Titan Kitchen CE OS 5.2.19209 (Build 19209.1.0.2) aka 5060

[larcin]

Originally Posted by pdx77

As long as you have the lastest radio (3.35.05 for Sprint) (Which I think is required for the kitchen) you are going to have rev a.

I am using the 5060 WM 6.1 When I went in to EPST settings it said Rev. A. was disabled.

I Enabled it in there so fat my phone hasn't caught fire yet.

[tiermann]

Originally Posted by saylestk

Probabbly a stupid question, I tried to read through this entire thread for the answer, buy anyway... I have a XV6800 and previsously had a XV6700 and used the Kitchen a lot, love it. The radio update RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4 350H_SPCS_AM_Ship by name appears to be for Sprint. I have Verizon and just want to make sure this is good for Verizon as well. Does this radio update also give me GPS capibility?

Thanks,

You can use the sprint update to upgrade your radio, but don't let the sprint customizations run on your phone.

Easier to just grab the radio itself from the link in the opening post. It only contains the upgraded radio.

[tiermann]

Originally Posted by larcin

I am using the 5060 WM 6.1 When I went in to EPST settings it said Rev. A. was disabled.

I Enabled it in there so fat my phone hasn't caught fire yet.

Originally Posted by justpctech

this has been tested already. if you look at the way its worded;
by default it says Disable= which means it IS enabled at this time. setting it to Enable would put it in the disabled state, which you can prove by running speedtests with both setttings.
they could have picked a better way to word that for sure!

I guess it's a sprint thing?

[tiermann]

Originally Posted by fenton

Forgive me if this has already been addressed, but I searched for the answer to no avail.
Is there a more in-depth list of explanations for each of the module choices in the kitchen? The popup descriptions are helpful, but some are less than descriptive. I wouldn't be opposed to trying everything out myself, but I have a feeling some choices are above my head.

Right-click->View Website is available for most options.
There's also a growing library of screenshots you can get to by using the View menu.

[azclown]

Tierman - Are there any surefire methods to get SD flashing to work.... I can't seem to get it to flash the radio via the SD card... I have done the following....

Gone to a DOS box and used a command line: format g: /FS:FAT32 /A:1024 /X

This was to properly format the card. Then took the radio.nbh and moved it to the card in the root directory and renamed it to: TITAIMG.nbh

Then proceded to goto bootloader mode and it "should" have found the image and flashed it right??? But it flashes a gray screen REAL quick that says: Image not found

Can you help me figure out why I can't flash any image using this method.... thx

[tiermann]

TITAIMG is for ROM, not radio.

Also it's been reported that when flashing from SD, the card cannot be SDHC or bigger than 2gb.

[noreboy]

Originally Posted by justpctech

good question! they were talking about it earlier in kitchen chat, but i was at work and not really able to pay attention. from what i remember, wasnt too hard though.

looking at my chat logs, found this:
To make animated work, you have to include AnimatedSplash OEM in addition to selecting an image.
then under Boot Options, you must select the Startup Animation also.

Anybody figure this out?

[kaos]

Originally Posted by tiermann

TITAIMG is for ROM, not radio.

Also it's been reported that when flashing from SD, the card cannot be SDHC or bigger than 2gb.

not true when 3.35 first came out i flashed it from my sd to my phone no issues.I named it TITAIMG.nbh as well...also on a 8gb sdhc card...worked for me...but i formatted mine from a usb reader normally under my computer to fat32....i can comfirm it should work did for me..

Quote:
Originally Posted by justpctech
good question! they were talking about it earlier in kitchen chat, but i was at work and not really able to pay attention. from what i remember, wasnt too hard though.

looking at my chat logs, found this:
To make animated work, you have to include AnimatedSplash OEM in addition to selecting an image.
then under Boot Options, you must select the Startup Animation also.

Anybody figure this out?

yes it does work....i dropped mine in with resco..its not the normal spc_startup though..its under a different name....but if you unhide rom extentions with resco and search you will find it..

[jeffhatton]

Yes. I actually created my own OEM with the OEMizer. I copied the sprint animation to the windows directory on the phone and it overwrote the default animation. This can only be done through the OEM I have found since the file is protected when the phone is on ... meaning I couldn't replace it using activesync. It had to be placed there at the time the rom is being built. In this case, the sprint animation needs to be named wmstartup_ani.gif. It worked perfectly. I have not been able to get it to work correctly with the kitchen by selecting the animation. Must be a bug or something.

[pdx77]

Originally Posted by larcin

I am using the 5060 WM 6.1 When I went in to EPST settings it said Rev. A. was disabled.

I Enabled it in there so fat my phone hasn't caught fire yet.

Leave the settings set to disabled, it has been determined that when you select "enable" you are actually disabling rev a.