Re: New TF3D HD port.
 

Can't at this point and by what has been done so far and talked about at XDA I doubt this is a reality any time soon.

Re: New TF3D HD port.
 

Here is what I posted at XDA with the new loader and fixes.

XBOXmod,
First and foremost, THANK YOU! The fact that you are continuing updates is very encouraging, thank you for staying with it and making this not just a hope but a reality!!!

Ok here is exactly what I have done for an install step by step and the results. I am using a Sprint Touch Pro stock rom ver. 1.03.651.4, (which is newer than my previous device, I just got a new one from sprint)
first I;
-started with a clean rom setup after hard reset
-installed net cf 3.5 on to device
-turned off TF3D in settings
-install the "XBmod HD MANILA.cab" on device, about 10 minutes with auto restart and upon restart I got the previous error page
-Went into setting again to make sure TF3D is still turned off
-installed the "hd additional tabs.cab" on device, no reset yet
-installed the "FIX V5.cab" on device, no reset yet
-installed the "XBmod Manila HD loader3.cab" to device
-soft reset

this is the error I used to get at the begining of this tread, post #33 http://forum.xda-developers.com/showthread.php?t=470164

Now after restart I get this screen exactly as you show in this link
http://nsa04.casimages.com/img/2009/...1053554682.jpg
http://forum.xda-developers.com/showthread.php?t=460295

But after continually tapping on the "Start Manila" option nothing happens except the wait cursor comes up for about 2 seconds. I then hit the ok button in the top right corner and the "Start Manila" button disappears and the screen is blank and nothing loaded. I then go into settings and re-enable TF3D. I now get "tap here to launch TouchFLO 3D" message at the top of the screen. When I tap I get "Launching TouchFLO 3D" it begins cycling by it self back and forth between these two messages for 6 times and then stops at "tap here to launch TouchFLO 3D"

now I am stumped as to what to do next.

Re: New TF3D HD port.
 

Finally I've got HD on a stock sprint rom. See my post at XDA below. There is still issues but my foot is in the door! No one should do this unless your are prepared to possible need to do a hard reset.


SUCCESS!!! first time I can see Manila HD on a stock Sprint rom, THANK YOU!

First, you should not be sorry for anything, Thanks thanks thanks.
Second I gave false information that was the cause of the problem and your cab helped me understand. When I said

Quote:
Now after restart I get this screen exactly as you show in this link
http://nsa04.casimages.com/img/2009/...1053554682.jpg
that is NOT entirely true the screen starts like that BUT the keyboard auto closes, leaving only the the "Start Manila" button and NO keyboard. When I used your new manual start cab and first had the keyboard open while using the manual start then it finally started for me, thanks and I hope some of this information helps you create a automatic fix for others. the way I see it is it just simply boils down to the keyboard fault creating an error or stopping manila hd to load.

Re: New TF3D HD port.
 

i had the same issue. If you read the post on the xda site it tells you how to fix it.

if you have meteo bug try to delete
My device/Application Data/HTC/databases/forecast_cache.db

Re: New TF3D HD port.
 

This is correct and works.
go to My device/Application Data/HTC/databases and delete the file forecast_cache.db

Re: New TF3D HD port.
 

Moved screen shot to themes page.

Re: New TF3D HD port.
 

If anyone can help with get a cab that can change the text for the comm manager and sound settings tabs to white instead of any black I would appreciate it. I am going to modifying the heck out of this thing and will let you guys know how it works out.

Re: New TF3D HD port.
 

Thanks for the screen shots....I am definitely going to do this, once they get the resizing issues fixed.

Will you still be able to add your own icon sets like you could before? I guess someone would need to make a customized stock tab now....

Thanks again.

Re: TF3D HD port 1/17/08 update
 

You may want to link a pic of your Programs menu from the ALL PROGRAMS list. It is really awkward looking with the size issues.

Re: TF3D HD port 1/17/08 update
 

You are correct but I don't use this screen a whole lot but here is a screen shot so everyone knows.
http://i429.photobucket.com/albums/q...creen01-12.jpg

EDIT: This is now fixed

Re: TF3D HD port 1/17/08 update
 

might want to change the topic title to 2009

Re: TF3D HD port 1/17/09 update
 

Do you have a cab file for just the People and Profiles Tabs? I'm not interested in any of the rest

Re: TF3D HD port 1/17/09 update
 

Sorry no, go to the author page the link is in the first post and leave him some feedback and request. I don't think this is on his plate because of all the small issues that have to be worked on.

Re: TF3D HD port 1/17/09 update
 

Im lovin the extras that manilaHD has. I like the additional tabs on the people tab. Thats what got me to try it.
I installed on a fresh flash from the Calku's kitchen without any manila installed at all.

Takes a little bit to load after a soft reset and I dont like the keyboard popping up. But Ill deal with it, its not that annoying.

I looked in the cab file and he has mortscript. Why?? Only says to run manila.exe on startup. I havent tried to remove yet and just put a shortcut in windows\startup.

But what I dont have is the tab customizer. Its just not there, Ive been looking for it for a few days now and up until today I had to idea where it was. I seen a screenshot of the settings tab with it in it but mine is missing. No worries TF3D Config still works just most of the tabs are unknown.

fat boy calendar fix?
 

fat boy I read the other day a new clock that enables a fix for calendar appointments http://forum.ppcgeeks.com/showthread.php?t=48780 do not know if it can be put in this rom.

Re: TF3D HD port 1/17/09 update
 

I believe he left out the tab customizer in his last upgrade, so you're not the only one. thanks for the info this will help other.

Re: fat boy calendar fix?
 

thanks I am going to check into this!

Re: fat boy calendar fix?
 

If you install the additional manila tabs that is on his post you lose the new tab organizer. He warns you about that.

quote:
To add call history,calendar,comm manager & sound tab:

install additional tabs.cab
warning this remove the rearrange tool in settings!!
to change tab order use Diamond TF3D Config 0.6.7.
additionnal tab can cause stability problem

Re: TF3D HD port 1/17/09 update
 

any idea when the landscape will work for touch pro?

Re: TF3D HD port 1/17/09 update
 

Flashed a new rom today..

Tried to install without mortscript like I said earlier. Doesnt work. Look like it loads then nothing comes up on the screen.

Instead of installing the cabs seperatly I combined the two cabs and loaded it as one. I get the tab organizer but crashes TF3D after I exit. Probably has something to do with combining the two cabs. Oh well Ill continue to use TF3D if I need to move tabs around but I dont think so I edited the 26948339 manila file to move and take out tabs that I dont want so its to my liking when I first install.

Re: TF3D HD port 1/17/09 update
 

after I installed this I lost my phone option. I can recieve but I have no way to make calls. when I hit the phone key i dont get the dailer and when I select the screen button or menu for phone it doest load either. any ideas?

Re: TF3D HD port 1/17/09 update
 

of course it will crash, it just edited a manila file... it crashes to reboot the manila so the changes occure

Re: TF3D HD port 1/17/09 update
 

Add your city and go to another tab and then back again. If you have issues try to list what rom you are using even if it is stock...........it all makes a difference.

Re: TF3D HD port 1/17/09 update
 

flash to the stock rom or list the rom you are using.

Re: TF3D HD port 1/17/09 update
 

Currently there is an issue with the clock freezing up and it seems TF3D unloads at midnight.

Re: TF3D HD port 1/19/09 update
 

New version already with clock fix ver. 1.6 all fixes and the newest loader are included in the update.

Re: TF3D HD port 1/19/09 update
 

Clock still doesnt seem to be working for the Touch Pro

Re: TF3D HD port 1/19/09 update
 

For those of you wondering if you can configure HD like before so far I have not had any problems and have changed clocks, sliders, icons, tabs, and fonts.


http://i429.photobucket.com/albums/q...Screen03-4.pnghttp://i429.photobucket.com/albums/q...e/Screen04.png
http://i429.photobucket.com/albums/q...Screen05-3.pnghttp://i429.photobucket.com/albums/q...Screen06-1.png


I really want to finish this theme in RED if someone could help that knows how to graphically edit manila files, I would appreciate some help to come up with the first red HD theme. I will give you the files and most of it is already done.

Re: TF3D HD port 1/19/09 update
 

this is promising work... hope it gets ironed out soon...

Re: TF3D HD port 1/19/09 update
 

Yea I would use it but the launcher was driving me insane!

Re: TF3D HD port 1/19/09 update
 

Its not ready for prime time but it is really getting close and I love just playing in it.

Re: TF3D HD port 1/19/09 update
 

I just want the contacts page...

Re: TF3D HD port 1/19/09 update
 

Like i said I would only want to know when he will make a better launcher

Re: TF3D HD port 1/19/09 update
 

That looks GREAT! How did you do it?

Re: TF3D HD port 1/19/09 update
 

duplicate

Re: TF3D HD port 1/19/09 update
 

You can use your same cabs as before to make the changes. If you not familar with changing clocks etc. then read this thread first.
http://forum.ppcgeeks.com/showthread.php?t=41350

I will be packaging up my theme when I get the last of the manila files edited.

Re: TF3D HD port 1/19/09 update
 

what the heck, duplicate again

Re: TF3D HD port 1/19/09 update
 

you terrible person :)

And FYI you can delete posts by clicking edit> delete

Re: TF3D HD port 1/19/09 update
 

Is there a proper uninstall method for this?

Re: TF3D HD port 1/19/09 update
 

I have not been able to uninstall. I've only used a hard reset.