Well, i've been reading the forum for days triying to get service (metro pcs) on my HTC touch pro CDMA.
Now i'm in a dead end road and i don't know what to do.
I begging some help
.
Let me explain all:
First i wanted my phone be activated on the metropcs network, but i decided first to unlock my phone and flash a rom before going to the metro store, this was in case if i took my phone, do the metroflash ,unlock at home, putting a new rom and then all the metroflash settings were lost!.
Yesterday succesfully unlocked my phone using the Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team metod .
http://forum.ppcgeeks.com/showthread.php?t=42503
I choose the Raphael_CDMA_HSPL_037 for my phone, piece of cake. I double check and the phone was unlocked (in the boot screen was 0.37.CMONEX)
then i decided to install the mighty room MightyROM6_07.18.09_Herman and all were very easy and smooth.
Today i went to the metro store and ask for the metroflash service for my phone, they told me all the stuff all you ready know(no internet, no picture messages, bla,bla), i said ok no problem
(because i was reading this forum and i know it is possible).
Then they made me sign a document where states that Metro takes no responsability about
unlocking your phone and all the risks that may occur, i was thinking, well, many people at the forum have unlocked phones at metro, so i sign.
One hour later they came with my phone and then told me that their system did not allow my phone get over the metro network, and some times something like that happens. I took my phone and everything looks fine, then i think, maybe that was because my phone was already unlocked, their system didn't allow unlock again my phone. So i decided to return home, put a spring stock rom and relock the phone.
Then i decided to check the ##778# at the dial pad end enter to the edit mode, and i found the phone was locked! i put 000000 trying to unlock, no success.Check again the boot screen and the phone was unlocked (0.37.CMONEX) .So i finilly decided to put a stock rom and lock the phone.
I was looking for info for a knoob like me to put my phone back to stock. I found in the forum the StockSprintHermanOSBigstorageRUU_dumped file(
ftp://ppcgeeks.com/Raphael/Users/ImC...RUU_dumped.rar ) , extracted the file, rename it to raphimg.nbh, put it in my sd card, turn my htc touch by holding volume down and power, rom was flashed, softh reset, and everything going fine, i went tru the configuration again and everthing fine.
All looks normal with my phone, then i went with the lock metod using the Raphael_CDMA_Relocker, but then the problems started , first when i was runnig the app, i got Activesync problems, the usb conection to my phone was lost. The raphael cdma relocker went in to fix the problem: disconect the usb from my phone, unistall the battery, installed again. So i was thinking maybe the Activesync have problems, then i reinstalled the activesync in my pc.
Uff...Nothing happens, the disconection problem still there, no Activesync to my phone runing the Raphael relocker, tryed many times with no luck.
Then i choose to use a diferent lock metod: the unlock, flash and even relock your TP via the SD card! metod (
http://forum.ppcgeeks.com/showthread.php?t=61333) use the file (
http://forum.ppcgeeks.com/attachment...5&d=1245203494) , save it to my sd card, run the boot menu at my phone,and then i was feeling something was wrong,
because the loading screen was there forever and nothing happens.
Give a soft reset and this was appearing in the boot screen:
RAPH800
SLP-0.37.
0000
MicroP-Hermann(LED) V0c85
MicroP-Hermann(Key) v0685
PSOC-Raph STAGE-EVT v20
Upgrade ROM code error
please try again
Now my phone appears as Locked! and can't pass the
l o a d i n g .... screen.
Yes, i know
reading is important and i made a mistake, because there states how to lock properly :"
Relocking is actually MUCH easier than unlocking. There is really just two steps.
step 1.) Flash a stock SHIPPED rom (not dumped while a dumped rom is just the stock rom, the certificats are signes wrong and once you flash the locker it will give an invalid rom error.
step 2.) flash the relocker this again is a flash exactly like a normal rom flash. after these two steps are done, you are relocked.
no need for any crazy things like the SSPL or what not. Though a few people have mentioned hitting the unbootable cycle when relocking just like when unlocking. if this happens, just flash the stock shipped rom again."
But i don't know what to do now because of the activesync conection problem with my pc and the eternal loading screen...
So if any one know how can i fix this problem i will be very been thankful.