PPCGeeks
Page 4 of 11 « First 23 4 56 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Titanium Tweaks (http://forum.ppcgeeks.com/forumdisplay.php?f=82)
-   -   CHome/Titanium Modifications - Adding Panels (http://forum.ppcgeeks.com/showthread.php?t=63086)

Hafrust 04-10-2009 12:21 PM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by fishfuzz (Post 838705)
Whenever you duplicate a GUID (or mess up a registry setting), some part of CHome will go invisible. Until we find other valid GUIDs, or figure out a way to make them valid, if you want more than one created, one will be blank.

What GUID is your CWelcomeCenter?
I'm not sure if you were directing that question to me, or the previous post. One or some of the 6.5 Vogue ROM's have the welcomecenter removed, so they don't have any registry entries pertaining to it. If you are needing mine, just let me know and I'll post it up.

fishfuzz 04-10-2009 12:30 PM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by Hafrust (Post 838731)
I'm not sure if you were directing that question to me, or the previous post. One or some of the 6.5 Vogue ROM's have the welcomecenter removed, so they don't have any registry entries pertaining to it. If you are needing mine, just let me know and I'll post it up.
I was actually asking for anyone/everyone. ;) I'm curious if the GUID is device specific. I've looked through the registry for other mentions of the working GUIDs, but nothing. Starting to think it's connected to a .dll/config file somewhere else.

Hafrust 04-10-2009 12:35 PM
Re: CHome/Titanium Modifications
 
Mine is {97343B9B-5BB5-474d-98AA-E4CD2DD0A873}.

I think everything is connected to cmhome.dll and bronzerez.dll. That's about where my lack of knowledge forces me to stop. New developments here (starting on post 254) are really promising! now I know what I'm going to be doing over the weekend.

fishfuzz 04-10-2009 12:36 PM
Re: CHome/Titanium Modifications
 
Just found this over at XDA (unverified by me), might be helpful for those not using templates:

:MSPIMG 'Pictures and Videos Grid'
:MSMRULauncher 'Recent Programs
:MSTASKMGR 'Task Manager'
:MSWRLSMGR 'Wireless manager'
:MSWELCOMECENTER 'Welcome Center (Set Date time, Device Password, Set up e-Mail, Background)'
:MSSTART 'Start Menu Only'
:MSCdial 'Phone Dial Pad(Make a call)'
:MSCAMERA 'Open Camera
:MSINTERNET_SHARING 'Internet sharing App and Connection Settings'
:MSHome 'back to Home Screen'
:MSCPROG 'Last call Dialog/Dialer'
:MSWELCOME '?Welcome.exe Doesn't work on my phone'
:MSREMNET '?Remnet.exe Doesn't work on my phone'
:MSBranding '?BannerImage Doesn't work on my phone'
:MSCLOCKALARM 'Clock and Alarm Dialog'
:MS_SNDMGR '?? Doesn't work on my phone'
:MSSYNCAPP 'Active Sync Dialog'
:MSINBOX 'MESSAGE INBOX'
:MSTASKS 'TASKS Dialog'
:MSTNOTES 'Voice Notes'
:MSCONTACTS 'Contacts list'
:MSCALENDAR 'Calendar/Appointments'
:MSPOUTLOOK '?Outlook app Doesn't work on my phone'
:MSCALC_TPC 'Calculator'
:MSCALC 'Calculator'
:MSFEXPLORE 'File Explorer'
:MSPIE 'Internet Explorer'
:MSPIE;\WINDOWS\START 'Open Page...'
:MSQuickApp 'Quick List (Power Off, Lock, TaskManager, Wireless Manager, Profiles) '
:MSProfiles 'Profiles (Normal, silent....)'
:MSSETTINGS 'Settings Dialog'
:MSSETTINGS;home.cpl.xml 'open Specific Setting (in this case home panel setup)'
:MSClog 'Call history'
:MSVOICEMAIL 'Call voice Mail'
:MSHOTVOICE '?? Doesn't work on my phone'
:MSVOICE '?? Doesn't work on my phone'
:MSScut 'Speed Dial Dialog'
:MSSOLITARE '?Solitare? doesn't work on my phone'

Hafrust 04-10-2009 12:38 PM
Re: CHome/Titanium Modifications
 
If I'm not mistaken, weren't those all of the ones for smartphones? I thing ours may vary a little bit.

fishfuzz 04-10-2009 12:55 PM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by Hafrust (Post 838801)
If I'm not mistaken, weren't those all of the ones for smartphones? I thing ours may vary a little bit.
More than likely. We probably need to go through them and check. :)

myshinynewtouch 04-10-2009 01:03 PM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by Hafrust (Post 838725)
As far as copying the settings section from that slidingpanel cpr, that's what I had to do with mine, and then you'll have to make minor adjustments to get the correct title and icons to show. You can take a look at my VGA cpr in post 1 and probably figure out what needs to be changed. And my launcher panel icons show up when I add pages, so I'm not sure what's going on there. It has to be something in the cpr though. I wish I still had my Mogul to play around with.
Actually nothing, now even my launcher panel icons show up fine... now i gotta find some nice 22x22 .png files for all my launcher programs.. gotta check out what the icon pack you have on page 1 holds...

i will give it a shot now with the settings layout from the sliding panel and report back.. and waiting for that new version from showaco - hopefully mnemonique can covert it to qvga soon enough...

Hafrust 04-10-2009 01:06 PM
Re: CHome/Titanium Modifications
 
If you haven't already, be sure and post in there so mnemonique knows about it too, just in case it was missed.

fishfuzz 04-10-2009 01:54 PM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by Hafrust (Post 838785)
Mine is {97343B9B-5BB5-474d-98AA-E4CD2DD0A873}.

I think everything is connected to cmhome.dll and bronzerez.dll. That's about where my lack of knowledge forces me to stop. New developments here (starting on post 254) are really promising! now I know what I'm going to be doing over the weekend.
GUID is the same as mine. So I think you are correct - those .dlls are key.

fishfuzz 04-10-2009 01:57 PM
Re: CHome/Titanium Modifications
 
1 Attachment(s)
I decided to go with a speed dial panel, leaving any settings as additional pages for the launcher. I still have to change the GUID to a editable to add new contacts, but don't do that very often.

Hafrust 04-10-2009 01:57 PM
Re: CHome/Titanium Modifications
 
My day tomorrow is pretty much free, so I'm gonna be playing with this stuff a lot. I have no experience in xml, but I'm going to see what kind of damage i can do. lol

RexSS345 04-10-2009 01:59 PM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by TheDude1120 (Post 833100)
I know we can change the order of the tabs on the default windows today screen, but is it fully customizable yet? I want...my favorites tab to open up opera or show my opera favorites not internet explorer cause i dont even use that. Is this possible using the registry??
Can anyone fill us in on the process for this? It's the only change I want to make and can't figure it out.

BTW, after trying the weather add-on I had to remove it because it moved the Wi-Fi name to just above the "test" slot.

So close, yet so far...

Hafrust 04-10-2009 02:03 PM
Re: CHome/Titanium Modifications
 
I haven't found a way yet, with the exception of making changes prior to cooking the ROM. I'm not sure what you mean by Wi-Fi name? I don't have anything pertaining to Wi-Fi on my home page.

strra 04-10-2009 02:08 PM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by Hafrust (Post 838426)
If you use the GUID of an unused panel (like cwelcomecenter), you can create a Contacts panel (or whatever panel you create) that will show up in addition to the launcher panel. That was the benefit in that extra effort. The way you currently have it set up, where it's one or the other, I think you can get the icons to be displayed by editing your cpr's at the Operator Services Expanded section and change "Icon" to "Image 1". If you are using the GUID of cwelcomecenter, you would also need to edit them at the CWelcomeCenter Expanded section and change "Icon" to "Image 1".

Also, if you are using the "launcher" panel, you can edit it's name in CHome Configurator. I have mine changed to "programs" and have pages added for my frequently used programs. That was why I wanted to keep that as well as adding a Contacts panel.
i did all of this... followed option 2 word for word... still having problems :(

Hafrust 04-10-2009 02:11 PM
Re: CHome/Titanium Modifications
 
What problems? Exact same as before?

myshinynewtouch 04-10-2009 02:59 PM
Re: CHome/Titanium Modifications
 
changed the .cpr files to include the settings panel, but still no dice - the registry GUID was not sticking - i typed in the guid from the settings panel to the contacts panel and soft-rest my phone - but the contact dialer panel was still not showing up - and my contacts dialer GUID was reset to the clinks panel...

how can i make that GUID stick in the registry ????

Hafrust 04-10-2009 03:19 PM
Re: CHome/Titanium Modifications
 
Are you copying the GUID to HKLM\Security\CHome\Default Settings\Custom Panel Name? Or are you trying to copy it to HKLM\Software\Microsoft\CHome\Custom Panel Name? Whatever GUID is in HKLM\Security will override the one in HKLM\Software.

strra 04-10-2009 04:25 PM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by Hafrust (Post 839042)
What problems? Exact same as before?
yup

Quote:
Originally Posted by Hafrust (Post 839252)
Are you copying the GUID to HKLM\Security\CHome\Default Settings\Custom Panel Name? Or are you trying to copy it to HKLM\Software\Microsoft\CHome\Custom Panel Name? Whatever GUID is in HKLM\Security will override the one in HKLM\Software.
tried that too... same result :(

Hafrust 04-10-2009 04:32 PM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by strra (Post 839410)
yup


tried that too... same result :(
Go to HKLM\Security\Default Settings\Contacts and post what value you have for the string in GUID.

strra 04-10-2009 04:42 PM
Re: CHome/Titanium Modifications
 
i got it
i see what was happening. the one in "security" was actually changing the one in "software"... just took the one from the welcomecenter in security and put it in the custom panel in security and it worked :) thank you so much for the help

also: myshinynewtouch, i will address your question when i get home from work (sorry, i'm in a hurry!)

Hafrust 04-10-2009 04:44 PM
Re: CHome/Titanium Modifications
 
Yep...the security one overrides the other. Glad you got it working!

CDENsomnia 04-10-2009 05:28 PM
Re: CHome/Titanium Modifications
 
I followed step 2 and am trying to copy the files back to my phone but it says it can't overwrite those files. Either they are being used or write protected. I made sure to disable titanium and soft reset and still can't write over the cpr files. Any ideas?

RexSS345 04-10-2009 05:28 PM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by Hafrust (Post 839017)
I haven't found a way yet, with the exception of making changes prior to cooking the ROM. I'm not sure what you mean by Wi-Fi name? I don't have anything pertaining to Wi-Fi on my home page.
If you highlight the clock pane and are connected to wifi, it will say "Wi-Fi: XXXX" where XXXX is the name of the network. If I install the weather pane, when the clock pane is highlighted the WiFi info shows up just above the text pane.

I just want Opera and weather on the home screen, is that so much to ask?

thvoicwethin 04-10-2009 05:37 PM
Re: CHome/Titanium Modifications
 
When I say i can't change my titanium setup i mean that i can't move the widgets around, take them out, add them, remove them, etc...


NOW, I can move and take them out, I CANNOT add any widgets besides the origs (i cannot add settings, or my own custom widget)

I've never been able to add my own widget or anything like Settings, etc etc.

Can someone point me in the right direction? I am using the Titanium Customizer

Hafrust 04-10-2009 05:44 PM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by thvoicwethin (Post 839534)
When I say i can't change my titanium setup i mean that i can't move the widgets around, take them out, add them, remove them, etc...


NOW, I can move and take them out, I CANNOT add any widgets besides the origs (i cannot add settings, or my own custom widget)

I've never been able to add my own widget or anything like Settings, etc etc.

Can someone point me in the right direction? I am using the Titanium Customizer
Please check your registry and see if you have anything for cwelcomecenter under HKLM\Software\Microsoft\CHome. People have mentioned that one of the 6.5 Vogue ROM's has that removed. It would help to know if yours is that way too. That will tell us which way to proceed. And just to clarify, you are using a Mogul as your profile indicates, correct?

thvoicwethin 04-10-2009 05:59 PM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by Hafrust (Post 839547)
Please check your registry and see if you have anything for cwelcomecenter under HKLM\Software\Microsoft\CHome. People have mentioned that one of the 6.5 Vogue ROM's has that removed. It would help to know if yours is that way too. That will tell us which way to proceed. And just to clarify, you are using a Mogul as your profile indicates, correct?
I have the CWelcomeCenter on there. It comes up when i first booted the ROM, it's in the registry now but not active.

I am using a Mogul, I usually update my sig and profile freq if anything changed.

Hafrust 04-10-2009 06:06 PM
Re: CHome/Titanium Modifications
 
OK...just wanted to make sure I didn't give you bad advice. Have you followed all of the instructions as listed in the first post? I posted QVGA CPR files last night that you can use if you don't want to edit yours yourself. Please double check that you have done everything as described in post 1 (Option 2) and you shouldn't have any problems at all. I'm getting ready to leave work and will try to check in a bit later, but no guarantees. Let us know how this works out for you and if you have any other problems come up with it.

CDENsomnia 04-10-2009 06:25 PM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by CDENsomnia (Post 839513)
I followed step 2 and am trying to copy the files back to my phone but it says it can't overwrite those files. Either they are being used or write protected. I made sure to disable titanium and soft reset and still can't write over the cpr files. Any ideas?
Anyone have any bright ideas to get the OS to unlock the files?

Hafrust 04-10-2009 07:16 PM
Re: CHome/Titanium Modifications
 
What file explorer are you using? I use Resco and Total Commander and I hadn't had any problems with it. Also, what type of phone and which ROM are you using?

bx718bklyn 04-10-2009 09:26 PM
Re: CHome/Titanium Modifications
 
I found this out in XDA http://forum.xda-developers.com/show...64#post3601164
its ok some of the panels do not work becuz it is for t-mobile phones but i installed it on my touch with miniweather and titanium weather the miniweather gives you detailed info, the one problem is the panels don work unless you use the right soft key or push the middle button which i figure is enter, Hope fully someone can mess with the reg and get to work better im not good at reg , all in all its good.

strra 04-10-2009 09:38 PM
Re: CHome/Titanium Modifications
 
update:
woohoo, got everything exactly how i want it:
http://i54.photobucket.com/albums/g9...Screen01-2.jpg

i noticed that after you paste welcomecenter's GUID, you can no longer edit it via configurator... so what i did was close chome, paste settings' GUID onto the custom panel (make sure to take note of the one that's in there before you paste!), open chome then close it again (the custom panel wil be invisible again), then open configurator and you should be able to edit it again. when you're done, just put back welcomecenter's GUID and you should be good to go... (makes me wonder if pasting settings' GUID to one of the built-in chome panels will allow you to edit it.... *ponder*)

fishfuzz 04-10-2009 09:47 PM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by strra (Post 840034)
i noticed that after you paste welcomecenter's GUID, you can no longer edit it via configurator... so what i did was close chome, paste settings' GUID onto the custom panel (make sure to take note of the one that's in there before you paste!), open chome then close it again (the custom panel wil be invisible again), then open configurator and you should be able to edit it again. when you're done, just put back welcomecenter's GUID and you should be good to go... (makes me wonder if pasting settings' GUID to one of the built-in chome panels will allow you to edit it.... *ponder*)
Yep. If you use the GUID of an editable panel (ie CLinks), one can edit the other panels using the Configurator. Of course, you could also just edit entries via the registry, once you've figured out how they work. =)

One can also refresh CHome with this app: http://www.mediafire.com/download.php?yzj2ig3xzza

chuggy 04-11-2009 01:13 AM
Re: CHome/Titanium Modifications
 
I'm having an issue get the configurator to show my custom panel. I can't figure out why. I've made all the changes necessary, and in the configuration screen I see my New "contacts" panel, but when I click show and reset it never actually shows. If i go back into configurator it is greyed out again. Any ideas. I'm guessing it's something easy, and I'm just over tired. I'll try back in the morning.

strra 04-11-2009 03:32 AM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by chuggy (Post 840459)
I'm having an issue get the configurator to show my custom panel. I can't figure out why. I've made all the changes necessary, and in the configuration screen I see my New "contacts" panel, but when I click show and reset it never actually shows. If i go back into configurator it is greyed out again. Any ideas. I'm guessing it's something easy, and I'm just over tired. I'll try back in the morning.

Quote:
Originally Posted by Hafrust (Post 812704)
  • Open ExtensibilityXML. In the string, you will need to insert the name of the panel you just created in the place you want it to be displayed on the CHome home screen. The plugins are separated by a ";"
did you do this step? if you don't do this, it will do that

myshinynewtouch 04-11-2009 10:16 AM
Re: CHome/Titanium Modifications
 
strra - i even got my contacts dialer to work - used the GUID of welcome center which hafrust posted couple of posts ago - but it shows up as "getting started" and i don't see the picture no more (that i guess is cause my .cpr files don't have the welcome center stuff in them )

"By using the GUID {F0A1B246-6E64-40cd-8E15-347D29FF6F18} you can add multiple plugin panels without sacrificing existing panels" - i tried using this GUID which was supposed to be add many panels - but it completely removed my existing invisible contacts panel...

did anyone have the "getting started" problem - i remember reading about it someplace but i don't know what it is for..

CDENsomnia 04-11-2009 10:19 AM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by Hafrust (Post 839711)
What file explorer are you using? I use Resco and Total Commander and I hadn't had any problems with it. Also, what type of phone and which ROM are you using?
I am using a touchpro from sprint. I have the copper rom from mightymike and juicy. I have tried multiple file explorers and even tried to copy the files to the windows directory from my laptop. I then reflashed to be sure I hadn't messed anything up and still have the same problem.

Hafrust 04-11-2009 10:23 AM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by myshinynewtouch (Post 840821)
strra - i even got my contacts dialer to work - used the GUID of welcome center which hafrust posted couple of posts ago - but it shows up as "getting started" and i don't see the picture no more (that i guess is cause my .cpr files don't have the welcome center stuff in them )

"By using the GUID {F0A1B246-6E64-40cd-8E15-347D29FF6F18} you can add multiple plugin panels without sacrificing existing panels" - i tried using this GUID which was supposed to be add many panels - but it completely removed my existing invisible contacts panel...

did anyone have the "getting started" problem - i remember reading about it someplace but i don't know what it is for..
Yeah..."Getting Started" is what the welcomecenter panel is set to show by default. If you have the adjusted cwelcomecenter section in your .cpr it will show whatever you named the panel. I included that section in the qvga cpr files I posted if you want to take a look and try copying it into yours. I thought your ROM didn't have the registry entries for cwelcomecenter? Or am I confusing you with another Vogue user?

Hafrust 04-11-2009 10:29 AM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by CDENsomnia (Post 840825)
I am using a touchpro from sprint. I have the copper rom from mightymike and juicy. I have tried multiple file explorers and even tried to copy the files to the windows directory from my laptop. I then reflashed to be sure I hadn't messed anything up and still have the same problem.
Hmmm...that's odd. Strra is using that ROM and didn't have any problems with it. Maybe try going into your windows directory and renaming the existing cpr files, then try copying the modified cpr files into windows? If it will allow you to do that, you should be able to go back in after soft resetting and delete the old cpr's that you renamed.

myshinynewtouch 04-11-2009 10:32 AM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by Hafrust (Post 837765)
This post is for QVGA devices ONLY!!!

OK...here are the QVGA modified cpr files. I did NOT add the section for the "Settings" Panel b/c the values there in my VGA cpr's seemed odd and I was bound to screw it up if I tried converting it. If you want to enable the "Settings" panel, you will need to add that section to the Titanium_240x320 and Titanium_320x240 cpr's. You can compare the VGA versions I posted to these QVGA versions to see the difference between them. I don't have a QVGA device to test them on, so that's why I'm leaving it to you all. What these CPR's WILL allow you to do in their current state is add a new panel using the welcomecenter GUID, plus it will fix it to where your icons will be displayed.
Hafrust - just tested ur .cpr and they are the bomb - now i got everything to display - my contacts, my programs - everything and with the right pictures too...

one small problem though - my programs is a little off - as in it is indented a little bit outside and its not in line with the rest - what layout should i modify to get it to be in line.. ???

myshinynewtouch 04-11-2009 10:36 AM
Re: CHome/Titanium Modifications
 
Quote:
Originally Posted by Hafrust (Post 840829)
Yeah..."Getting Started" is what the welcomecenter panel is set to show by default. If you have the adjusted cwelcomecenter section in your .cpr it will show whatever you named the panel. I included that section in the qvga cpr files I posted if you want to take a look and try copying it into yours. I thought your ROM didn't have the registry entries for cwelcomecenter? Or am I confusing you with another Vogue user?
no ur not - i don't have welcome center - but i guess the GUID are still probably in the .dll file even though they are not visible on my today screen.. that means i can use the welcome center if i have the .cpr modified to use welcome center :) :) which is why i am able to use it as a contacts dialer... :) yahooooooo.....

now all i gotta do is tweak the my programs a little bit to align properly and i will have the proper .cpr and registry settings to keep....


All times are GMT -4. The time now is 10:46 AM.
Page 4 of 11 « First 23 4 56 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0