Data on TELUS WM6.1 GPS roms

[lifeisfun]

I just tried to upgrade the rom and I got message that it will upgrade to
Image Version DCD 1.6.10.
Is this the correct image ?

[a1jatt]

Yes it is the right image. I used one script file from DCD's kitchen ... i did not change that line because i was thinking i will be the only one to use this file.
After you flash you will see its wm6.1.

[lifeisfun]

Thanks for the confirmation !

[hlouie]

I've had no voice/data/GPS problems with the upgrade to CE ROM dcd 2.3.0/2.3.1 KITCHEN and RADIO ROM 3.27.00

One thing I have noticed with some older/other CE ROMS is username and password are required. What happens is the phone dials #777 over and over.

Set username/password
1. START-> SETTINGS-> CONNECTIONS-> CONNECTIONS-> TASK-> Manage existing connections
2. Edit CDMA1X #777
3. NEXT-> NEXT until username/password
4. username: areacodetelephonenumber@mb.telusmobility.com (ie 1235550987@mb.telusmobility.com)
5. password: esndec (ie the number on the phone under the battery)

Going to WM6.1
1. Hard-SPL-240-MFG.exe
2. Titan_Radio_3.27.00.exe
3. Run dcd 2.3.1 Kitchen
4. Wait 5min
5. Dial *22803
6. 1 for english / 2 for french
7. 1 for MSID MDN AKEY all that stuff
8. Wait 5min
9. Dial *22803
10. 1 for english / 2 for french
11. 2 for

Going to Original Rom
1. Titan_Relocker.exe (this restores original bootloader)
2. Telus_HTC_P4000_WM6_07252007.exe
3. Wait 5min
4. Dial *22803
5. 1 for english / 2 for french
6. 1 for MSID MDN AKEY all that stuff
7. Wait 5min
8. Dial *22803
9. 1 for english / 2 for french
10. 2 for PRL (preferred roaming list)

[lifeisfun]

Do I have to activate my P4000 before the *22803 update ?
I get message that my phone isn't eligible for over the air update.

[hlouie]

With the message "Phone isn't eligible for over the air update". Some say all this is not necessary, but it always works of me everytime. I've had instances where the autoprogram works but the roaming updates do not. Just power down, wait 5min and try again.

1. You need to physical power off and on (NOT SOFT RESET/HARD RESET) I just remove the battery and reinstall.
2. Wait 5min.
3. Then try the autoprogram mode *22803 1 1 , and don't forget the roaming update *22803 1 2.
4. Phone out to a local number

YOU NEED TO BE IN YOUR LOCAL DAILING AREA and EVDO or 1X

[lifeisfun]

So if I have to dial local # I have to activate the phone first - right ?

[hlouie]

Sorry your right, I'll change the post.

[a1jatt]

Telus is fixing their system. Sometimes its down ( mostly weekends) .
If you can make and recive calls you dont have to do *22803.
Other option is you can do it manually. i belive its ##mslcode# .. you have to know your MSID and MDN. which can be found from an old telus phone if you had one on your account or you should note it down before you flash.

If you Unlock - > update OS rom then update radio , chances are your settings will stay intact.

[lifeisfun]

Can you please tell me how to get MDN # ?
I got the MSID ( my phone#) using EPST in windows folder
but I can't find the MDN

Thanks