PPCGeeks
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Titan Development (http://forum.ppcgeeks.com/forumdisplay.php?f=57)
-   -   I think I bricked my Titan (http://forum.ppcgeeks.com/showthread.php?t=25751)

gguruusa 05-06-2008 05:34 PM
Re: I think I bricked my Titan
 
Refer to post #9 in this thread.

bakntyme 05-07-2008 03:57 AM
Re: I think I bricked my Titan
 
Quote:
Originally Posted by head honch (Post 272190)
Ok so my 6800 came with the latest radio 3.35 installed so all i had to do was run the unlocker which i did, but my phone kept reseting after tapping the screen.

so i figured that possibly loading the no2chem 6.1 rom would fix it and it worked great until i unplugged the phone then it went back to rebooting so this morning i woke up this morning and i tried to go back to the stock rom and while it was installing my computer froze while it was at 11%

....so now my phone just stays frozen at the Sprint screen and it now says 'No Radio' near the bottom of the screen is there anything i can do to salvage my phone? is there anyway to get to the tricolor screen so i can run the rom again....this sucks i literally just got my Mogul last Wednesday can anyone help me out....Thanks in advance
On the tri-color screen, what numbers do you see? It sounds like you might have used the wrong unlocker and you might have the 1.20 bootloader. You need the Olipro 2.40 to flash 3.xx ROMs. If you DO see 1.20 on the tri-color screen, you must flash a 2.xx OEM ROM, then install the Olipro 2.40 hard-SPL bootloader, then you can reflash the 3.35 OEM ROM and follow that with a custom ROM if you want to. You can flash an OEM ROM package from the bootloader (tri-color) screen, just ignore the wording about Activesync.

edit: to get into the bootloader (tri-color screen), hold down the Power and Camera buttons while pressing the stylus in to the reset hole until you see the tri-color screen.

head honch 05-07-2008 02:21 PM
Re: I think I bricked my Titan
 
Quote:
Originally Posted by bakntyme (Post 274176)
On the tri-color screen, what numbers do you see? It sounds like you might have used the wrong unlocker and you might have the 1.20 bootloader. You need the Olipro 2.40 to flash 3.xx ROMs. If you DO see 1.20 on the tri-color screen, you must flash a 2.xx OEM ROM, then install the Olipro 2.40 hard-SPL bootloader, then you can reflash the 3.35 OEM ROM and follow that with a custom ROM if you want to. You can flash an OEM ROM package from the bootloader (tri-color) screen, just ignore the wording about Activesync.

edit: to get into the bootloader (tri-color screen), hold down the Power and Camera buttons while pressing the stylus in to the reset hole until you see the tri-color screen.
So far i have the Olipro 2.41 bootloader...last nite when i finally got the OS to install and i had a phone again...i tried loading the 5060 kitchen and it wouldn't get past the boot screen although it installed correctly. Is this becuz i should run the Sprint 3.35 ROM first and then the kitchen or does it matter?

bakntyme 05-07-2008 04:55 PM
Re: I think I bricked my Titan
 
Quote:
Originally Posted by head honch (Post 274680)
So far i have the Olipro 2.41 bootloader...last nite when i finally got the OS to install and i had a phone again...i tried loading the 5060 kitchen and it wouldn't get past the boot screen although it installed correctly. Is this becuz i should run the Sprint 3.35 ROM first and then the kitchen or does it matter?
Since your phone said "No Radio", you need to install the Sprint OEM 3.35 ROM package to get the 3.35 radio installed, then you can flash a custom ROM over that.

O'Neil Mitchell 05-07-2008 11:29 PM
Re: I think I bricked my Titan
 
I want to join the club, I too have bricked my Titan. Its stuck in the tri colour. The display reads TITA100 SPL-1.20.0lipro

Spencer_Moore 05-07-2008 11:34 PM
Re: I think I bricked my Titan
 
you need bootloader 2.40 olipro get the right bootloader and try flashing again

nick aguas 05-08-2008 12:41 AM
Re: I think I bricked my Titan
 
Quote:
Originally Posted by O'Neil Mitchell (Post 275262)
I want to join the club, I too have bricked my Titan. Its stuck in the tri colour. The display reads TITA100 SPL-1.20.0lipro
We need a 'Jump to Conclusions' mat emoticon. Just like Tom Smykowski's from Office Space.

olipro 1.20 is outdated and no longer used by any current ROM's. do a search on olipro 2.40.

O'Neil Mitchell 05-08-2008 06:41 PM
Re: I think I bricked my Titan
 
There is only one big problem, because the phone is in Boolloader mode. Active Sync won't start up, so olipro 2.40. won't run ( No Device Connected )

OffUrRcker 05-08-2008 07:28 PM
Re: I think I bricked my Titan
 
Your phone is completely fine. Worst case scenario, you need to flash an Oli 1.2 capable rom from a fat32 formated microsd card, which is very easy to do, just search. Also, I believe somebody built a new unlocker that is SD card compatible, for Oli's 2.4. Either way, your phone is in prime condition.

tc32brat 05-08-2008 08:16 PM
Re: I think I bricked my Titan
 

if all else fails call sprint tell them you want insurance(incase you don't have it) then remove battery, insert phone in microwave, and let it rip for 3 seconds. go to sprint and tell them it won't work.....get new phone


All times are GMT -4. The time now is 04:44 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0