[ROBBLDEL]

In order to flash your xv6700 device to 3.3 using Hemi_C's file:
You cannot just run the .exe from windows without putting your phone in bootloader mode first!!!!![/
To put your 6700 in boot loader mode: Press power, record, and reset simultaneously.. the screen should go dark and say "serial" at the top.. plug in usb cord and "serial" the screen should then change to "usb".. Now you can launch the ApacheAKU3.3.exe file proceed with launching the exe file on your pc. When it is done, push the reset button and let it restart.

You Must Hard Reset After The Install Is Complete

Normal resets will only cause problems. You must hard reset. Do this by pressing both soft keys and reset at the same time. The screen should turn white and prompt you to press Y on the keyboard.


you should have no problems with the install. Once it is done, reset it a couple times (pushing the reset, boot up... then reset again)


Thanks to kayem954 for having the same problem and working out the issue.



If you didnt pay attention to this, and decided to just launce the exe without putting your phone in boot loader mode, it will error out and not install.