PPCGeeks
Page 21 of 52 « First 111920 21 222331 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Titan Development (http://forum.ppcgeeks.com/forumdisplay.php?f=57)
-   -   Step by Step tutorial for unlocking your device and cooking your own ROM!!! (http://forum.ppcgeeks.com/showthread.php?t=33857)

puff 09-04-2008 12:47 AM
Re: What file?
 
Quote:
Originally Posted by deboy_001 (Post 403454)
Wow Thanks for the fast reply! I did find the RUU in the folder. I was posting an edit as you were replying to this. I didn't know if I was able to run that while in splash screen because that's where I expect to be stuck with the gps radio and stock rom. Would I need to put in BL or do anything special... or is it really just plug up and run RUU? Thanks again!
If you flash via RUU it will put the phone into bootloader for you (you dont hafta do it)
but if you want to put in bootloader b4 you start the RUU, that's also fine (it wont hurt a thing)
oh and yes it's that EZ, just plug up and run RUU (make sure ran the unlocker first)

However, I recommend flashing via SD Card - only because its so much faster ;-)

deboy_001 09-04-2008 12:58 AM
Re: What file?
 
Quote:
Originally Posted by puff (Post 403455)
If you flash via RUU it will put the phone into bootloader for you (you dont hafta do it)
but if you want to put in bootloader b4 you start the RUU, that's also fine (it wont hurt a thing)
oh and yes it's that EZ, just plug up and run RUU (make sure ran the unlocker first)

However, I recommend flashing via SD Card - only because its so much faster ;-)
Thank you!! I will buy a 2gb tomorrow and flash via SD... as long as I find this RUU_signed.nbh.

deboy_001 09-04-2008 10:47 AM
Help/comfort
 
How long should the nueSPL2.47 take on the first try via SD? His pdf says 10 seconds, but I've been staring at it in BL for about 10 minutes now:(... What next? ](*,)

I think I did everything to the letter. It's like the first step, how did I mess it up? ](*,)

Edit: Started over... Same deal, stuck on the BL and says TITA100 SPL-2.07No2Chem Titan SPL EVT. I am currently trying it the "edited" way from your guide (i.e. unrar and run it from the device...). If this doesn't work, will the first way work (straight to SD and rename it)? :(

puff 09-04-2008 11:06 AM
Re: Help/comfort
 
Quote:
Originally Posted by deboy_001 (Post 403690)
How long should the nueSPL2.47 take on the first try via SD? His pdf says 10 seconds, but I've been staring at it in BL for about 10 minutes now:(... What next? ](*,)

I think I did everything to the letter. It's like the first step, how did I mess it up? ](*,)
It shouldn't take that long... i've still got olipro 2.40

deboy_001 09-04-2008 11:27 AM
Re: Help/comfort
 
Quote:
Originally Posted by puff (Post 403716)
It shouldn't take that long... i've still got olipro 2.40
Well thanks. I suppose I'll just try olipro and see if that will do it. Is there a big diff b/w the two?

Gosh... olipro wont work either... 2 tries. the RUU ends with an error

Oy... Neither unlocker wants to work for me... must be a sign :/

puff 09-04-2008 11:46 AM
Re: Help/comfort
 
Quote:
Originally Posted by deboy_001 (Post 403742)
Well thanks. I suppose I'll just try olipro and see if that will do it. Is there a big diff b/w the two?
well i see you found the NueSPL thread ;-)

Quote:
Originally Posted by no2chem
This SPL is not necessarily better than Olipro-2.40, however it is off a newer version of the SPL, Olipro-2.40 is from a SPL in September, this one is from a SPL in Feb. Because it is not MFG, it lacks some commands in bootloader.
I prefer having those commands in bootloader...

puff 09-04-2008 11:52 AM
Re: Help/comfort
 
Quote:
Originally Posted by deboy_001 (Post 403742)
Gosh... olipro wont work either... 2 tries. the RUU ends with an error

Oy... Neither unlocker wants to work for me... must be a sign :/
are you running vista or xp? what is the error you're getting?

deboy_001 09-04-2008 12:06 PM
Re: Help/comfort
 
Quote:
Originally Posted by puff (Post 403777)
are you running vista or xp? what is the error you're getting?
Running XP. The error is Error[262]: update error.

puff 09-04-2008 12:09 PM
Re: Help/comfort
 
Quote:
Originally Posted by deboy_001 (Post 403794)
Running XP. The error is Error[262]: update error.
this might sound silly, but did you try a soft reset?

Quote:
This error occurs during the CE ROM code upgrade process.

Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.

Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
-> Common RUU Error Messages

Midnght_J 09-04-2008 12:54 PM
Re: Step by Step tutorial for unlocking your device and cooking your own ROM!!!
 
tHIS IS SOME ROCK SOLID TUTORIALS. I LUV THE SD ONE IT WORKED LIKE A CHAMP. U R DA MAN. tHANKS TO ALL AT THE PPCGEEKS. yOU ALL ROCK!!!!


All times are GMT -4. The time now is 06:56 PM.
Page 21 of 52 « First 111920 21 222331 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0