Originally Posted by nbaj2k (Post 213456)

Help! I'm just trying to load the new stock ROM on, I'm now stuck with it saying 1.20 Olipro, resetting doesn't do anything, I want to load on the new Stock ROM that came out just to get it working, I just had it on a few minutes ago, but tried to then unlock it and load the latest NueChem on it, now I'm just stuck.

The relocker says no device connected, i disabled activesync and it still doesn't find it.

I have some important phone calls that are going to be coming in tomorrow and its 2AM and I'm stuck!

Can someone help? I had tried to load the latest ROM which originally worked and then load the latest nueChem (5053 I believe) but the phone started resetting over and over.

Thanks,

~J

Originally Posted by ImCoKeMaN (Post 125160)

From the creator of the wm5 "upgrades" for the wm6 Titan comes a relocker to undo the Hard-SPL.

This is compatible with windows XP, please do not use on Vista at this time (unless you are sure you have modaco drivers installed)!

This program will flash a stock 1.06 bootloader to your device to remove the Hard-SPL. In general if you don't understand exactly what this is doing it probably is not for you. It does not give you any additional features, but it might make you feel more comfortable if you are getting warranty work done.

Run the exe and follow EVERY step of the instructions and you should be good to go. If you get stuck in bootloader with vista read the stuck in bootloader thread for links to different drivers. Other then that the standard disable USB in activesync will allow the included exit bootloader program to work.

Thanks go to Olipro for the help with the original Hard-SPL, I also used his modification to the Pof JumpSPL for the loader.
Thanks to Colonel and Luv2chill for testing and helping to clear up my poor instructions

and the link:

ftp://ppcgeeks:ezupload@up.ppcgeeks....n_Relocker.exe


Notes:

Has run fine on Vista for myself and others, but it might be good to have an xp box too

USB must work for this to flash, if you are worried about USB issues you should run this before it becomes a problem.

Make sure you are comfortable with exit bootloader steps first (disabling USB activesync and making sure you have the right drivers if in vista)

Flashing a rom will also exit bootloader and can be done from the 3 color screen.

CPLD-9 is just part of the stock 1.06 bl (from sprint 2.16) do not be worried by that. Also RUUNBH in top right corner will go away next time you enter BL

Originally Posted by gonedigital (Post 215450)

he link is not working

Originally Posted by bakntyme (Post 213603)

3.xx ROMs are not compatible with Olipro 1.20. Flash the 2.17 official ROM package which is compatible with Olipro 1.20; then install Olipro 2.40 and flash the new official 3.35 ROM package. Then you can flash the custom ROM if you wish.

1. Reset into bootloader (power-camera-reset)
2. Flash official 2.17 ROM package (ignore bit about activesync)
3. Install Olipro 2.40 hard-SPL
4. While in bootloader screen, flash official 3.35 ROM package (ignore bit about activesync)
5. (optional) Flash nueROM

Originally Posted by nbaj2k (Post 216660)

Thanks, i got the Official 3.35 package after following these steps.

I then tried to load the latest nueRom 054, it loads fine, but when the phone resets after I load it, it gets stuck on the HTC screen and doesn't go any farther. I know the radio is right as when it loads up it says 3.35. Is there a step I'm missing?

Thanks,

~J

Originally Posted by ImCoKeMaN (Post 125160)

From the creator of the wm5 "upgrades" for the wm6 Titan comes a relocker to undo the Hard-SPL.

This is compatible with windows XP, please do not use on Vista at this time (unless you are sure you have modaco drivers installed)!

This program will flash a stock 1.06 bootloader to your device to remove the Hard-SPL. In general if you don't understand exactly what this is doing it probably is not for you. It does not give you any additional features, but it might make you feel more comfortable if you are getting warranty work done.

Run the exe and follow EVERY step of the instructions and you should be good to go. If you get stuck in bootloader with vista read the stuck in bootloader thread for links to different drivers. Other then that the standard disable USB in activesync will allow the included exit bootloader program to work.

Thanks go to Olipro for the help with the original Hard-SPL, I also used his modification to the Pof JumpSPL for the loader.
Thanks to Colonel and Luv2chill for testing and helping to clear up my poor instructions

and the link:

ftp://up.ppcgeeks.com/Titan/Users/ImCoKeMaN/Titan_Relocker.exe


Notes:

Has run fine on Vista for myself and others, but it might be good to have an xp box too

USB must work for this to flash, if you are worried about USB issues you should run this before it becomes a problem.

Make sure you are comfortable with exit bootloader steps first (disabling USB activesync and making sure you have the right drivers if in vista)

Flashing a rom will also exit bootloader and can be done from the 3 color screen.

CPLD-9 is just part of the stock 1.06 bl (from sprint 2.16) do not be worried by that. Also RUUNBH in top right corner will go away next time you enter BL

Originally Posted by gonedigital (Post 218004)

i just ran the titan relock. i have the red green and blue screen with RUUNBH INN UPPER RIGHT AND TITA100, SPL-1.06.0000, SPLD-9 IN UPPER RIGHT.
i tried to install the new rom update and after downloading when i ran it it stted that the version was corrupt.
i tried to reinstall the rom i had on it before and activesync says it is not connected... how do i get the antivesync to recognize the phone so i can install the update