NAND Testing - 05-25 Update: New LK, Recovery.img, Kernel Updates through Recovery - Page 78

lemeiux1 · #**771** (**permalink**) 12-29-2010, 09:31 PM

ok running the full package from the first post (thanks Nate) and was just wondering since I've seen a lot of talk about rhod 400/500 panel working correctly, is it odd that my rhod400 panel doesnt power off? or is it still just hit or miss as far as which phones it works for?

**natemcnutty** · #**772** (**permalink**) 12-29-2010, 09:54 PM

Quote:

Originally Posted by lemeiux1

ok running the full package from the first post (thanks Nate) and was just wondering since I've seen a lot of talk about rhod 400/500 panel working correctly, is it odd that my rhod400 panel doesnt power off? or is it still just hit or miss as far as which phones it works for?

The full panel power on/off is in newer kernels than what I included in the full package. I used the 11/29 for the full package because the panel init builds haven't been as stable or worked for as many people. I figured I would build a new package once the panel init stuff is ironed out.

If you would like to update to the latest (very experimental) kernel, just download the 12/29 zip under NBH/modules on the first post

MassStash · #**773** (**permalink**) 12-29-2010, 10:04 PM

wow, so seems as of now we're completely screwed with the sense ui... blast, all i really "need" from it is the fb contact sync n ez upload pics i guess...

I think i'm stay in smoke, drank, n just wait for any commits haha

**[ACL]** · #**774** (**permalink**) 12-30-2010, 12:41 PM

Nate: i commited some changes last night. Unfortunately i passed out while writing the sharp panel portion for the 0x13 id. But should be done tonight so those poor rhod100 folk can help test.

Since camera is around the corner i guess i will begin concentrating on true nand next. I wish we had a winmo chef since they would know how wince handles all that stuff. Once we have that figured out its just a matter of filling in tinboot with the necessary info.

lemeiux1 · #**775** (**permalink**) 12-30-2010, 01:23 PM

Quote:

Originally Posted by natemcnutty

The full panel power on/off is in newer kernels than what I included in the full package. I used the 11/29 for the full package because the panel init builds haven't been as stable or worked for as many people. I figured I would build a new package once the panel init stuff is ironed out.

If you would like to update to the latest (very experimental) kernel, just download the 12/29 zip under NBH/modules on the first post

ok Nate I tried the 12-29 like you said and had some flickering once the xdandroid boot screen came up and had to tap the end key a few times until the screen did stay on. But good news is the panel off does work correctly for me now, unfortunately everything is VERY slow, but I'll keep messing with it

thanks!

MassStash · #**776** (**permalink**) 12-30-2010, 01:59 PM

Quote:

Originally Posted by [ACL]

Nate: i commited some changes last night. Unfortunately i passed out while writing the sharp panel portion for the 0x13 id. But should be done tonight so those poor rhod100 folk can help test.

Since camera is around the corner i guess i will begin concentrating on true nand next. I wish we had a winmo chef since they would know how wince handles all that stuff. Once we have that figured out its just a matter of filling in tinboot with the necessary info.

i tweeted this post to NRGZ energyrom dude.... idk? haha

btw, Nates files from 29th are working amazing with panel, sometimes. And speed is the lotto again

lemeiux, just soft reset 3 more times

Booting mods n kernel 01224 right now....

lemeiux1 · #**777** (**permalink**) 12-30-2010, 02:28 PM

Quote:

Originally Posted by MassStash

i tweeted this post to NRGZ energyrom dude.... idk? haha

btw, Nates files from 29th are working amazing with panel, sometimes. And speed is the lotto again

lemeiux, just soft reset 3 more times

ok did you just switch out the modules and flash the NBH? for some reason its like always unusably slow for me. I might try and just reformat and start fresh with that package, it may be something in my data.img or something

EDIT: Nevermind it was Swype haha, I killed it and boom! everything is super snappy now thanks guys

MassStash · #**778** (**permalink**) 12-30-2010, 03:15 PM

Quote:

Originally Posted by lemeiux1

ok did you just switch out the modules and flash the NBH? for some reason its like always unusably slow for me. I might try and just reformat and start fresh with that package, it may be something in my data.img or something

EDIT: Nevermind it was Swype haha, I killed it and boom! everything is super snappy now thanks guys

lol niiiice, i haaaate when that happens

Kernel and modules 2.6.27.46-01224-gdcb0700
http://www.lantowcorporations.com/an...nd12302010.zip

**natemcnutty** · #**779** (**permalink**) 12-30-2010, 08:14 PM

Quote:

Originally Posted by [ACL]

Nate: i commited some changes last night. Unfortunately i passed out while writing the sharp panel portion for the 0x13 id. But should be done tonight so those poor rhod100 folk can help test.

Since camera is around the corner i guess i will begin concentrating on true nand next. I wish we had a winmo chef since they would know how wince handles all that stuff. Once we have that figured out its just a matter of filling in tinboot with the necessary info.

I saw the commits. You had a busy night! F22 reminded me to think Hex cause I gave you the wrong vendor for 0x13. It should have been AUO since 0x13 is 19.

I'm compiling two versions right now. One will be the reference where I leave force_cdma=1, no overclock, and have pm.sleep_mode=1. I'm also going to do an experimental version where I removed force_cdma=1, set an overclock to 710 MHz, set pm.sleep_mode=1, and moved the relative path to the root of the SD card. This will be a good test to see if my auto-detect CDMA/GSM works and see if removing the parsing of the andboot folder actually does help performance as we've seen in some of the HW3D threads.

tpdjr · #**780** (**permalink**) 12-30-2010, 08:28 PM

Quote:

Originally Posted by natemcnutty

I saw the commits. You had a busy night! F22 reminded me to think Hex cause I gave you the wrong vendor for 0x13. It should have been AUO since 0x13 is 19.

I'm compiling two versions right now. One will be the reference where I leave force_cdma=1, no overclock, and have pm.sleep_mode=1. I'm also going to do an experimental version where I removed force_cdma=1, set an overclock to 710 MHz, set pm.sleep_mode=1, and moved the relative path to the root of the SD card. This will be a good test to see if my auto-detect CDMA/GSM works and see if removing the parsing of the andboot folder actually does help performance as we've seen in some of the HW3D threads.

Hey nate are you going to post that kernel tonight?