty ?

**Lmiller1708** · #36 (**permalink**) 02-20-2011, 02:56 PM

Quote:

Originally Posted by [ACL]

well our phones have been wiped many times already ..lol.. probably got used to it. Sounds like Nate is up to something so let see his results.

Yup!

Hopefully he finds something. Working with arrrghhh on Xdandroid chat now. Trying a couple of things... But so far not working.

**arrrghhh** · #37 (**permalink**) 02-20-2011, 02:58 PM

Task29 is on the list, it's been a while since I've done one of those...

I also have a couple of other SD's, but honestly it doesn't seem to be making it to that stage... I could be wrong tho. If the task29 doesn't do anything, another SD is on the list.

Thanks for the help, we'll figure this out...

Task29, 3 different SD cards... Still status quo. Not sure what's up with this...

MassStash · #38 (**permalink**) 02-20-2011, 03:13 PM

it was working before with your compiles argh, i dont think its card. we need something from nate to try, like the no rhod_payload to see if we can just get to that stage with our particular phone....

**arrrghhh** · #39 (**permalink**) 02-20-2011, 03:52 PM

Well, we found that I was able to flash the old image that blew up data on every reboot... but when I tried to flash with the new table it fails... just hangs at the initial boot screen.

Seems it is that new table...

**Lmiller1708** · #40 (**permalink**) 02-20-2011, 03:54 PM

Quote:

Originally Posted by arrrghhh

Well, we found that I was able to flash the old image that blew up data on every reboot... but when I tried to flash with the new table it fails... just hangs at the initial boot screen.

Seems it is that new table...

I will have a look at the new table tomorrow and hopefully have something for you guys to test tomorrow!