Re: chem's 5067 - hang on boot
 

I just want to confirm that 5067 WILL work with radio 3.35. That's what I've been running on my phone for weeks now.

Re: chem's 5067 - hang on boot
 

yes it will

Re: chem's 5067 - hang on boot
 

how long did u let it sit on first run of 5067?

I thought mine had frozen up too, but instead it took a bit longer to first boot. I just let it hang there a while and it went through.

Re: chem's 5067 - hang on boot
 

*sigh*

I'm is the same boat as the thread opener but I can't get it resolved.

I already have olipro 2.40
I installed the stock rom and then installed 5067 (kitchen) a few times already.
pulled out battery for a few minutes then hard reseted but it still hangs on the boot screen.

Just an update. it was completely my fault as I deleted an awkward named file from the kitchen which caused it to run weird.

Re: chem's 5067 - hang on boot
 

just to add the 2 cents:

I let it sit for almost 10 minutes when the freezing would occur. It would not go beyond the "second" boot screen no matter what I tried.

loading the 3.39 radio from the sd card is what I attribute this to. once I flashed the rom with the entire "leaked" rom with the password on the rar, it accepted the 5067 build I previously tried to apply to it.

Hope this helps anyone. It was a big surprise to me to see something go wrong with this stuff - :)

Copy

Re: chem's 5067 - hang on boot
 

oki ... so i have to copy TITAN.IMG on my micro-sd, then i bootload on it and it will flash the 5067 ... and then its supposed to work fine ?
cuz now my phone is still not passing the first HTC screen ...

Re: chem's 5067 - hang on boot
 

Take the battery out and then hard reset....should boot up fine...may take a little bit...approx 5 minutes

Re: chem's 5067 - hang on boot
 

nah the problem is that my phone isnt bugging on the seconde splash screen ... but it auto reset on the first screen ... ( the white or black HTC with the radio and rom )

Re: chem's 5067 - hang on boot
 

I suggest getting a ROM working (stock radio & ROM perhaps, then move onto the custom one of your choice) and then use a blank, newly formatted MicroSD card with only the radio upgrade file on it.
I already had 5067 running perfectly fine when I used my stock/extra mSD card for the radio upgrade.
Follow those instructions you found about formatting the mSD card (tested to work with FAT32 @ 4K clusters), renaming the radio upgrade file, and pressing power-camera-reset to enter the bootloader, etc...
Restarted and everything was the same except for the radio version.

Re: chem's 5067 - hang on boot
 

Same hangup problem when going to leaked 3.49 to no2chem 5067, worked after reflashing a second time and following ebb's 30 second battery pull + hard reset tip.