PPCGeeks - [12-15-09]Android CDMA TouchPro: TEXT, TALK, data and wifi(RAPH800) Ported!!!

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- Windows Mobile Software (http://forum.ppcgeeks.com/forumdisplay.php?f=23)

- - [12-15-09]Android CDMA TouchPro: TEXT, TALK, data and wifi(RAPH800) Ported!!! (http://forum.ppcgeeks.com/showthread.php?t=61457)

Re: [9-9-09] Android for CDMA Touch Pro (RAPH800 and Diamond) Ported!!!

Also could you post your startup.txt so we can see if there are any differences that might make it possible?

--PS

Re: [9-9-09] Android for CDMA Touch Pro (RAPH800 and Diamond) Ported!!!

Quote:

Originally Posted by mercado79 (Post 1204421)

Just thought I'd mention that working instructions for the Diamond can be found over in this thread in the Diamond section (thread started by toastcfh):

http://forum.ppcgeeks.com/showthread.php?t=84214

Basically, it requires a modified zImage file from a post on XDA devs (credit goes to MrPippy):

http://forum.xda-developers.com/atta...0&d=1252565799

...and also the start up script is different too. Take note of the MTYPE and msmts_calib values.

Code:

set RAMSIZE 0x08000000

Set ramaddr 0x10000000

set MTYPE 2040

set KERNEL zImage

set initrd initrd.gz

#

# The following kernel parameters are useful

# ppp.username - The username used to connect to the network when dialing #777

# ppp.password - The password used to connect to the network when dialing #777

# msm_sdcc.msmsdcc_fmax - The maximum frequency (in Hz) used by the SD controller

# pm.sleep_mode - The mode used when the phone is off

# 0=Power Collapse Suspend, 1=Power Collapse, 2=Apps Sleep,

# 3=Slow Clock and Wait for Interrupt 4=Wait for Interrupt

# Default is 3, use 0 for best power savings

# board-htcvogue.panel_type - Panel type used to power the panel off and on

# 0=Don't power off the panel (Default)

# 1=Hitachi 2=Topoly 3=Samsung

# mddi.width - width of the scaled display

# mddi.height - height of the scaled display (these should be multiples of 16 for the camera to work I think)

set cmdline "msmts_calib=0x81.0x393.0x358.0x7D msmvkeyb_toggle=off mddi.width=320 mddi.height=480 lcd.density=240 ppp.apn=sprint ppp.username=username ppp.password=password no_console_suspend"

#set cmdline "no_console_suspend"

# fbcon=rotate:1

# console=ttyMSM0"

Boot

mkdir /proc

mkdir /sys

mount -t proc proc /proc

mount -t sysfs sysfs /sys

mount -t tmpfs tmpfs /dev

mdev -s

"ls -l /dev/mmc*"

I've attached my start up script below.

Quote:

Originally Posted by Plackslayer (Post 1209859)

Also could you post your startup.txt so we can see if there are any differences that might make it possible?

--PS

Plackslayer, i used the post above you for my phone. You might have to change zImages, but all i know is that i was fully functional besides the other radios. When i turned WiFi off, it restarted...so i don't want to mess with that setting. Plus, sometimes the program would terminate, like changing wallpapers....but it was okay.

Re: [9-9-09] Android for CDMA Touch Pro (RAPH800 and Diamond) Ported!!!

Attempting quite a few methods here on my RAPH800 and all have been a no go. Most won't even boot as I believe that custom zImage is strictly for a Diamond, more specifically the DIAM500.

I'll keep tinkering with it though and see if something works. Trying all variants of the startup.txt

--PS

Re: [9-9-09] Android for CDMA Touch Pro (RAPH800 and Diamond) Ported!!!

No new RAPH800 news, but they have started the daily updates again with the GSM Android. Here is to hoping that the daily updates will eventually include 1.6.

Up-to-date zImage

--PS

Re: [9-9-09] Android for CDMA Touch Pro (RAPH800 and Diamond) Ported!!!

The thing is when I try to run haret.exe, it goes into the process but then says "waiting for SD card". i didn't mess with any of the files, so i'm going to delete them and try again.

Re: [9-9-09] Android for CDMA Touch Pro (RAPH800 and Diamond) Ported!!!

Yeah most of these fail with the RAPH800 sadly. I have gone to the custom 10-1 zImage that was made specifically for the 800.

RAPH800

Re: [9-9-09] Android for CDMA Touch Pro (RAPH800 and Diamond) Ported!!!

Update - new custom RAPH800 zImage - nothing major for me, maybe you can have more luck.

LINK

--PS

Re: [9-9-09] Android for CDMA Touch Pro (RAPH800 and Diamond) Ported!!!

so is there a working cdma diamond port yet?

Re: [9-9-09] Android for CDMA Touch Pro (RAPH800 and Diamond) Ported!!!

I do not think CDMA is working on either a Diamond or a Raph right now. Except for a report that it did here by thvoicwetin.

--PS

Re: [9-9-09] Android for CDMA Touch Pro (RAPH800 and Diamond) Ported!!!

Do appreciate you keeping up updated! Keep up the good work :)