Re: NAND Boot Testing - 04-06: FRX06 on NAND (Testing FRX06 now!)
 

The Haret will be using the system.ext2 method while the NAND will be using a update.zip method. I'm working on having the files from the system.ext2 mounted to the sdcard and then copy them to NAND like before. Hopefully I will have the done before the next release.

Yes we are just waiting for the FRX07 to come out before we make any changes. Maybe you should update the title of your thread to not testing anymore. Thanks for all your hard work on that by the way! :headbang:

Re: NAND Boot Testing - 04-06: FRX06 on NAND (Testing FRX06 now!)
 

Any chance that the next NAND release of FRX07 will have the recently posted BlueTooth support in it?

Re: NAND Boot Testing - 04-06: FRX06 on NAND (Testing FRX06 now!)
 

Assuming FRX07 has support for BT, yes.

Edit - I guess I shouldn't say definitively so. The support for BT is still being tested heavily, and even if it does make the haret version of FRX07, it might not make the NAND version because of all the required kernel changes.

Re: NAND Boot Testing - 04-06: FRX06 on NAND (Testing FRX06 now!)
 

Ok, im sure Nate or lmiller will do a better write up but i promised to post something so here it is.

Latest LK files

Index of /files/LK/

Note there are 2. One is pure LK the other one is LK with recovery already on it (i recommend this one for the average joe). Once you have LK you need you will need to download frx6 from

http://htcdevs.wirelesstcp.net/files...RX6/update.zip

Then download the latest kernels .

Index of /files/rhodium_nand/

Ok so the process is really simple. If you flashed LK with recovery, simply hold down the power button as LK comes up to boot into recovery. Once you are in there, you can apply update.zip (frx6 first) then the kernel update.zip and you are done. So each time we have a new kernel, do it using the recovery that way and you will be set.

here is a short video how

http://www.youtube.com/watch?v=4r4o2CCKwvU

Re: NAND Boot Testing - 04-06: FRX06 on NAND (Testing FRX06 now!)
 

But we are not boot into recovery, just stop at "fastboot: processing commands", althought hold the power button.

Re: NAND Boot Testing - 04-06: FRX06 on NAND (Testing FRX06 now!)
 

Hi ACL i tried on Rhod100_it but after blues screen rhod stope at "fastboot: processing commands"

Wirelessly posted (TP2: Mozilla/5.0 (Linux; U; Android 2.2.1; en-us; pcdadr6350 Build/FRG83D) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1)

The recovery NBH will not work with GSM models. Needs different mtdparts.

Do you guys prefer to have the recovery built right in? The only problem with that is we are going to need a flash when the recovery needs a update.

Re: NAND Boot Testing - 04-06: FRX06 on NAND (Testing FRX06 now!)
 

I am CDMA user , same problem.

Wirelessly posted (TP2: Mozilla/5.0 (Linux; U; Android 2.2.1; en-us; pcdadr6350 Build/FRG83D) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1)

Ok. Just make sure you press the end button once the blue screen turns on.
If that don't work for you then you will need to use the other NBH and flash the recovery.img manually. I have a "how to" on that a few posts back, same for GSM users.

Re: NAND Boot Testing - 04-06: FRX06 on NAND (Testing FRX06 now!)
 

You mean when enter blue screen, press end button once, but ACL said hold power button down when enter blue screen.

I try again now.

Not work : there is an error message "Cannot read recovery_header", I had try other recovery, the same error.