Hey there,
Someone said that 3.16.651.0 wasn't real and so the thread was closed. Well, it IS real, and GPS works with Google Maps!!!!! It's not 6.1 unless it just says 6.0 and is '6.1' behind the scenes. Memory isn't great, around 20MB or so free. I'd like to have more around 23-25, but I'll take GPS. Here are some screenshots I made so you won't flame me.
You can't see the radio version too well in the second pic, but it's 3.27
Also, I don't post on here much, but have been a member over at XDA since 06, so I'm not just some random scam artist.
************EDIT**************
For those who waited patiently, here you go. If you like this file, give me some rep by tipping the scales. Thanks everyone!
PLEASE LISTEN TO THIS HOWEVER BEFORE UPGRADING!!!!!!!!
* You MUST have either a stock bootloader or a re-locked bootloader for this to work properly. otherwise, you'll get crashes during the upgrade process. The installer seems a little flakey, so just remember to have the titan_exitbl app if you get stuck in bootloader mode. then, just boot back into your old ROM and try again. you'll get there, mine failed four times before I got it right.
*search for ImCoKeMaN's re-locker on this forum to find the relocker SPL with accompanying titan_exitbl app.
This ROM so far seems great with Battery Life and my Bluetooth clarity is better than any other ROM I've tried so far. I chose to install everything first, and then I did a hard reset and skipped the customizations. I also upgraded my PRL by downloading the 60611.prl file and using ##PRL# function to install it.
Without further ado:
FAST Mirror --
http://lookatmylog.com/phonetools/SPCSTITANROM_3_1.zip
FAST Mirror --
http://www.geek-pages.com/rom/RUU_TI...SPCS_NV124.zip
FAST Mirror --
http://www.mediafire.com/?3iplvzbhxxn
http://rapidshare.com/files/86139116...SPCS_NV124.zip <-- somehow the file inside the zip is missing the second 'e' on .exe, so just rename the file and type the last 'e' in there. Then you should be good to go to open the executable. Enjoy!
EDIT by ImCoKeMaN:
The old unlocker doesn't work with this rom, get the update here:
http://forum.ppcgeeks.com/showthread...746#post168746
If you only want the essentials and to remain unlocked you might want to check out this post by shadowmite:
http://forum.ppcgeeks.com/showthread...441#post168441
I have found that if you have issues where your device seems to be bricked and stuck in bootloader before completion of the update you can fix it by flashing via SD card.
To do this there are 3 steps:
First take the .exe file and open it with winrar. There will be a file 3.16.....nbh extract that and rename it to TITAIMG.nbh
Next format a microSD card with FAT 32 (required most are fat16 default) and copy the file TITAIMG.nbh to the root of the sd card with a card reader.
Finally place sdcard in device and reset into bootloader mode. The flash will proceed from the SD card and it should work fine. Enjoy!
End ImCoKeMaN Edit
http://img174.imageshack.us/img174/6...0973gv1.th.jpg
http://img210.imageshack.us/img210/8...0962cd6.th.jpg
http://img165.imageshack.us/img165/5...0966pw2.th.jpg
http://img223.imageshack.us/img223/3...0967ca2.th.jpg