[avdude]

depending on what boot loader you have loaded.. you might need to load an unloacker and change the boot loader .. Then it is just a mater of reloading the bell stock rom... I did this last night and all went well !!!

1. backup all contacts/data/etc..
2. ensure your device is connected to your pc via activesync.
3. run imcokeman 's vogue unlocker and follow ALL instructions in the command prompt exactly .
4. once you have booted back up into wm and are connected to activesync again (dont worry about setting up your device again because you're just going to flash it again and erase all that in a second anyway)
(power-camera reset) press and hold both the camera button and the power button (top), and poke the stylus into the reset hole. you should then be presented with the tricolor screen and near the top you should see something like coke 0.4.0 ( if you do not see the coke 0.4.0, then dont bother trying to flash your device. if it does not say coke 0.4.0, the device is not unlocked, and you need to start at step 3 again).

5 if you have the 0.4.0 boot loader just flash the phone with the original bell rom and all should be well..


I started with the 2.3.1 bootloader and that ended up being 0.4.0 after vogue flash which allows you to run the bell rom which will reloack phone and leave it in stock form.....


HTH ... it's how i got mine back to stock..