PPCGeeks
Page 185 of 274 « First 85135175183184 185 186187195235 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Android On TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=319)
-   -   NAND Testing - 05-25 Update: New LK, Recovery.img, Kernel Updates through Recovery (http://forum.ppcgeeks.com/showthread.php?t=134598)

[ACL] 03-17-2011 05:32 PM
Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)
 
Quote:
Originally Posted by Lmiller1708 (Post 2069947)
WIFI works. Just need to make sure you have the androidupdate too. The modules need to be the same as the kernal.
maybe i effed up the autobuild. Someone mentioned the date was off in the update. The latest stuff should always match since its automated. I can re-run it if there are issues.

Lmiller1708 03-17-2011 05:34 PM
Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)
 
Quote:
Originally Posted by m4f1050 (Post 2069954)
I did install androidupdate.tgz from 3.17.11 when I reinstalled it. I even reflashed the 3.17.11 nbh just in case...instead of 3 files in andboot I had 4:

androidinstall.tgz
androidupdate.tgz
recoveryinstall.tgz
install-seq.sh
Did you do a restore of your data?

If so that is your problem.

Nate was working on a script to handle this but I'm not sure it was working just yet...

[ACL] 03-17-2011 05:41 PM
Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)
 
Quote:
Originally Posted by m4f1050 (Post 2069932)
I can confirm wifi can't scan.... here is my logcat..
when modules dont match. dmesg is more valuable than logcat. So hook me up :-)

m4f1050 03-17-2011 05:45 PM
Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)
 
Quote:
Originally Posted by Lmiller1708 (Post 2069959)
Did you do a restore of your data?

If so that is your problem.

Nate was working on a script to handle this but I'm not sure it was working just yet...

I restored data but the data I restored was after the 3.17.11 install... But yeah, I will reinstall and test wifi after fresh install (without backup & restore in the mix...)

m4f1050 03-17-2011 05:45 PM
Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)
 
2 Attachment(s)
Quote:
Originally Posted by [ACL] (Post 2069961)
when modules dont match. dmesg is more valuable than logcat. So hook me up :-)
I'll send you the logcat and dmesg after a reboot and wifi enable... I will then reinstall and try again without backup & restore...


EDIT: uploaded logs. Question, should I wait for a new install with correct dates?

[ACL] 03-17-2011 06:01 PM
Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)
 
supporting mutiple is simple

on /data/modules we need a new directory with the uname of the kernel

Each kernel will use their own directory but mutiple an co-exist in there. So when we do a backup, we will always bakup the older modules in their old directories as well as leaving the new ones untouched. The final piece is to tell android to symlink /data/modules/uname to /data/modules . The uname gets filled in with the kernel info.

Now this has to run really early, even before the sysinit.sh, so it may need to be part of the initrd . I think we even have the command in there commented out.

I'm rerunning the autobuild. Hopefully that helps.

[ACL] 03-17-2011 06:03 PM
Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)
 
Quote:
Originally Posted by m4f1050 (Post 2069966)
I'll send you the logcat and dmesg after a reboot and wifi enable... I will then reinstall and try again without backup & restore...


EDIT: uploaded logs. Question, should I wait for a new install with correct dates?
Hmm.. i need it as you are trying to enable wifi. This dmesg is too early.

But you can prob tell since it will say on dmesg modules dont match
Edit: i checked the one online and the date is correct so i dont know why these modules would be bad. But im running it anyways.

neopeek 03-17-2011 06:07 PM
Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)
 
tried it out now several times (replaced sdcard too) but still have that bootloop issue on "waiting for sdcard" with 3-17 files. Seems like I have to wait for you to fix it as it works with older files

m4f1050 03-17-2011 06:07 PM
Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)
 
Quote:
Originally Posted by [ACL] (Post 2069978)
Hmm.. i need it as you are trying to enable wifi. This dmesg is too early.

But you can prob tell since it will say on dmesg modules dont match
Edit: i checked the one online and the date is correct so i dont know why these modules would be bad. But im running it anyways.
I adb pulled that dmesg after I clicked on Wifi,waited for scan error, and saw that wifi was off... It would have the message if that was the case.

natemcnutty 03-17-2011 06:08 PM
Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)
 
Quote:
Originally Posted by m4f1050 (Post 2069966)
I'll send you the logcat and dmesg after a reboot and wifi enable... I will then reinstall and try again without backup & restore...


EDIT: uploaded logs. Question, should I wait for a new install with correct dates?
Here's your issue:

E/WifiHW ( 152): Supplicant not running, cannot connect

As for how to fix it, I think reinstalling the androidupdate.tgz should fix that.


All times are GMT -4. The time now is 05:44 PM.
Page 185 of 274 « First 85135175183184 185 186187195235 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0