PPCGeeks - WM 6.5 Kitchen QVGA and VGA Developer Edition

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- Windows Mobile Software (http://forum.ppcgeeks.com/forumdisplay.php?f=23)

- - WM 6.5 Kitchen QVGA and VGA Developer Edition (http://forum.ppcgeeks.com/showthread.php?t=54678)

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

need ppck xip when got time joojoo, please. just loaded 21858, but already old haha

also, 21858 is "holy cow" blazin' fast....

secondly, does neone have ne idea why this will not result in NON-page scrolling?

Third, i saw the question but didn't an answer, are there any instructions around on how to get the Herman 6.5 kernal going in ppck? copy over the boot.rgu and do what to get the xip?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Quote:

Originally Posted by joojoobee666 (Post 1191347)

Maybe this reg will help?

[HKEY_LOCAL_MACHINE\SYSTEM\GWE\Touch\Filter]
"MinimumTapTime"=dword:01 <-value is milliseconds.

Helped. Thanks ;)

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Quote:

Originally Posted by lobsterdave (Post 1189804)

Ahh, beaten to it.

Here it is in Visual Kitchen format

WM65-21859-LANG-0409-DPI-192-RESH-480-RESV-640.7z
http://www.sendspace.com/file/p2hjvl

Doesn't boot for me..

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Quote:

Originally Posted by MassStash (Post 1191849)

Here's a Titan XIP for ya. Sorry I haven't had time to get 21859 PPCK ready.

As far as using a native kernel in PPCK, it's officially not supported, but can be done. It also varies on which version of PPCKitchen you are using (i.e. Release or Dev.) as to getting it to work. It does work with the Dev version quite easily, as long as you have WMReloc_6.5.exe doing the reallocation of the modules AND you specify the XIP as a WM6.5 XIP in the Device config file. (example: XipFilename=Herman,WM6.5_21859N,WM6.5,Herman65_218 59_xip.BIN).

Of course you will need the 6.5 native XIP (I have attached that as well). You will not need the boot.rgu. Also, you will need to use a different COMMON files other than what I normally post as those have a lot of modules recmodded for the NON native 6.5 kernels and you don't want to do that if you have a native 6.5 kernel. Within those common files, be sure to use the .ROM from a 6.5 build and also replace the .VM in the herman core with the one released with the Kernel from Da_G.

As far as that cpr not working goes, try looking at the one that came with the source SYS and comparing values. Some things change between builds and using an older one/newer one can cause that.

FYI to all other PPCK users, I hope to get some 21859 up later today. :)

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Quote:

Originally Posted by MassStash (Post 1189126)

Thank you for having a look, and for any and all help.

oooooo, 21858......

JooJoo, thats my Titan VK and yes he is including it in his rom... But I don't think thats the problem, first you need to update your kitchen with the latest files, then you should start build with the bare minimum and gradually add more and more pakages and building in between to make sure your build is working. You could narrow it down to a problematic OEM or maby you are adding to much stuff? I'm not sure but thats what I would do, also I can give you an update kitchen I'll try and post it tonight on my original kitchen thread. One oter thing I was doing is cutting alot of the unnesary stuff out of the SYS folder cause I was finding the roms to be to big once I added my OEMs to it. Just wanted to give you a couple of tips:thumbright:

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Does anyone know what resource the signal strength icon on the top bar pulls from in WM6.5?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Hi, i have one problem with build 23053 qvga , when i try to setup an staic ip like 192.168.0.24 in the box i only can set two numbers not tree in the dns tab it works ok.

Regards.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Quote:

Originally Posted by focus-pl (Post 1192485)

Doesn't boot for me..

Sounds like a personal problem -- works great for me..

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Quote:

Originally Posted by corey1138 (Post 1193029)

Does anyone know what resource the signal strength icon on the top bar pulls from in WM6.5?

If you haven't installed the HTC Phone Canvas, it pulls from CommManagerRes.dll. If you have installed the HTC Phone Canvas, it pulls from phcanOverbmp.dll.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

PPCKitchen files for 21859 for the PPCK devs out there. The DPI are the EXACT same rar's from my 21857 post, so if you already have those, reuse 'em. No need to download these. All the other standard notes apply.

The XIP rar contains XIPs for the Apache, Herman, Kaiser, Titan, Victor and Vogue. All are spinlock patched except for the Apache.

SYS_21859_Common
http://www.4shared.com/file/13540726...59_Common.html

SYS_21857_192DPI_0409
http://www.4shared.com/file/13399185...2DPI_0409.html

SYS_21857_96DPI_0409
http://www.4shared.com/file/13399215...6DPI_0409.html

Warning! If these files are used in any other kitchen other than PPCKitchen, please be sure that you fix the file attributes BEFORE or DURING cooking, otherwise problems will ensue (see FIX here).

Thanks to Miri for the goods! :headbang: