Titan 20226 kitchen

[rsbrown69]

I have notices a few problems with the OEM's and this ROM.

• HTC Album will not run, comes up with a "cannot be oppened. either it is not signed with a trusted certificate...."
  • When I used a cab from another thread I ended up locking up the phone several times and strange characters appeared in the file lists
• YahooGo2 has a difficult time opening, it took me about 10 tries to enter in the username and password, it kept failing login and then would immediately close
• Windows Live will not allow you to sign in to the live account, only the messenger account but with no way to enter in a username.
• Sprint music store fails to run same error message as HTC Album

[Robtao]

Originally Posted by Giovanny

I was having problems with the beam feature, windowslive with IM, and TCPMP. This is a great ROM for those who do not use this features. The only find I had was the Windows live wih IM and here is the CAP. All you have to do is install to your memory card, soft reset, and install the cap to device and you're all set. I found this cap at XDA and the thanks goes to Throy.

TCPMP broke for me too. But I had a cab that seems to be working. Don't remember where it came from, though. TCPMP-0[1].72RC1-ARM-PPC-recomp-01.CAB.

Edit: OK. Here it is: http://forum.ppcgeeks.com/showthread...RC1#post350069
Looks like it is updated to 03, which I haven't tried, so I guess I will leave 01 here just in case it works better.

[joojoobee666]

You know what I just noticed? I am missing the "Wireless LAN" option under connections tab, and cannot adjust my wireless power mode...no wifi for me. Any suggestions? Possibly a cab file I can install?

[joojoobee666]

NM...FIXED!!!=D> Registry Settings here can be used to fix if anyone else has this problem -> http://www.mobilitysite.com/boards/i...uilt-wifi.html

Quote from page, just use HKEY_LOCAL_MACHINE\Comm\TNETW12511\Parms instead:

"Everything's in the registry, under HKEY_LOCAL_MACHINE\Comm\tiacxwln1\Parms

dot11PowerMode (0,1,2) - Default 2 - 0 is Continuous Access Mode, 1 is Maximum Power Save, 2 is Fast Power Save
HTCPowerMode (0,1,2) - Default 2 - Same thing, specific to HTC devices?

I changed both to 0 (HTCPowerMode was set to 2, dot11PowerMode was not present) and this fixed my problem with WiFi."

[dalepl]

I have a problem with MMS with the new Kitchen. In previous Kitchens MMS worked just fine. I am on Alltel and have tried both versions of the ArcSoft included on in the Kitchen. If I install version 5 and go to settings, there is no server listed. If I enter and save one, it will show the one I entered and DEFAULT. If I go back into the one I entered, the settings will be incorrect. If I enter the correct settings I get two Alltel servers and both get selected as DEFAULT. The DEFAULT server is also listed and none can be deleted. When I try to send an MMS, I get 0% and it never goes out.

If I install version 3 of ArcSoft and go to settings, only a default server is listed. If I enter the settings for Alltel and make it my default server and try to send a picture message, again it does not go out and gives me a send failure.

Please let me know how to fix this issue. I have tried all the Titan Kitchens in the PPC Kitchen and all have the same issue. By the way, I have a PPC6800 and am trying to load 20226. I have radio version 3.42.30. Thanks for any assistance you can give.

[Robtao]

Originally Posted by miguelfp1

Here's the link to the dialer post: http://forum.xda-developers.com/show...3&postcount=15
Also, you will probably need to replace your current EtPhone.dll (Smartdialing DLL) with this one http://forum.xda-developers.com/show...4&postcount=27

That is a really nice dialer. I may switch from Blue Frog even when it works! See attached screenshots.
Hope I don't need the other file. Can't seem to get it to copy/paste into Windows. Edit: Got it, added Smart Dialing and screen shot 3.

Originally Posted by Robtao

That is a really nice dialer. I may switch from Blue Frog even when it works! See attached screenshots.
Hope I don't need the other file. Can't seem to get it to copy/paste into Windows. Edit: Got it, added Smart Dialing and screen shot 3.

Really like this dialer, but the ##codes don't work with my current build (20226 Kitchen built).

[mettercomputers]

Originally Posted by dalepl

I have a problem with MMS with the new Kitchen. In previous Kitchens MMS worked just fine. I am on Alltel and have tried both versions of the ArcSoft included on in the Kitchen. If I install version 5 and go to settings, there is no server listed. If I enter and save one, it will show the one I entered and DEFAULT. If I go back into the one I entered, the settings will be incorrect. If I enter the correct settings I get two Alltel servers and both get selected as DEFAULT. The DEFAULT server is also listed and none can be deleted. When I try to send an MMS, I get 0% and it never goes out.

If I install version 3 of ArcSoft and go to settings, only a default server is listed. If I enter the settings for Alltel and make it my default server and try to send a picture message, again it does not go out and gives me a send failure.


Thanks for any assistance you can give.

Having the same problem had to go back to stock and it works. Then recooked flash not working so i am back to stock again until this can be answered. Have tried several suggestions given here with not working.
Was working great on 19888 and 5069 then I went to the newest and now can only do MMS on Stock. Hopefully Someone can help us Alltel folks.
Please let me know how to fix this issue. I have tried all the Titan Kitchens in the PPC Kitchen and all have the same issue. By the way, I have a PPC6800 and am trying to load 20226. I have radio version 3.42.30.

[GaMedic]

Originally Posted by Robtao

That is a really nice dialer. I may switch from Blue Frog even when it works! See attached screenshots.
Hope I don't need the other file. Can't seem to get it to copy/paste into Windows. Edit: Got it, added Smart Dialing and screen shot 3.

I tried this dialer and the har keys don't function correctly and it caused my data cnnection to constantly be connected. There was also another user that said 911 didn't work.

[alillowr]

Originally Posted by dthames

Where are we supposed to extract the file to? The actual file comes up as an unknown type.

I am getting this same problem when trying to solve the button mapping as instructed I put the file into my phone (my documents) but the file comes up as an unknown type. How do I "run" this file so that it fixes the registry to get my buttons working properly?