PPCGeeks
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Windows Mobile Software (http://forum.ppcgeeks.com/forumdisplay.php?f=23)
-   -   BAF MSL Grabber, version 1 (http://forum.ppcgeeks.com/showthread.php?t=43560)

yotoad 12-08-2008 08:51 PM
Re: BAF MSL Grabber, version 1
 
Quote:
Originally Posted by ivan1.ruiz (Post 554374)
I get the error on the Diamond and the Touch Pro as well.
i have the same error

yotoad 12-09-2008 11:31 AM
Re: BAF MSL Grabber, version 1
 
Still not working on my sprint ROM -- are there any known tweaks that conflict with this program? I have the performance and battery tweaks .cab running, diamond tweak has changed some TF3d stuff, but nothing huge . . .

still not grabbing the MSL -- i'd love to have it to change my SCI back to 1 on my newly exchanged TP

exterminator20 12-13-2008 12:40 AM
Re: BAF MSL Grabber, version 1
 
installed cab....did soft reset....worked great!!!!!!

BrianPAdams 12-16-2008 01:52 PM
Re: BAF MSL Grabber, version 1
 
I had .NETCF 3.5 installed, installed this app and it gave me an error. I did a soft reset and it worked great! Thanks!

hammondfra 12-17-2008 08:29 PM
Re: BAF MSL Grabber, version 1
 
Yeah no luck here on getting it to work...There has been an error retriving your MSL.

Only hacks I have is Alltel GPS Hack, your GPS program, .net 3.5 (Per your cab link), SPBshell and the SMSNoSentMsg registry hack.

HTC6800 Titan, Stock Alltel Rom

imneveral0ne 01-02-2009 11:28 PM
Re: BAF MSL Grabber, version 1
 
sounds like the fix is that you have to soft reset your phone, im soft reseting right now, i hope it works :-p wanna install the new prl update

thangdoan1 01-06-2009 11:27 PM
Re: BAF MSL Grabber, version 1
 
I'm confused. Once you have received the MSL code, do you have to do anything else?

Baffles 01-13-2009 02:03 AM
Re: BAF MSL Grabber, version 1
 
No offense, but if you don't know what to do with an MSL then you shouldn't be messing around with it.

MSL is used to get in and poke around in the settings for your phone. The most common things to do are to tweak your slot cycle index and change your PRL.

kidmet 02-03-2009 10:07 AM
Re: BAF MSL Grabber, version 1
 
Quote:
Originally Posted by Baffles (Post 636433)
No offense, but if you don't know what to do with an MSL then you shouldn't be messing around with it.

MSL is used to get in and poke around in the settings for your phone. The most common things to do are to tweak your slot cycle index and change your PRL.
Is your net framework link dead?

Tuffgong4 03-26-2009 09:24 AM
Re: BAF MSL Grabber, version 1
 
works perfectly...thanks a ton...needed a soft reset.

Eight Jade Horses 03-29-2009 04:01 AM
Re: BAF MSL Grabber, version 1
 
Worked like a charm on my "newish" HTC Diamond! Thanks!

fergdogg23 03-31-2009 02:22 AM
Re: BAF MSL Grabber, version 1
 
Worked like a charm...THANKS

EDGE23 04-23-2009 12:22 AM
Re: BAF MSL Grabber, version 1
 
1 Attachment(s)
works great on my TP.

for those who still cant get it going try installing net3.5 on your phone, enable flight mode, then reset.

this is a .cab?? i found somewhere here in the forums.

ivan1.ruiz 04-24-2009 03:14 PM
Re: BAF MSL Grabber, version 1
 
Still works fine for me. I even cook it in on all my releases. Thanks OP

toviaheli 05-01-2009 10:02 AM
Re: BAF MSL Grabber, version 1
 
not working on me with a Pro running 6.5.

hermitboy 05-14-2009 07:12 PM
Re: BAF MSL Grabber, version 1
 
I keep on getting the error COM9 does not exist.
I have the Treo 800w and I have tried installing and reinstalling the .net program making sure that the phone was in airplane mode and that all data connections were turned off I have done several soft resets heck I even did a hard reset and started from scratch and I still get that dang COM9 error message. I am just scratching my head here on what I am doing wrong.:scratch:
So if anyone has any suggestions I am game.

Thanks

infamousdevil 05-22-2009 12:43 PM
Re: BAF MSL Grabber, version 1
 
Same as Hermitboy... but my Treo is a 700wx. Same exact error "The port 'COM9:' does not exist." ... any suggestions please Baffles? It would be much appreciated!

Curb71 05-26-2009 06:37 AM
Re: BAF MSL Grabber, version 1
 
didnt work for me. turned off my radio and soft reset and bam! works great! Thanks! way easier than having sprint ask why I want it.

moclov12 07-10-2009 04:58 PM
Re: BAF MSL Grabber, version 1
 
alright what am i doing wrong, whenever i extract the file to my phone it doesnt come as one folder, it comes in all the tiny folders, and whenever i try to click set up on my phone it tries to open the internet

Baffles 07-11-2009 11:48 AM
Re: BAF MSL Grabber, version 1
 
You shouldn't be extracting any files - download the .cab file and open it on your phone to run the installer for it.

eldenson 08-09-2009 04:45 PM
Re: BAF MSL Grabber, version 1
 
I have a Sprint Touch Diamond. I used BAF MSL Grabber to get my MSL. I launch EPST and click on edit. When I enter the MSL that BAF MSL Grabber gave me into the lock code, I get and error to check my MSL.

raptorous_g4 08-13-2009 03:38 PM
Re: BAF MSL Grabber, version 1
 
On Psyki 3 worked Fine off bat, Mighty Rom 6 here was my method that worked

1. Installed from cab

2. Soft Reset.

3. Installed from cab again

4. Soft Reset

5. Let phone boot, Disabled phone and data,

6. Ran BAF.. Worked...

bradart 08-13-2009 09:39 PM
Re: BAF MSL Grabber, version 1
 
If you can't get this program working on your Diamond or TP (like myself), just do the regedit. Works for me EVERY TIME.
  1. Get a Registry Editor (i like PHM)
  2. Navigate to HKLM/Software/HTC/ATDbgLog
  3. Change the value of Enable to 1
  4. Change the value of LogMode to 1
  5. Wait 2-5 mins. (I usually wait like one minute, but whatever works)
  6. Soft reset
  7. Check to make sure the folder /Atlog has been created in the main memory
  8. Navigate back to the registry location indicated before (HKLM/Software/HTC/ATDbgLog)
  9. Change Enable to 0
  10. Change LogMode to 0
  11. Wait 2-5 mins.
  12. Soft reset
  13. Navigate to the /Atlog folder in the main memory and openATDbg0.txt
  14. There will be a RETARDED amount of information in this text file. You are looking for "Rx:+HTC_RMSL:######\r\n0\r"
  15. Those pound signs are your MSL. Enjoy.

Hit thanks if i helped.

ciper 09-10-2009 04:10 AM
Re: BAF MSL Grabber, version 1
 
I am trying to use your tool on a Q with Windows Mobile 5 and .NET 3.5 and this is the error I get when I run the application from the start menu. If i click details I see -

"BAF MSL.exe
NotSupportedException

at
Micorosft.AGL.Common.MISC.HandleAr(PAL_ERROR ar)
at
System.Windows.Forms.Control._InitInstance(WNT wnt, UInt32 dwstyle)
at
System.Windows.Forms.Control.cctor()
at
BFL MSL.MainWindow.InitializeComponent ()
at BAF_MSL.MainWindow..ctor()
at BAF_MSL.Program.Main


*Note: There may be typos as I wrote all of that by hand!

Thanks for the help

projkt4 09-24-2009 07:54 PM
Re: BAF MSL Grabber, version 1
 
Quote:
Originally Posted by ciper (Post 1153610)
I am trying to use your tool on a Q with Windows Mobile 5 and .NET 3.5 and this is the error I get when I run the application from the start menu. If i click details I see -

"BAF MSL.exe
NotSupportedException

at
Micorosft.AGL.Common.MISC.HandleAr(PAL_ERROR ar)
at
System.Windows.Forms.Control._InitInstance(WNT wnt, UInt32 dwstyle)
at
System.Windows.Forms.Control.cctor()
at
BFL MSL.MainWindow.InitializeComponent ()
at BAF_MSL.MainWindow..ctor()
at BAF_MSL.Program.Main


*Note: There may be typos as I wrote all of that by hand!

Thanks for the help
I get the same error with my Q as well. I've tried both the vanilla 3.5 framework and the 3.5 cab you linked to. I've tried a soft reset as well. Any suggestions?

tkedch 09-25-2009 01:46 PM
Re: BAF MSL Grabber, version 1
 
I just tried it with my touch pro and it didn't work even after two resets. I don't know if this is a repeated information, but here is how I got it to work:

1. install the program
2. put your phone into flight mode.
3. reset.
4. Run the program

you should be able to retrieve the numbers.

lexcell 09-29-2009 02:15 PM
Re: BAF MSL Grabber, version 1
 
1 Attachment(s)
Quote:
Originally Posted by ciper (Post 1153610)
I am trying to use your tool on a Q with Windows Mobile 5 and .NET 3.5 and this is the error I get when I run the application from the start menu. If i click details I see -

"BAF MSL.exe
NotSupportedException

at
Micorosft.AGL.Common.MISC.HandleAr(PAL_ERROR ar)
at
System.Windows.Forms.Control._InitInstance(WNT wnt, UInt32 dwstyle)
at
System.Windows.Forms.Control.cctor()
at
BFL MSL.MainWindow.InitializeComponent ()
at BAF_MSL.MainWindow..ctor()
at BAF_MSL.Program.Main


*Note: There may be typos as I wrote all of that by hand!

Thanks for the help
Im not sure if it WILL work with a Q, it's more wrote to work with HTC devices and the Q is not one. Here is the simplest way to get the SPC of a Q. Use a virtual port and make the com port 1 then run this se47 tool.

svtvin 11-09-2009 03:40 PM
Re: BAF MSL Grabber, version 1
 
Hi there! Works great whithout soft reset on Touch Pro from Sprint (WM6.5)! Thanks a lot!

masha30 11-11-2009 08:25 AM
Re: BAF MSL Grabber, version 1
 
hi, i install a cab file on my storage card and when i tried to ran this programm, it's keep telling me ' error in retriving the code'. and also when i try ti launch epst, its give me an error message too. can u help me with that. thank u.

kingfisher1111 11-27-2009 09:50 AM
Re: BAF MSL Grabber, version 1
 
Guys,
I have recently purchased HTC diamond from ebay and I want to use it on Reliance CDMA(India).
Can any one give instructions on what exactly I need to do by using this program?
Please help me guys and Happy Thanks Giving Day to all the people on the forums.
Thanks
Kingfisher

GirlGoneGeek 01-12-2010 02:21 AM
Re: BAF MSL Grabber, version 1
 
bump....

needed today. awesome program!

TeslaCoiled 02-05-2010 09:55 AM
Re: BAF MSL Grabber, version 1
 
It's good to see I wasn't the only Treo 800w with a problem,
but has anyone with a
Treo 800w gotten this to work?

I tried reinstalling both the ms net & baf cabs in different orders,
reboots, battery pulls, turning off the radio,
& still getting an error msg,
clipped off by the gold lock icon:
een an error
your MSL.
Get n touch, etc reads fine.

Thanks kindly!

gambitz 02-16-2010 07:27 PM
Re: BAF MSL Grabber, version 1
 
I have Sprint Samsung Intrepid. Was not altered in any way.

I installed the .net compact framework from the link provided in first page.

Then I installed the BAF MSL grabber.

Turned off my ph, turned on.

Ran the BAF, it gave me a msg saying an error has occured, please contact BAF for support.

Anybody have this working on the intrepid?

Update: BAF creator told me that it only works on HTC phones.

nevergonnauseth 03-30-2010 01:34 AM
Re: BAF MSL Grabber, version 1
 
hey, i have a HTC TP2 with US Cellular and it doesnt work. I updated my .net to 3.5 and also restarted the phone about 7 times in flight mode. It's also the stock rom, any ideas? It has been hardspl unlocked though

jayus29 04-08-2010 12:18 PM
Re: BAF MSL Grabber, version 1
 
works fine on my palm treo pro. gr8 job bro. would make a donate soon!!
:headbang::headbang::headbang:

nokianick 04-16-2010 02:48 PM
Re: BAF MSL Grabber, version 1
 
Palm Pro: updated .net with your cab(and thank you very much as I like to stay updated) and this worked GREAT! Thanks. BTW this is a stock Alltel Palm Pro.

walter17 05-18-2010 05:45 PM
Re: BAF MSL Grabber, version 1
 
Quote:
Originally Posted by bradart (Post 1100124)
If you can't get this program working on your Diamond or TP (like myself), just do the regedit. Works for me EVERY TIME.
  1. Get a Registry Editor (i like PHM)
  2. Navigate to HKLM/Software/HTC/ATDbgLog
  3. Change the value of Enable to 1
  4. Change the value of LogMode to 1
  5. Wait 2-5 mins. (I usually wait like one minute, but whatever works)
  6. Soft reset
  7. Check to make sure the folder /Atlog has been created in the main memory
  8. Navigate back to the registry location indicated before (HKLM/Software/HTC/ATDbgLog)
  9. Change Enable to 0
  10. Change LogMode to 0
  11. Wait 2-5 mins.
  12. Soft reset
  13. Navigate to the /Atlog folder in the main memory and openATDbg0.txt
  14. There will be a RETARDED amount of information in this text file. You are looking for "Rx:+HTC_RMSL:######\r\n0\r"
  15. Those pound signs are your MSL. Enjoy.

Hit thanks if i helped.
I know it's been a while since this thread was updated, but this regedit nor the BAF MSL Grabber worked on my Verizon TP2. Does anyone have it working on their TP2 device?

weefa 08-20-2010 01:49 AM
Re: BAF MSL Grabber, version 1
 
I'm having an issue with getting my MSL. I just activated my refurbished phone from Asurion and loaded it with WM6.5 (EnergyROM). I never had any issues with my old Touch Pro, which was purchased new.

I ran GetSPC, entered in my HEX ID and it gave me one MSL number. I ran BAF MSL Grabber and it gave me another MSL number. Neither of those work in EPST.

BTW, if any of you are having issues with BAF MSL Grabber not being able to obtain your MSL, you will have to put your phone in Airplane Mode before running it.

Anyone know what's going on?

ralph3rd 02-17-2011 06:53 AM
Re: BAF MSL Grabber, version 1
 
Quote:
Originally Posted by Baffles (Post 502538)
BAF MSL Grabber is an application to quickly and painlessly give you the MSL code for any CDMA HTC device running Windows Mobile. It sure beats having to do manual hacking or trying to convince Sprint to give it to you over the phone. The MSL is the code you are required to enter to edit any of your radio parameters. One popular parameter change is to lower the slot-cycle index, which makes your phone poll the tower more often, thereby making your phone ring quicker when someone calls you. Radio/PST configuration edits can be found all over the web via Google.

Please note that to use this you must have .NET 3.5 instealled on your device.

To download, please visit BAF MSL Grabber | BAF.cc - you can either download the .cab and transfer it to your phone and install it, or scan the QR code with software such as i-Nigma. OEM is also over at the site. This is the first fully QR-Code ready app I have released, meaning that if you go to the About tab and click share, a QR code will pop up so others can scan+download directly off the screen of your device.

Screenshot:
http://code.baf.cc/mslgrab/mslgrabber.png


I hope this isn't going to put me in some kind of legal jeopardy. I don't see why it would, maybe I need a disclaimer someplace though.
You are the MAN. Worked perfectly on Sprint Touch Diamond with original sprint rom. I am a complete newbie and know nothing about all these terms and functions, I just want my cool phone to work on boost mobile... spent 16 hours trying different methods to get this unlock code and FINALLY. I thank you one million times. This program works perfectly with the version of .NET Baffles gave to download. Thanks again fellow new yorker!

unodos 02-17-2011 08:20 AM
Re: BAF MSL Grabber, version 1
 
Hello, I am triying to get this program working,

I tried almost everything... installing/uninstalling net cf 3.5 or 3.7, resetting, triying to make it fast, slow... disabling radio, enabling radio and letting the program disable it...

it always says error... (COM9 doesn´t exist)

and if I click on launch EPST if gives me this error:

Quote:
BAF MSL.exe
Win32Exception

en System.Diagnostics.Process.StartWithShellExecuteEx (ProcessStartInfo startInfo)
en System.Diagnostics.Process.Start()
en System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
en BAF_MSL.MainWindow.menuItem2_Click(Object sender, EventArgs e)
en System.Windows.Forms.MenuItem.OnClick(EventArgs e)
en System.Windows.Forms.Menu.ProcessMnuProc(Control ctlThis, WM wm, Int32 wParam, Int32 lParam)
en System.Windows.Forms.Form.WnProc(WM wm, Int32 wParam, Int32 lParam)
en System.Windows.Forms.Control._InternalWnProc(WM wm, Int32 wParam, Int32 lParam)
en Microsoft.AGL.Forms.EVL.EnterMainLoop(IntPtr hwnMain)
en System.Windows.Forms.Application.Run(Form fm)
en BAF_MSL.Program.Main()
I am using a treo pro gsm, vodaclon t850ueu

windows 6.5 with cmonex...

Can anyone help me get the msl please?


All times are GMT -4. The time now is 12:33 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2026, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0