Originally Posted by n1nj4Lo (Post 2057044)

Yea I've got 2 and a half or 3 Gb's left on a 16Gb microSD? Is the 1258 posted in the main thread or included in the folder?

Originally Posted by hammester (Post 2057057)

It is a buffer I/O error on dev mmcblk0. I get a bunch of those and then it stops loading with a message that says failed to mount the sd card, cannot continue. /bin/sh: can't access tty; job control turned off.

This is even after I re downloaded and re formatted my sd card.

Originally Posted by cganesh75 (Post 2057043)

i had the same issue. it was complaining some MDP_BUSY or whatever and also something that ended with "4 out of 4 times" or something. went back to tiads version and it works. both of them after a clean format of the 8gb sd card

Originally Posted by arrrghhh (Post 2057061)

I guess I should redo this build with 1258 to avoid SD card issues.

The autobuild link is in the first post, I posted the link to 1258, but here it is again...

Kernel 1258.

I'm betting that'll resolve your issues.



That error can be ignored, and is not the root cause. Are you using the same kernel in tiad's version? I'm not going to fight for users, but if you want to use this build I am here to help.

I would encourage you to try 1258 as well.

I'm not sure if I want to redo the bundle yet, as it seems there'll be another new kernel soon as well - I don't want to redo the bundle every day ;).

Originally Posted by arrrghhh (Post 2057061)

I guess I should redo this build with 1258 to avoid SD card issues.

The autobuild link is in the first post, I posted the link to 1258, but here it is again...

Kernel 1258.

I'm betting that'll resolve your issues.



That error can be ignored, and is not the root cause. Are you using the same kernel in tiad's version? I'm not going to fight for users, but if you want to use this build I am here to help.

I would encourage you to try 1258 as well.

I'm not sure if I want to redo the bundle yet, as it seems there'll be another new kernel soon as well - I don't want to redo the bundle every day ;).

Originally Posted by hammester (Post 2057068)

Sorry I am a complete Noob. What do we do with the 1258 kernel?

Originally Posted by n1nj4Lo (Post 2057070)

Quick dumb question, total XDAndroid newb here, how do I update with that image, do I unzip it or just drag "htc-msm-linux-20110214_200559-package.tar.bz2" file directly into the same root directory... Or what exactly...

Once I figure that out then I'm back off to bios bootland again, with crossed fingers. LoL

Originally Posted by arrrghhh

If you have any issues with the kernel, feel free to change it:
There are some devices that are having issues with the newest kernels. Please see the kernel autobuild service to get archived kernels. Once you download a replacement kernel, go to where you run haret.exe from - remove your old zImage/modules-xxxxx.tar.gz. Take the new zImage/modules-xxxxx.tar.gz and replace the old ones, same folder - where you run haret.exe from. Make sure the ‘zImage’ is named just that. Do not rename the modules file, do not extract it - should be in .tar.gz format.

Originally Posted by n1nj4Lo (Post 2057082)

Still getting the rdm busy message... Grrrr! I want this to work.
http://www.realpics.net/emotes/banghead.gif

I removed the old files then copied the two new ones over and made sure to make the zImage one just that name.
_

It's odd that it worked one time and got to the boot screen and now I can't get it to do that at all again, I think it was sitting there for 45mins or so. LoL

Originally Posted by n1nj4Lo (Post 2056975)

I tried the cab and installed both NET Core and Net Frameworks 3.7, but the bootup screen stales and doesn't do anything right away... I installed everything to (Except for Net Core and Net Frameworks 3.7) the storage card and see it all there in andboot... I have the T7380 with the sim card taken out. I left it sitting there for almost an hour and cameback to a flashing XDANDROID screen with the animated logo.. Nothing would wake from that screen and I had to reset my device I'm using BLAZN...

Do I need to install Net Core and Net Frameworks 3.7 to the storage card, also am I selecting the right model Rhod400 for Sprint Touch Pro2 World Phone (T7380) plus Gen Y Boot says Android Missing every time I boot and it loads the screen.
_

This new zip file do I need to extract it all onto my storage card no folder or extract it all to a folder on the storage card called XDANDROID or whatever?

Can someone please help!

Originally Posted by MassStash (Post 2057097)

This is the froyo frx04 thread, not the BLAZN last year thread brudda... hopefully your not useing the kernel from BLAZN too.... haha

frx04 1258

Originally Posted by ndno (Post 2057098)

LOL, now that this has become a stickie, lots of work for you arrrghhh answering everyone's questions... :wink: Hope that FAQ is coming up soon. Haven't had time to play with the new 1258 kernel yet. I guess the official changelog is listed somewhere on XDA; can't find it on the XDAndroid site.

Originally Posted by n1nj4Lo (Post 2057104)

It's just like it is on my pc

FRX04 (Folder)
AndroidAps (Folder inside FRX04)
conf (Folder inside FRX04)
media (Folder inside FRX04)
STARTUPS (Folder inside FRX04) except for > Rhodium/RHO400 startup.txt it's in the FRX04 root
haret.exe (inside FRX04 no sub directory folder)
initrd.gz (inside FRX04 no sub directory folder)
modules-2.6.27.46-01253-gd53ddf6.tar.gz (inside FRX04 no sub directory folder)
rootfs.img (inside FRX04 no sub directory folder)
system ext2 (inside FRX04 no sub directory folder)
zImage (inside FRX04 no sub directory folder)