OverClock for TP2 ~ 9/6/10 NEW UPDATES! For all ROMS ~ MAXX Battery Tweak

[bteljuice]

Originally Posted by sprinttouch666

Hey everybody, what's the difference between v3 and v4+ of the script (besides the GUI) ???

i have gone back to v3 because i can use the highest frequency (787.2mhz) without any lockups or SOD's. But with v4, 4.1, 4.2 (cab) and 4.21 (cab) I have tried a lot of combinations of clock speeds and polling intervals but SOD's every 10 minutes. (even with low frequencies like 600's)

anybody else experience this or have any idea's?
(P.S. I'm running the the newest NRG MaxSense 6.5)

With the GUI, What's the Throttle speed you're putting?

[quickdraw62]

Originally Posted by nayr1482

do you use standard lock screen or something else? several users reported issues with pocket shield, I have asked them for registry info but nobody has given me anything

I just use the button at the top of the phone. I'm just on the stock VZW 6.5 with manila 2.5.

It seemed to work fine when I hit the button to turn off the display, then hit it again to turn it back on. But if I wait longer than just a few seconds, I can't wake the phone up and have to remove my SD card and battery to reboot.

[nayr1482]

Originally Posted by sprinttouch666

Hey everybody, what's the difference between v3 and v4+ of the script (besides the GUI) ???

i have gone back to v3 because i can use the highest frequency (787.2mhz) without any lockups or SOD's. But with v4, 4.1, 4.2 (cab) and 4.21 (cab) I have tried a lot of combinations of clock speeds and polling intervals but SOD's every 10 minutes. (even with low frequencies like 600's)

anybody else experience this or have any idea's?
(P.S. I'm running the the newest NRG MaxSense 6.5)

literally the only difference in the loop of v3 vs v4.x is that i allow the user to change the poll interval. other than that the loops are identical.

[nayr1482]

Originally Posted by Holyman007

Sry for not getting back with the info. I did a print screen of my registry of pocketshield. Hopefully this is what you need. The other folders in the pocketshield registry don't seem to have any useful info.

Just to clarify what happens before I get SOD: Almost all the time when I receive a missed text or a missed call, I will get SOD (probably because it wakes by itself and then goes back to sleep while still in pocketshield).

It sometimes goes into SOD if I turn the screen on but I don't unlock it from pocketshield which makes it go back to sleep after 15sec.

http://img191.imageshack.us/img191/7...ldregistry.png

holy cr@p that is a lot of entries!
i may have to install ps to figure this thing out...


EDIT: OK...what version are you guys using? "Protection" or "Proximity" ???

[MrBeOTP2]

any damages from OVERLOCK on device ??? ??? ??? ??? ??? ??? ???

[japper88]

HAHA I am at 768mhz now! And I got bored so I edited nayr's gui script so that the menu says "4.21" instead of "4.1". Maybe I'll add a nice Icon too, anyone have any nice icons that might work for this?

[solarflarex]

Originally Posted by sprinttouch666

Hey everybody, what's the difference between v3 and v4+ of the script (besides the GUI) ???

i have gone back to v3 because i can use the highest frequency (787.2mhz) without any lockups or SOD's. But with v4, 4.1, 4.2 (cab) and 4.21 (cab) I have tried a lot of combinations of clock speeds and polling intervals but SOD's every 10 minutes. (even with low frequencies like 600's)

anybody else experience this or have any idea's?
(P.S. I'm running the the newest NRG MaxSense 6.5)

I installed the latest cabbed up one from yesterday. used the 4.21 script. installed the cab to device and script to storage. Ran the oc my device froze restarted device now my start menu/button doesn't work even hardkey. i uninstalled and same dealio

Trying hard reset.

[japper88]

Originally Posted by solarflarex

I installed the latest cabbed up one from yesterday. used the 4.21 script. installed the cab to device and script to storage. Ran the oc my device froze restarted device now my start menu/button doesn't work even hardkey. i uninstalled and same dealio

Trying hard reset.

Really?

What was your safemode speed/time?
What was your throttle speed?
What was was your boost speed?

That's a bummer. So you did the following?:
1. installed mortscript to your device
2. installed the msm7kcpuspeed cab to your device
3. the oc_auto4.21 cab to your storage card
4. ran the oc_auto4.21_gui shortcut from your startmenu and set it up it all up
5. softreset

[solarflarex]

Originally Posted by japper88

Really?

What was your safemode speed/time?
What was your throttle speed?
What was was your boost speed?

That's a bummer. So you did the following?:
1. installed mortscript to your device
2. installed the msm7kcpuspeed cab to your device
3. the oc_auto4.21 cab to your storage card
4. ran the oc_auto4.21_gui shortcut from your startmenu and set it up it all up
5. softreset

I didn't install mortscript because i think NRG's roms have it installed already. I did

#2
#3
then ran #2

it froze my device when i moved the slider immediately. After pulling battery etc my start menu wouldn't work period. even after pulling battery and waiting. Hard reset is the only thing that fixed it.

oh my shift and fn didn't work on my kb when composing messages in text messages too. I thought maybe it was nrg rom because i recently flashed to the latest.. but after hard reset that is ok too.

[japper88]

Originally Posted by solarflarex

I didn't install mortscript because i think NRG's roms have it installed already. I did

#2
#3
then ran #2

it froze my device when i moved the slider immediately. After pulling battery etc my start menu wouldn't work period. even after pulling battery and waiting. Hard reset is the only thing that fixed it.

You didn't do step 4? You shouldn't be messing with the CPU speed from msm7kcpuspeed, instead you should use the oc_auto4.21gui to adjust the speed and such.